H3C S9500 LSB1FP20 Series Card Manual(V1.01)

                                                                                  20端口100BASE-FX SFP光接口板 – LSB1FP20

1  单板标识

LSB1FP20系列单板包括LSB1FP20B0和LSB1FP20CA0。前面板右上角分别标有丝印：FP20B和FP20CA，用来标识特定的单板。

2  单板简介

                                                                                                                                                                                  表1 单板属性

可选用的SFP模块类型及其属性见下表。

                                                                                                                                                                            表2 SFP模块属性

3  注意事项

如主机软件版本不匹配，请联系该设备的销售商或集成商获取相应的主机软件版本；

单板安装说明及主机软件版本的升级方法请参见《H3C S9500系列路由交换机  安装手册》相关章节。

单板种类或规格可能随产品版本的变更而改变，请从公司网站http://www.h3c.com.cn主页上的“文档中心”获取最新资料。

杭州华三通信技术有限公司

                                                     20-Port 100BASE-FX SFP Optical Interface Card – LSB1FP20

1  Card Identifier

LSB1FP20 Series Cards include LSB1FP20B0 and LSB1FP20CA0. The silkscreen, FP20B and FP20CA, are printed at the upper right corner of the front panel respectively to identify the cards.

2  Specifications

Table1  Card specifications

For supported SFP modules, refer to the following table.

Table2  SFP Module Attribute

3  Note

If the host software version does not match the one applicable to the card, contact the vendor or the integrator for the right version.

For the introduction of card installation and host software upgrade, see the related part in H3C S9500 Series Routing Switches Installation Manual.

As board types or specifications might change with product versions, you may need to obtain the latest documents from Technical Support & Document link on H3C website http://www.h3c.com .

Hangzhou H3C Technologies Co., Ltd