48端口10/100/1000Base-T千兆以太网业务板- LSQ1GV48SA0

BOM: 3123A09T

 

单板标识

前面板右上角标有丝印LSQ1GV48SA0,用来标识该单板。

单板简介

表-1 LSQ1GV48SA0属性

属性

LSQ1GV48SA0

接口连接器类型

RJ-45

接口数量

4810/100/1000Base-T千兆以太网端口

接口传输速率

10M/100M/1000M/全双工

10/100/1000Base-T千兆以太网端口可选用线缆及最大传输距离

5类双绞线,传输距离100m

单板适用的主机类型

S7502E/S7503E/S7506E/S7510E/S7506E-V以太网交换机

单板适用的主机软件版本

Release 6000系列

 

注意事项

如主机软件版本不匹配,可以联系该设备的销售商或集成商获取相应的主机软件版本。

单板安装说明及主机软件版本的升级方法请参见《H3C S7500E系列以太网交换机  安装手册》相关章节。

 

 

Copyright © 2007  杭州华三通信技术有限公司

 


48-port 10/100/1000Base-T Gigabit Ethernet Card–LSQ1GV48SA0

BOM: 3123A09T

 

Card Identifier

The silkscreen LSQ1GV48SA0 is printed at the upper right corner of the front panel, and is used to identify the card.

Specifications

Table1  LSQ1GV48SA0 specifications

Item

LSQ1GV48SA0

Connector

RJ-45

Port quantity

Forty-eight 10/100/1000Base-T Gigabit Ethernet ports

Interface transmission speed

10/100/1000 Mbps (half/full duplex)

Cable and maximum transmission distance

Category-5 twisted pair; maximum transmission distance: 100 m (328 ft)

Applied to

S7502E/S7503E/S7506E/S7510E/S7506E-V Ethernet switches

Host software version

Release 6000 series

 

Note

If the host software version does not match the one applicable to the card, contact the vendor or the integrator for the right version.

For the introduction of card installation and host software upgrade, see the related part in H3C S7500E Series Ethernet Switches  Installation Manual.

 

 

Copyright © 2007 Hangzhou H3C Technologies Co., Ltd.

download
>

Related Documentation