The S9500 series are modular switches that
are designed following industry standards. The series can be equipped with
these types of LPU modules:
l
XP2 module: provides two 10GEBase-R XFP/LC/10GEBase-W
XFP/LC optical ports
l
XP4 module: provides four 10GE XFP/LC optical
ports (1:2 convergence)
l
XK1 module: provides one 10 GE XENPAK/SC optical/electrical
port
l
GP12 module: provides 12 1000 Mbps SFP/LC
electrical/optical ports
l
GP24 module: provides 24 1000 Mbps SFP/LC
optical ports
l
FP20 module: provides 20 100 Mbps SFP/LC
optical ports
l
F32G module: provides four 1000 Mbps SFP/LC optical
ports and 32 10/100 Mbps auto-sensing RJ-45 ports
l
GT24 module: provides 24 10/100/1000
Mbps auto-sensing RJ-45 ports
l
GV48 module: provides 48 10/100/1000 Mbps
PoE-capable auto-sensing RJ-45 ports
l
FT48 module: provides 48 10/100 Mbps
ports
l
P4G8 module: provides eight 1000 Mbps SFP/LC
optical ports and four 155 Mbps SFP/LC POS optical ports
l
SP4 module: provides four OC-48c SFP/LC POS
optical ports
l
UP1 module: provides one OC-192c XFP/LC POS
optical port
The XP2 module provides two 10GEBase-R XFP/LC/10GEBase-W
XFP/LC optical ports.
Table 2-1 XP2 module specifications
|
Attribute
|
XP2
|
|
CPU
|
MPC8245
|
|
Boot ROM
|
512 KB
|
|
SDRAM
|
128 MB/256MB
|
|
Dimensions (L W)
|
366.7 340 mm (14.4 13.4 in.)
|
|
Max. power consumption
|
87 W
|
|
Number of
ports
|
Two
|
|
Connector
|
XFP/LC
|
|
Rate
|
10 Gbps
|
Figure 2-1 XP2 module panel
The XP2 module has two LEDs for each optical
port on its panel.
Table 2-2 1000 Mbps optical port LEDs on
the XP2 module
|
LED
|
Status
|
|
LINK
|
OFF
|
No link is present.
|
|
Green
|
A link is present.
|
|
ACT
|
OFF
|
No packets are transmitted/received on
the port.
|
|
Orange blinking
|
Packets are being transmitted/received on
the port.
|
The XP2 module provides two 10 Gbps XFP optical
ports. To provide optical ports, you can use these XFP optical modules.
Table 2-3 Optical interface modules available for the XP2 module
|
SFP module
|
Central wavelength
|
Connector
|
Matching cable
|
Transmission distance
|
|
10GBase-SR/SW-XFP
|
850 nm
|
LC
|
50/125 m
multimode optical fiber cable
|
26 m (85.3
ft) for the 62.5 m MMF w/ 160MHz*km cable;
82 m
(269.0 ft) for the 50 m MMF w/ 500MHz*km cable;
300 m (984.3
ft) for the 50 m MMF w/ 2000MHz*km cable
|
|
10GBase-LR/LW-XFP
|
1310 nm
|
9/125 m single mode optical fiber cable
|
10 km (6 mi)
|
|
10GBase-ER/EW-XFP
|
1550 nm
|
9/125 m single mode optical fiber cable
|
40 km (25 mi)
|
The XP4 module provides four 10GE XFP/LC
optical ports (1:2 convergence).
Table 2-4 XP4
module specifications
|
Attribute
|
XP2
|
|
CPU
|
MPC8245
|
|
Boot ROM
|
512 KB
|
|
SDRAM
|
128 MB/256MB
|
|
Dimensions (L W)
|
366.7 340 mm (14.4 13.4 in.)
|
|
Number of ports
|
Four
|
|
Max. power consumption (with bottom
plate)
|
160 W
|
|
Connector
|
XFP/LC
|
|
Rate
|
10 Gbps
|
Figure 2-2 XP4
module panel
The XP4 module has two LEDs for each optical
port on its panel.
Table 2-5 1000
Mbps optical port LEDs on the XP4 module
|
LED
|
Status
|
|
LINK
|
OFF
|
No link is present.
|
|
Green
|
A link is present.
|
|
ACT
|
OFF
|
No packets are transmitted/received on
the port.
|
|
Orange blinking
|
Packets are being transmitted/received on
the port.
|
The XP4 module provides four 10 Gbps XFP optical
ports. For more details about XFP optical modules, see Table
2-3.
The XK1 module provides one 10GE XENPAK/SC optical/electrical
port.
Table 2-6 XK1 module specifications
|
Attribute
|
XK1
|
|
CPU
|
MPC8245
|
|
Boot ROM
|
512 KB
|
|
SDRAM
|
128 MB/256 MB
|
|
Dimensions (L W)
|
366.7 340 mm(14.4 13.4 in.)
|
|
Max. power consumption
|
45 W
|
|
Number of ports
|
One
|
|
Connector
|
XENPAK/SC
|
|
Rate
|
10 Gbps
|
Figure 2-3 XK1 module panel
The XK1 module has two port LEDs for the 10GE
port on its panel.
Table 2-7 Port LEDs on the XK1 module
|
LED
|
Status
|
|
LINK
|
OFF
|
No link is present.
|
|
Green ON
|
A link is present.
|
|
ACT
|
OFF
|
No packets are transmitted/received on
the port.
|
|
Orange blinking
|
Packets are being transmitted/received on
the port.
|
The XK1 module provides one 10GE XENPAK/SC optical
or electrical port. You can use these XENPAK optical modules.
Table 2-8 Interface modules available
for the XK1 module
|
SFP module
|
Central wavelength
|
Connector
|
Matching cable
|
Transmission distance
|
|
10GBASE-SR-XENPAK
|
850 nm
|
SC
|
Multimode optical fiber cable
|
26 m (85.3 ft) for the 62.5 m MMF w/ 160MHz*km
cable;
82 m (269.0 ft) for the 50 m MMF w/ 500MHz*km
cable;
300 m (984.3 ft) for the 50 m MMF w/ 2000MHz*km
cable
|
|
10GBASE-LR-XENPAK
|
1310 nm
|
Single mode optical fiber cable
|
10 km (6 mi)
|
|
10GBASE-ER-XENPAK
|
1550 nm
|
40 km (25 mi)
|
|
80 km (50 mi)
|
The GP12 module provides 12 1000 Mbps SFP/LC
optical ports.
Table 2-9 GP12 module specifications
|
Attribute
|
GP12
|
|
CPU
|
MPC8245
|
|
Boot ROM`
|
512 KB
|
|
SDRAM
|
128 MB/256 MB
|
|
Dimensions (L W)
|
366.7 340 mm (14.4 13.4 in.)
|
|
Max. power consumption
|
55 W
|
|
Number of ports
|
12
|
|
Connector
|
SFP/LC
|
|
Rate
|
1000 Mbps
|
Figure 2-4 GP12 module panel
The GP12 module has two LEDs for each port
on its panel.
Table 2-10 Port LEDs on the GP12 module
|
LED
|
Status
|
|
LINK
|
OFF
|
No link is present.
|
|
Green
|
A link is present.
|
|
ACT
|
OFF
|
No packets are transmitted/received on
the port.
|
|
Orange blinking
|
Packets are being transmitted/received on
the port.
|
The GP12 module can provide 12 1000 Mbps
optical ports. You can use these SFP optical modules:
Table 2-11 Interface modules available
for the GP12 module
|
SFP module
|
Central wavelength
|
Connector
|
Matching cable
|
Transmission distance
|
|
1000BASE-SX-SFP
|
850 nm
|
LC
|
50/125 m multimode optical fiber cable
|
550 m (1804 ft)
|
|
62.5/125 m multimode optical fiber cable
|
275 m (902 ft)
|
|
1000BASE-LX-SFP
|
1310 nm
|
9/125 m single mode optical fiber cable
|
10 km (6 mi)
|
|
1000BASE-LH-SFP
|
40 km (25 mi)
|
|
1000BASE-ZX-LR-
SFP
|
1550 nm
|
|
1000BASE-ZX-VR-SFP
|
70 km (43 mi)
|
|
1000BASE-ZX-UR-SFP
|
100km (62 mi)
|
The GP24 module provides 24 1000 Mbps SFP/LC
optical ports.
Table 2-12 GP24 module specifications
|
Attribute
|
GP24
|
|
CPU
|
MPC8245
|
|
Boot ROM
|
512 KB
|
|
SDRAM
|
128 MB/256MB
|
|
Dimensions (L W)
|
366.7 340 mm (14.4 13.4 in.)
|
|
Max. power consumption
|
100 W
|
|
Number of ports
|
24
|
|
Connector
|
SFP/LC
|
|
Rate
|
1000 Mbps
|
Figure 2-5 GP24 module panel
The GP24 module has two LEDs for each 1000
Mbps optical port on its panel.
Table 2-13 Port LEDs on the GP24 module
|
LED
|
Status
|
|
LINK
|
OFF
|
No link is present.
|
|
Green
|
A link is present.
|
|
ACT
|
OFF
|
No packets are transmitted/received on
the port.
|
|
Orange blinking
|
Packets are being transmitted/received on
the port.
|
The GP24 module provides 24 1000 Mbps optical
ports. For more details about SFP optical modules, see Table 2-11
The FP20 module provides 20 100 Mbps SFP/LC
optical ports.
Table 2-14 FP20 module specifications
|
Attribute
|
FP20
|
|
CPU
|
MPC8245
|
|
Boot ROM
|
512 KB
|
|
SDRAM
|
128 MB/256 MB
|
|
Dimensions (L W)
|
366.7 340 mm (14.4 13.4 in.)
|
|
Max. power consumption
|
50W
|
|
Port
|
20
|
|
Connector
|
SFP/LC
|
|
Rate
|
100 Mbps full duplex
|
Figure 2-6 FP20 module panel
The FP20 module has two LEDs for each port
on its panel.
Table 2-15 Port LEDs on FP20 module
|
LED
|
Status
|
|
LINK
|
OFF
|
No link is present.
|
|
Green
|
A link is present.
|
|
ACT
|
OFF
|
No packets are transmitted/received on
the port.
|
|
Orange blinking
|
Packets are being transmitted/received on
the port.
|
The FP20 module provides 20 100 Mbps SFP
optical ports. You can use these SFP optical modules:
Table 2-16 Interface modules available for the FP20 module
|
SFP module
|
Central wavelength
|
Connector
|
Matching cable
|
Transmission distance
|
|
100BASE-FX-MM-SFP
|
1310 nm
|
LC
|
50/125 m
multimode optical fiber cable
|
2 km (1
mi)
|
|
62.5/125 m
multimode optical fiber cable
|
|
100BASE-FX-SM-SFP
|
9/125 m
single mode optical fiber
|
15 km (9
mi)
|
|
100BASE-FX-SM-LR-SFP
|
40 km (25 mi)
|
|
100BASE-FX-SM-VR-SFP
|
1550 nm
|
80 km (50 mi)
|
2.8 F32G Module
The F32G module provides four 1000 Mbps SFP/LC
optical ports and 32 x 10/100 Mbps auto-sensing RJ-45 ports.
Table 2-17 F32G
module specifications
|
Attribute
|
F32G
|
|
CPU
|
MPC8245
|
|
Boot ROM
|
512 KB
|
|
SDRAM
|
128 MB/256 MB
|
|
Dimensions (L W)
|
366.7 340 mm (14.4 13.4 in.)
|
|
Max. power consumption
|
55 W
|
|
Number of ports
|
Four 1000 Mbps SFP/LC optical ports
32 x 10/100 Mbps auto-sensing RJ-45 ports
|
|
Connector
|
RJ-45, SFP/LC
|
|
Rate
|
10 Mbps, half/full duplex
100 Mbps, half/full duplex
1000 Mbps, full duplex
|
