2端口10GBASE-R/W XFP 光接口板 – LSB1XP2
1 单板标识
LSB1XP2系列单板包括LSB1XP2B0、LSB1XP2CA0、LSB1XP2CB0、LSB1XP2DB0、LSB1XP2DC0。前面板右上角分别标有丝印：XP2B、XP2CA、XP2CB、XP2DB、XP2DC，用来标识特定的单板。
2 单板简介
属性 | 规格 |
接口连接器类型 | XFP/LC |
接口数量 | 2 |
接口传输速率 | 10Gbps |
单板适用的机型 | S9502/S9505/S9508/S9508V/S9512 |
单板适用的主机软件版本 | 1272及以上版本 |
可选用的XFP模块类型及其属性见下表。
表2 XFP模块属性
XFP模块名称 | 中心波长 | XFP模块提供的用户接口连接器类型 | 接口光纤规格 | 光纤最大传输距离 |
10GBase-SR/SW-XFP | 850nm | LC | 50/125µm多模光纤 | 对于62.5um MMF w/ 160MHz*km光纤，最大传输距离26M； 对于50um MMF w/ 500MHz*km光纤，最大传输距离82M； 对于50um MMF w/ 2000MHz*km光纤，最大传输距离300M； |
10GBase-LR/LW-XFP | 1310nm | 9/125µm单模光纤 | 10km | |
10GBase-ER/EW-XFP | 1550nm | 9/125µm单模光纤 | 40km |
3 注意事项
如主机软件版本不匹配，请联系该设备的销售商或集成商获取相应的主机软件版本；
单板安装说明及主机软件版本的升级方法请参见《H3C S9500系列路由交换机 安装手册》相关章节。
单板种类或规格可能随产品版本的变更而改变，请从公司网站http://www.h3c.com.cn主页上的“文档中心”获取最新资料。
杭州华三通信技术有限公司
2-Port 10GBASE-R/W XFP Optical Interface Card – LSB1XP2
LSB1XP2 Series Cards include LSB1XP2B0, LSB1XP2CA0, LSB1XP2CB0, LSB1XP2DB0 and LSB1XP2DC0. The silkscreens, XP2B, XP2CA, XP2CB, XP2DB and XP2DC, are printed at the upper right corner of the front panel to identify the cards.
2 Specifications
Table1 Card specifications
Item | Specification |
Connector | XFP/LC |
Port quantity | 2 |
Transmission rate | 10Gbps |
Applied to | S9502/S9505/S9508/S9508V/S9512 |
Host software version | Version 1272 and above |
For supported XFP modules, refer to the following table.
Table2 XFP Module Attribute
XFP module | Central wavelength | Connector | Matching cable | Transmission segment |
10GBase-SR/SW-XFP | 850 nm | LC | 50/125 µm multimode optical fiber cable | For 62.5um MMF w/ 160MHz*km optical fiber cable: 26M; For 50um MMF w/ 500MHz*km optical fiber cable: 82M; For 50um MMF w/ 2000MHz*km optical fiber cable: 300M; |
10GBase-LR/LW-XFP | 1310 nm | 9/125 µm single mode optical fiber cable | 10 km (6 mi) | |
10GBase-ER/EW-XFP | 1550 nm | 9/125 µm single mode optical fiber cable | 40 km (about 25 mi) |
3 Note
If the host software version does not match the one applicable to the card, contact the vendor or the integrator for the right version.
For the introduction of card installation and host software upgrade, see the related part in H3C S9500 Series Routing Switches Installation Manual.
As board types or specifications might change with product versions, you may need to obtain the latest documents from Technical Support & Document link on H3C website http://www.h3c.com.
Hangzhou H3C Technologies Co., Ltd.
