|
|
|
|
|
|
|
|
|
H3C N68 Cabinet
|
|
Installation and Remodel
Introduction
|
|
|
|
|
|
|
|
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Manual Version:
T2-08050P-20080619-C-1.05
|
Copyright
© 2006-2008, Hangzhou H3C Technologies Co., Ltd. and its licensors
All Rights Reserved
No part of this manual may be reproduced
or transmitted in any form or by any means without prior written consent of Hangzhou
H3C Technologies Co., Ltd.
Trademarks
H3C, 
, Aolynk, 
, H3Care, 
, TOP G, 
, IRF, NetPilot, Neocean, NeoVTL, SecPro,
SecPoint, SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V2G,
VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks
of Hangzhou H3C Technologies Co., Ltd.
All other trademarks that may be mentioned
in this manual are the property of their respective owners.
Notice
The information in this document is
subject to change without notice. Every effort has been made in the preparation
of this document to ensure accuracy of the contents, but all statements,
information, and recommendations in this document do not constitute the
warranty of any kind, express or implied.
Technical
Support
customer_service@h3c.com
http://www.h3c.com
About
This Manual
Organization
H3C N68 Cabinet Installation and Remodel Introduction is organized as follows:
|
Chapter
|
Contents
|
|
1 Installing N68 Cabinets
|
Gives requirements for space planning and installation.
|
|
2 Installing Cabinet on
Cement Floor
|
Introduces how to install the cabinet on cement floor.
|
|
3 Installing Cabinets on the Antistatic Floor
|
Introduces how to install the cabinet on antistatic floor.
|
|
4 Installing Accessories
|
Introduces how to install the cabinet accessories.
|
|
5 Introduction to Cabinet Cable Management
|
Introduces cabinet grounding point, cabinet power distribution,
and internal cable management for the cabinet.
|
|
6 Remodeling
Cabinets
|
Introduces how to remodel the cabinets.
|
Conventions
The manual
uses the following conventions:
I. Symbols
|
Convention
|
Description
|
|
 Warning
|
Means reader be
extremely careful. Improper operation may cause bodily injury.
|
|
 Caution
|
Means reader be careful. Improper operation
may cause data loss or damage to equipment.
|
|
& Note
|
Means a complementary description.
|
Obtaining
Documentation
You can
access the most up-to-date H3C product documentation on the World Wide Web at this URL: http://www.h3c.com.
The
following are the columns from which you can obtain different categories of
product documentation:
[Products
& Solutions]: Provides information about products and technologies, as well
as solutions.
[Technical
Support & Document > Technical Documents]: Provides several categories
of product documentation, such as installation, operation, and maintenance.
[Technical
Support & Document > Product Support > Software]: Provides the
documentation released with the software version.
Documentation
Feedback
You can e-mail your comments about product
documentation to info@h3c.com.
We appreciate your comments.
Environmental Protection
This product has been designed to comply with
the requirements on environmental protection. For the proper storage, use and
disposal of this product, national laws and regulations must be observed.
