32端口10/100BASE-TX RJ45电接口及4端口1000BASE-X SFP光接口板 – LSB1F32G
1 单板标识
LSB1F32G系列单板包括LSB1F32GB0和LSB1F32GCA0。前面板右上角分别标有丝印：F32GB和F32GCA，用来标识特定的单板。
2 单板简介
属性 | 规格 |
接口连接器类型 | RJ45，SFP/LC |
接口数量 | 32个10M/100M以太网电接口，4个千兆SFP光接口 |
接口传输速率 | 电接口：10/100Mbps，半双工/全双工； 光接口：1000Mbps，全双工 |
单板适用的机型 | S9502/S9505/S9508/S9508V/S9512 |
单板适用的主机软件版本 | r1272及以上版本 |
可选用的SFP模块类型及其属性见下表。
表2 SFP模块属性
SFP模块名称 | 中心波长 | 接口连接器类型 | 接口光纤规格 | 光纤最大传输距离 |
1000BASE-SX-SFP | 850nm | LC | 50/125µm多模光纤 | 550m |
62.5/125µm多模光纤 | 275m | |||
1000BASE-LX-SFP | 1310nm | 9/125µm单模光纤 | 10km | |
1000BASE-LH-SFP | 40km | |||
1000BASE-ZX-LR-SFP | 1550nm | |||
1000BASE-ZX-VR-SFP | 70km | |||
1000BASE-ZX-UR-SFP | 100km |
3 注意事项
如主机软件版本不匹配，请联系该设备的销售商或集成商获取相应的主机软件版本；单板安装说明及主机软件版本的升级方法请参见《H3C S9500系列路由交换机 安装手册》相关章节。
单板种类或规格可能随产品版本的变更而改变，请从公司网站http://www.h3c.com.cn主页上的“文档中心”获取最新资料。
杭州华三通信技术有限公司
32 x 10/100BASE-TX Electrical Interface + 4 x 1000BASE-X SFP Optical Interface Card – LSB1F32G
1 Card Identifier
LSB1F32G Series Cards include LSB1F32GB0 and LSB1F32GCA0. The silkscreens, F32GB and F32GCA, are printed at the upper right corner of the front panel respectively to identify the cards.
2 Specifications
Table1 Card specifications
Item | Specification |
Connector | RJ45, SFP/LC |
Port quantity | 32-port 10/100Base-TX interface and 4-port 1000Base-X optical interface |
Transmission rate | 10/100Mbps, Half duplex /Full duplex； 1000Mbps, Full duplex |
Applied to | S9502/S9505/S9508/S9508V/S9512 |
Host software version | version 1272 and above |
For supported SFP modules, refer to the following table.
Table2 SFP Module Attribute
Optional SFP module | Central wavelength | Connector type | Fiber specifications | Maximum transmission distance |
1000BASE-SX-SFP | 850nm | LC | 50/125µm multi-mode optical fiber | 550m |
62.5/125µm multi-mode optical fiber | 275m | |||
1000BASE-LX-SFP | 1310nm | 9/125µm single-mode optical fiber | 10km | |
1000BASE-LH-SFP | 40km | |||
1000BASE-ZX-LR-SFP | 1550nm | |||
1000BASE-ZX-VR-SFP | 70km | |||
1000BASE-ZX-UR-SFP | 100km |
3 Note
If the host software version does not match the one applicable to the card, contact the vendor or the integrator for the right version.
For the introduction of card installation and host software upgrade, see the related part in H3C S9500 Series Routing Switches Installation Manual.
As board types or specifications might change with product versions, you may need to obtain the latest documents from Technical Support & Document link on H3C website http://www.h3c.com .
Hangzhou H3C Technologies Co., Ltd
