H3C S5100-SI[EI] Series Ethernet Switches Operation Manual-Release 220X series(V1.05)
Manual Version
20100115-C-1.05
Product Version
Release 220X series
Organization
This manual is for the software version of Release2200, Release2201 and Release2203P08 of the S5100-SI/EI series products.
The supported features are different between these software versions. For details, refer to the table bellow:
|
Software Version |
Added and Modified Features Compared With The Earlier Version |
Manual |
|
|
Release 2203P08 |
Added features |
RADIUS Attribute Ignore Function |
15-AAA |
|
DHCP Relay Agent Function |
18-DHCP |
||
|
The S5100-SI series begin to support Layer 2 ACLs from Release 2203P08 on The S5100-SI series begin to support assignment of ACLs to hardware for packet filtering from Release 2203P08 on |
19-ACL |
||
|
Configuring the network management interface for a cluster ( S5100-EI series only ) |
23-Stack-Cluster |
||
|
UDP Helper Function |
38-UDP Helper |
||
|
Access Management Function |
39-Access Management |
||
|
Modified features |
The tx-period-value argument of dot1x timer tx-period command ranges from 1 to 120, instead of 10 to 120(in seconds). |
14-802.1x and System Guard |
|
|
Deleted features |
The S5100-EI series Ethernet switches do not support to specify a secondary IP address of an interface |
17-IP Address and Performance |
|
|
Release 2201 |
Added features |
Identifying and Diagnosing Pluggable Transceivers |
32-System Maintenance and Debugging |
|
Modified features |
None |
— |
|
|
Deleted features |
None |
— |
|
|
Release 2200 |
— |
— |
— |
To read the whole book, click the link below; to read the individual chapters, click the links on the left.