|
|
|
|
|
|
|
|
|
H3C S5100 Series Ethernet Switches
|
|
Quick Start (For Soliton)
|
|
|
|
|
|
Hangzhou
H3C Technologies Co., Ltd.
http://www.h3c.com
Manual
Version: T2-08019G-20070726-C-1.00
|
Copyright © 2007, Hangzhou H3C
Technologies Co., Ltd. and its licensors
All Rights Reserved
No part of this manual
may be reproduced or transmitted in any form or by any means without prior
written consent of Hangzhou H3C Technologies Co., Ltd.
Trademarks
H3C, 
, Aolynk, 
, H3Care, 
, TOP G, 
, IRF, NetPilot, Neocean, NeoVTL, SecPro,
SecPoint, SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V2G,
VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks
of Hangzhou H3C Technologies Co., Ltd.
All other
trademarks that may be mentioned in this manual are the property of their
respective owners.
Notice
The information in
this document is subject to change without notice. Every effort has been made
in the preparation of this document to ensure accuracy of the contents, but all
statements, information, and recommendations in this document do not constitute
the warranty of any kind, express or implied.
To obtain the
latest information, please access:
http://www.h3c.com
Technical Support
customer_service@h3c.com
http://www.h3c.com
About This
Manual
Related
Documentation
In addition
to this manual, each H3C S5100 Series Ethernet Switches documentation set
includes the following:
|
Manual
|
Content
|
|
H3C S5100 Series Ethernet Switches Operation Manual
|
It is used for assisting the users in
data configurations and typical applications
|
|
H3C S5100 Series Ethernet Switches Command Manual
|
It is used for assisting the users in using
various commands.
|
|
H3C S5100 Series Ethernet Switches Installation
Manual (For Soliton)
|
It is used for assisting the users in
switch installation, booting up, hardware and software maintenance.
|
Organization
H3C S5100 Series Ethernet Switches Quick
Start (For Soliton) is organized as follows:
|
Chapter
|
Contents
|
|
1 Product Overview
|
Introduces the
characteristics and technical specifications of S5100 Series
Ethernet Switches.
|
|
2 Preparing for Installation
|
Introduces
the installation preparation and precaution of S5100 Series Ethernet Switches.
|
|
3 Installing the Switch
|
Introduces the procedures to install an S5100 Series Ethernet Switch,
including the setup of the mainframe,
cards and cables.
|
| 4 Lightning Protection of the Switch |
Introduces
lightning protection of S5100 Series Ethernet Switches.
|
Conventions
The manual uses the following conventions:
I. GUI
conventions
|
Convention
|
Description
|
|
< >
|
Button names are inside angle brackets. For example, click
<OK>.
|
|
[ ]
|
Window names,
menu items, data table and field names are inside square brackets. For
example, pop up the [New User] window.
|
|
/
|
Multi-level menus are separated by forward
slashes. For example, [File/Create/Folder].
|
II. Symbols
|
Convention
|
Description
|
|
 Warning
|
Means reader
be extremely careful. Improper
operation may cause bodily injury.
|
|
 Caution
|
Means reader be
careful. Improper operation may cause data loss or damage to equipment.
|
|
& Note
|
Means a complementary description.
|
Environmental Protection
This product has been designed to comply
with the requirements on environmental protection. For the proper storage, use
and disposal of this product, national laws and regulations must be observed.
