00-1Cover

H3C S7500 Series Ethernet Switches

Command Manual

Hangzhou H3C Technology Co., Ltd.

http://www.h3c.com

Manual Version: T2-08193F-20061231-C-1.02

Product Version: Release 3100 Series

H3C S7500 Series Ethernet Switches  Installation Manual

It provides information for the system installation.

H3C S7500 Series Ethernet Switches  Operation Manual

It is used for assisting the users in data configurations and typical applications.

1 CLI

Introduces the commands used for switching between the command levels and command level setting.

2 Login

Introduces the commands used for logging into the Ethernet switch.

3 Configuration File Management

Introduces the commands used for configuration file management.

4 VLAN

Introduces the commands used for configuring VLAN.

5 Extended VLAN Application

Introduces the commands used for voice VLAN, isolate-user-VLAN, and super VLAN.

6 IP Address-IP Performance-IPX

Introduces the commands used for IP address configuration, IP performance configuration, and IPX.

7 GVRP

Introduces the commands used for GVRP configuration.

8 QinQ

Introduces the commands used for QinQ and selective QinQ.

9 Port Basic Configuration

Introduces the commands used for basic port configuration.

10 Link Aggregation

Introduces the commands used for link aggregation.

11 Port Isolation

Introduces the commands used for port isolation.

12 Port Binding

Introduces the commands used for port binding.

13 DLDP

Introduces the commands used for DLDP configuration.

14 MAC Address Table

Introduces the commands used for MAC address forwarding table management.

15 MSTP

Introduces the STP-related commands and BPDU tunnel-related commands.

16 Routing Protocol

Introduces the commands used for routing protocol configuration.

17 Multicast

Introduces the commands used for multicast configuration.

18 802.1x

Introduces the commands used for 802.1x and HABP configuration.

19 AAA-RADIUS-HWTACACS-EAD

Introduces the commands used for AAA, RADIUS, HWTACACS, and EAD configuration.

20 Traffic Accounting

Introduces the commands used for traffic accounting.

21 VRRP-HA

Introduces the commands used for VRRP and HA configuration.

22 ARP

Introduces the ARP-related commands.

23 DHCP

Introduces the DHCP-related commands.

24 ACL

Introduces the ACL-related commands.

25 QoS

Introduces the commands used for QoS configuration.

26 Mirroring

Introduces the commands used for port mirroring.

27 Cluster

Introduces the commands used for cluster management.

28 PoE

Introduces the commands used for PoE configuration.

29 UDP-Helper

Introduces the commands used for UDP Helper configuration.

30 SNMP-RMON

Introduces the commands used for SNMP and RMON configuration.

31 NTP

Introduces the NTP-related commands.

32 SSH Terminal Service

Introduces the commands used for SSH and SFTP configuration.

33 File System Management

Introduces the commands used for file system management.

34 FTP and TFTP

Introduces the FTP-/TFTP-related commands.

35 Information Center

Introduces the commands used for information center configuration.

36 DNS

Introduces the DNS-related commands.

37 System Maintenance and Debugging

Introduces the commands used for system maintenance and debugging.

38 HWPing

Introduces the commands used for HWPing configuration.

39 RRPP

Introduces the RRPP-related commands.

40 NAT-Netstream-Policy Routing

Introduces the commands used for NAT, Netstream, and policy-based routing.

41 Telnet Protection

Introduces the commands used for Telnet securing.

42 Hardware-dependent Software

Introduces the commands concerning hardware-dependent software.

43 Appendix

Lists all the commands described in this manual in an alphabetic order. The parts and pages where the commands are described are also given.

Boldface

The keywords of a command line are in Boldface.

italic

Command arguments are in italic.

[ ]

Items (keywords or arguments) in square brackets [ ] are optional.

{ x | y | ... }

Alternative items are grouped in braces and separated by vertical bars. One is selected.

[ x | y | ... ]

Optional alternative items are grouped in square brackets and separated by vertical bars. One or none is selected.

{ x | y | ... } *

Alternative items are grouped in braces and separated by vertical bars. A minimum of one or a maximum of all can be selected.

[ x | y | ... ] *

Optional alternative items are grouped in square brackets and separated by vertical bars. Many or none can be selected.

#

A line starting with the # sign is comments.

  Warning

Means reader be extremely careful. Improper operation may cause bodily injury.

  Caution

Means reader be careful. Improper operation may cause data loss or damage to equipment.

&  Note

Means a complementary description.