>

Table of Contents

                                                      24端口10/100/1000BASE-TX RJ45电接口板-LSB2GT24DB0

单板标识

前面板右上角分别标有丝印:LSB2GT24DB0,用来标识对应的单板。

单板简介

                                                                                                                                                                                  1 单板属性

属性

规格

接口连接器类型

RJ45

接口数量

24

接口传输速率

10M/100M/1000Mbps

可选用线缆及最大传输距离

5类双绞线 传输距离 100m

单板适用的机型

S9502/S9505/S9508/S9508V/S9512

单板适用的主机软件版本

r1621及以上版本

 

注意事项

如主机软件版本不匹配,请联系该设备的销售商或集成商获取相应的主机软件版本;

单板安装说明及主机软件版本的升级方法请参见《H3C S9500系列路由交换机 安装手册》相关章节。

单板种类或规格可能随产品版本的变更而改变,请从公司网站http://www.h3c.com.cn主页上的“文档中心”获取最新资料。

 

 

杭州华三通信技术有限公司

 


                  24-Port 10/100/1000BASE-TX RJ45 Electrical Interface Card –LSB2GT24DB0

1  Card Identifier

The silkscreen, LSB2GT24DB0, are printed at the upper right corner of the front panel respectively to identify the cards.

2  Specifications

Table1  Card specifications

Item

Specifications

Connector

RJ45

Port quantity

24

Transmission rate

10M/100M/1000Mbps

Cable

Category 5 UTP

Maximum transmission distance

100m

Applied to

S9502/S9505/S9508/S9508V/S9512

Host software version

Version 1621 and above

 

3  Note

If the host software version does not match the one applicable to the card, contact the vendor or the integrator for the right version.

For the introduction of card installation and host software upgrade, see the related part in H3C S9500 Series Routing Switches Installation Manual.

As board types or specifications might change with product versions, you may need to obtain the latest documents from Technical Support & Document link on H3C website http://www.h3c.com.

 

 

Hangzhou H3C Technologies Co., Ltd

 

download