00-1Cover

H3C S5500-EI Series Ethernet Switches

Operation Manual

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Manual Version: 20071120-C-1.01

Product Version: Release 2102

H3C S5500-EI Series Ethernet Switches  Installation Manual

It provides information for the system installation.

H3C S5500-EI Series Ethernet Switches  Command Manual

It is used for assisting the users in using various commands.

0 Overview

Introduces the ways for you to obtain documentation, product overview, and network application of the switches.

1 Login

Introduces the ways to log into an Ethernet switch.

2 VLAN

Introduces VLAN, Voice VLAN, GVRP fundamental and the related configuration.

3 IP Addressing and IP Performance

Introduces IP address and IP performance fundamental and the related configuration.

4 QinQ-BPDU Tunneling

Introduces QinQ, BPDU Tunneling and the related configuration.

5 Port Correlation Configuration

Introduces basic port configuration and port isolation configuration.

6 Link Aggregation

Introduces link aggregation fundamental and the related configuration.

7 MAC Address Table Management

Introduces MAC address forwarding table and the related configuration.

8 IP Source Guard

Introduces MAC address, IP address and port binding configuration.

9 DLDP

Introduces DLDP and the related configurations.

10 MSTP

Introduces STP, BRDU tunnel and the related configurations.

11 IP Routing-GR Overview

Introduces the basic routing information, the classification of routing protocols, and GR fundamental.

12 IPv4 Routing

Introduces IPv4 routing related configurations, such as static routing, RIP, OSPF, IS-IS, BGP, and route policy.

13 IPv6 Routing

Introduces IPv6 routing related configurations, such as static routing, RIPng, OSPFv3, IS-ISv6, and BGP4+.

14 IPv6 Configuration

Introduces IPv6 basic configuration and application, IPv6 tunneling, and so on.

15 Multicast Configuration

Introduces the multicast protocol-related configurations.

16 802.1x-HABP-MAC Authentication

Introduces 802.1x, HABP, MAC and related configurations.

17 AAA RADIUS HWTACACS

Introduces AAA, RADIUS, HWTACACS, and the related configurations.

18 ARP

Introduces ARP and the related configuration.

19 DHCP

Introduces DHCP and the related configuration.

20 ACL

Introduces IPv4&IPv6-based ACL and the related configuration.

21 QoS

Introduces QoS and the related configuration.

22 Port Mirroring

Introduces port mirroring and the related configuration.

23 Cluster Management

Introduces Cluster and the related configurations.

24 UDP Helper

Introduces UDP Helper and the related configuration.

25 SNMP-RMON

Introduces the configuration to manage network devices through SNMP and RMON.

26 NTP

Introduces NTP and the related configuration.

27 DNS

Introduces DNS and the related configuration.

28 File System Management

Introduces basic configuration for file system management.

29 Information Center

Introduces the configuration to analyze and diagnose networks using the information center.

30 System Maintaining and Debugging

Introduces daily system maintenance and debugging.

31 NQA

Introduces NQA and the related configurations.

32 VRRP

Introduces VRRP and the related configurations.

33 SSH

Introduces SSH and the related configurations.

34 RRPP

Introduces RRPR and the related configurations.

35 Port Security

Introduces Port Security and the related configurations.

36 LLDP

Introduces LLDP and the related configurations.

37 PoE

Introduces PoE and the related configuration.

38 sFlow

Introduces sFlow and the related configurations.

39 SSL-HTTPS

Introduces SSL, HTTPS and the related configurations.

40 PKI

Introduces PKI and the related configurations.

41 Track

Introduces Track and the related configurations.

42 Appendix

Lists the acronyms used in this manual.

Boldface

The keywords of a command line are in Boldface.

italic

Command arguments are in italic.

[ ]

Items (keywords or arguments) in square brackets [ ] are optional.

{ x | y | ... }

Alternative items are grouped in braces and separated by vertical bars. One is selected.

[ x | y | ... ]

Optional alternative items are grouped in square brackets and separated by vertical bars. One or none is selected.

{ x | y | ... } *

Alternative items are grouped in braces and separated by vertical bars. A minimum of one or a maximum of all can be selected.

[ x | y | ... ] *

Optional alternative items are grouped in square brackets and separated by vertical bars. Many or none can be selected.

&<1-n>

The argument(s) before the ampersand (&) sign can be entered 1 to n times.

#

A line starting with the # sign is comments.

< >

Button names are inside angle brackets. For example, click <OK>.

[ ]

Window names, menu items, data table and field names are inside square brackets. For example, pop up the [New User] window.

/

Multi-level menus are separated by forward slashes. For example, [File/Create/Folder].

  Warning

Means reader be extremely careful. Improper operation may cause bodily injury.

  Caution

Means reader be careful. Improper operation may cause data loss or damage to equipment.

&  Note

Means a complementary description.