|
|
|
|
|
|
|
|
|
H3C S5600 Series Ethernet Switches
|
|
Installation Manual
|
|
|
|
|
|
|
|
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Manual Version: T2-08045W-20071218-C-1.04
|
Copyright
© 2006-2007, Hangzhou H3C Technologies Co., Ltd. and its licensors
All Rights Reserved
No part of this manual may be reproduced
or transmitted in any form or by any means without prior written consent of Hangzhou
H3C Technologies Co., Ltd.
Trademarks
H3C, 
, Aolynk, 
, H3Care, 
, TOP G, 
, IRF, NetPilot, Neocean, NeoVTL, SecPro, SecPoint,
SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V2G, VnG,
PSPT, XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou H3C
Technologies Co., Ltd.
All other trademarks that may be mentioned
in this manual are the property of their respective owners.
Notice
The information in this document is
subject to change without notice. Every effort has been made in the preparation
of this document to ensure accuracy of the contents, but all statements,
information, and recommendations in this document do not constitute the
warranty of any kind, express or implied.
To obtain the latest information, please
access:
http://www. h3c.com
Technical
Support
customer_service@h3c.com
http://www. h3c.com
About
This Manual
Related
Documentation
In addition
to this manual, each H3C S5600 Series Ethernet Switches documentation
set includes the following:
|
Manual
|
Description
|
|
H3C S5600 Series
Ethernet Switches Operation
Manual
|
It is used for assisting the users in data configurations and typical
applications.
|
|
H3C S5600 Series
Ethernet Switches Command
Manual
|
It is used for assisting the users in
using various commands.
|
Organization
H3C S5600 Series Ethernet Switches Installation
Manual is organized as follows:
|
Chapter
|
Contents
|
|
1 Product Overview
|
Introduces the characteristics and technical specifications of S5600 Series Ethernet Switches.
|
|
2 Preparing for Installation
|
Introduces the installation preparation and precaution of S5600 Series Ethernet Switches.
|
|
3 Installing the Switch
|
Introduces the procedures
to install an S5600 Series Ethernet Switch, including the setup of the mainframe, cards and cables.
|
|
4 Starting up the Switch at the Initial Boot
|
Introduces the booting process of an S5600 Series Ethernet
Switch, including the power-on
booting of the switch and the system initialization.
|
|
5 Loading Boot ROM and Host Software
|
Introduces how to load BootROM and host
software for an S5600 Series Ethernet Switch.
|
|
6 Maintenance and Troubleshooting
|
Introduces the problems that might occur
during the installation and the booting of an S5600 Series Ethernet Switch and the related solution.
|
|
7 Appendix A Lightning Protection of the Switch
|
Introduces
lightning protection of S5600
Series Ethernet Switches.
|
Conventions
The manual
uses the following conventions:
I. GUI conventions
|
Convention
|
Description
|
|
< >
|
Button names are inside angle brackets. For example, click
<OK>.
|
|
[ ]
|
Window names, menu items, data table and field
names are inside square brackets. For example, pop up the [New User] window.
|
|
/
|
Multi-level menus are separated by forward
slashes. For example, [File/Create/Folder].
|
II. Symbols
|
Convention
|
Description
|
|
 Warning
|
Means reader be
extremely careful. Improper operation may cause bodily injury.
|
|
 Caution
|
Means reader be careful. Improper operation may
cause data loss or damage to equipment.
|
|
& Note
|
Means a
complementary description.
|
Environmental Protection
This product has been designed to comply
with the requirements on environmental protection. For the proper storage, use
and disposal of this product, national laws and regulations must be observed.
