Since IS-IS, IPv6 IS-IS, and multicast protocols cannot run on tunnels, the commands related to these protocols in tunnel interface view are not supported.
A.1.1 display isis traffic-eng sub-tlvs
Syntax
display isis traffic-eng sub-tlvs [ process-id | vpn-instance vpn-instance-name ]
View
Any view
Syntax
display mac-address vsi [ vsi-name ] [ blackhole | static ] [ count ]
View
Any view
Syntax
fast-leave [ group-policy acl6-number ]
undo fast-leave
View
MLD view
Syntax
holdtime assert interval
undo holdtime assert
View
PIM view, IPv6 PIM view
Syntax
mld fast-leave [ group-policy acl6-number ]
undo mld fast-leave
View
POS interface view
Syntax
mld group-policy acl6-number [ version-number ]
undo mld group-policy
View
POS interface view
Syntax
mld static-group ipv6-group-address [ source ipv6-source-address ]
undo mld static-group { all | ipv6-group-address [ source ipv6-source-address ] }
View
POS interface view
Syntax
mpls te auto-bandwidth { adjustment | collect-bw } [ frequency seconds ] [ max-bw max-bandwidth | min-bw min-bandwidth ] *
undo mpls te auto-bandwidth
View
Tunnel interface view
Syntax
mpls te timer auto-bandwidth [ seconds ]
undo mpls te timer auto-bandwidth
View
MPLS view
Syntax
multicast ipv6 longest-match
undo multicast ipv6 longest-match
View
System view
Syntax
peer ip-address advertise-community
undo peer ip-address advertise-community
View
IPv6 address family view
Syntax
peer ip-address advertise-ext-community
undo peer ip-address advertise-ext-community
View
IPv6 address family view
Syntax
peer ip-address allow-as-loop [ number ]
undo peer ip-address allow-as-loop
View
IPv6 address family view
Syntax
peer ip-address as-path-acl ipv6-as-path-acl-number { import | export }
undo peer ip-address as-path-acl ipv6-as-path-acl-number { import | export }
View
IPv6 address family view
Syntax
peer ip-address default-route-advertise [ route-policy route-policy-name ]
undo peer ip-address default-route-advertise
View
IPv6 address family view
Syntax
peer ip-address enable
undo peer ip-address enable
View
IPv6 address family view
Syntax
peer ip-address filter-policy acl6-number { import | export }
undo peer ip-address filter-policy [ acl6-number ] { import | export }
View
IPv6 address family view
Syntax
peer ip-address group ipv6-group-name
undo peer ip-address group ipv6-group-name
View
IPv6 address family view
Syntax
peer ip-address ipv6-prefix ipv6-prefix-name { import | export }
undo peer ip-address ipv6-prefix { import | export }
View
IPv6 address family view
Syntax
peer ip-address keep-all-routes
undo peer ip-address keep-all-routes
View
IPv6 address family view
Syntax
peer ip-address label-route-capability
undo peer ip-address label-route-capability
View
IPv6 address family view
Syntax
peer ip-address reflect-client
undo peer ip-address reflect-client
View
IPv6 address family view
Syntax
peer ip-address route-limit limit [ percentage ]
undo peer ip-address route-limit
View
IPv6 address family view
Syntax
peer ip-address route-policy route-policy-name { import | export }
undo peer ip-address route-policy route-policy-name { import | export }
View
IPv6 address family view
Syntax
pim holdtime assert interval
undo pim holdtime assert
View
VLAN interface view, POS interface view
Syntax
pim ipv6 holdtime assert interval
undo pim ipv6 holdtime assert
View
VLAN interface view
Syntax
qos { 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | { user-define-table p p p p p p p p } }
View
VSI view
Syntax
reset mpls te auto-bandwidth adjustment timers
View
User view
Syntax
te-set-subtlv { bw-constraint value | lo-multiplier value | unreserved-bw-sub-pool value } *
undo te-set-subtlv { bw-constraint | lo-multiplier | unreserved-bw-sub-pool } *
View
IS-IS view
A.1.30 voice-config
Syntax
voice-config { ncp-ip ip-address | as-ip ip-address | voice-vlan vlan-id { disable | enable } | fail-over ip-address dialer-string }
undo voice-config [ ncp-ip | as-ip | voice-vlan | fail-over ]
View
DHCP address pool view
