Chapter 1 File System Management Configuration Commands
For Ethernet switches that support intelligent resilient framework (IRF),
you can specify a file path and file name in one of the following ways:
l
In universal resource locator (URL) format and
starting with “unit[No.]>flash:/” ( [No.] represents the unit ID
of the switch). This method is used to specify a file on a specified unit. For
example, if the unit ID of the switch is 1, the URL of a file named text.txt
and residing in the root directory must be
“unit1>flash:/text.txt”.
l
In URL format and starting with
“flash:/”. This method can be used to specify a file in the Flash memory
of the current unit.
l
Using the path name or file name directly. This
method can be used to specify a path or a file in the current directory.
Syntax
boot attribute-switch
{ all | app | configuration | web } fabric
View
User view
Parameter
all: Specifies
all the files, including app files, configuration files and Web files.
app: Specifies
app files.
configuration: Specifies configuration files.
web: Specifies
Web files.
fabric: Specifies
to apply the configuration to the whole fabric.
Description
Use the boot attribute-switch
command to switch between the main and backup attribute for all the files or a
specified type of files. That is, change a file with the main attribute to one
with the backup attribute, or vice versa.
Example
# Switch the attributes of all the files in
the fabric.
<H3C> boot attribute-switch all
fabric
The boot, web and configuration
file's backup-attribute and main-attribute will exchange.
Are you sure? [Y/N]
y
The boot, web and configuration
file's backup-attribute and main-attribute successfully exchanged on unit 1!
The boot, web and configuration
file's backup-attribute and main-attribute successfully exchanged on unit 2!
Syntax
boot boot-loader
file-url [ fabric ]
View
User view
Parameter
file-url:
Path or the name of the app file in the Flash memory, a string comprising 1 to
64 characters.
fabric:
Specifies to apply the configuration to the whole fabric.
Description
Use the boot
boot-loader command to configure an app file of the fabric or of a device
in the fabric to be with the main attribute. The app file specified by this
command becomes the main startup file when the device starts up next time.
If you
execute the boot boot-loader command without the fabric keyword, the
configuration applies to the local unit only.
Caution:
Before configuring the main or backup attribute for a file in the
fabric, make sure the file already exists on all devices in the fabric. This is
because Ethernet switches do not allows you to specify an app file in other
unit’s Flash memory as the app startup file of the local unit.
Example
# Configure the file named boot.bin to be the
main startup file of the fabric.
<H3C> boot boot-loader boot.bin
fabric
The specified file will be booted
next time on unit 1!
The specified file will be booted
next time on unit 2!
Syntax
boot boot-loader
backup-attribute file-url [ fabric ]
View
User view
Parameter
file-url:
Path or the name of the app file in the Flash memory, a string comprising 1 to
64 characters.
fabric:
Specifies to apply the configuration to the whole fabric.
Description
Use the boot boot-loader backup-attribute
command to configure an app file of the fabric or of a device in the fabric to
be with the backup attribute. The app file specified by this command becomes
the backup startup file when the device starts up next time. When the main startup
file is unavailable, the backup startup file is used to start the switch.
If you execute the boot boot-loader
backup-attribute command without the fabric keyword, the
configuration applies to the local unit only.
Caution:
Before configuring the main or backup attribute for a file in the
fabric, make sure the file already exists on all devices in the fabric. This is
because Ethernet switches do not allows you to specify an app file in other
unit’s Flash memory as the app startup file of the local unit.
Example
# Configure the file named backup.bin to be
the backup startup file of the fabric.
<H3C> boot boot-loader
backup-attribute backup.bin fabric
Set boot file backup-attribute
successfully on unit 1!
Set boot file backup-attribute
successfully on unit 2!
Syntax
boot web-package
webfile { backup | main }
View
User view
Parameter
webfile:
Name of a Web file, a string comprising 5 to 127 characters.
main:
Specifies the file to be with the main attribute.
backup: Specifies
the file to be with the backup attribute.
Description
Use the boot web-package command to
configure a Web file in the fabric to be with the main or backup attribute.
Caution:
l
Before configuring the main or backup attribute
for a Web file in the fabric, make sure the file exists on all devices in the
fabric.
l
The configuration of the main or backup attribute
for a Web file takes effect immediately without restarting the device.
l
After you upgrade a Web file, you need to
specify the new Web file in the Boot menu after restarting the switch.
Otherwise, the Web server cannot function normally.
Example
# Configure the Web file named boot.web to
be with the main attribute.
<H3C> boot web-package boot.web
main
Syntax
display boot-loader
[ unit unit-id ]
View
Any view
Parameter
unit unit-id:
Specifies the unit ID of a switch.
Description
Use the display boot-loader
command to display the information about the app startup files of the fabric or
of a specific device in the fabric. Displayed information includes the current app
startup file name, and the main and backup app startup files to be used when
the switch starts up next time.
If you execute the display boot-loader
command without unit unit-id, the information of all app startup
files of the fabric will be displayed.
Example
# Display the information about the app
startup files of unit 1.
<H3C> display boot-loader unit
1
Unit 1
The current boot app is: s3600.bin
The main boot app is: s3600.bin
The backup boot app is: s3600bak.bin
1.1.6 startup bootrom-access enable
Syntax
startup bootrom-access enable
undo startup bootrom-access enable
View
User view
Parameter
None
Description
Use the startup bootrom-access enable command
to specify a switch to prompt users to use customized password to enter the
BOOT menu.
Use the undo startup bootrom-access
enable command to disable the above function.
By default, users have to use customized
passwords to enter the BOOT menu.
You can use the display startup command
to view the execution results of these two commands.
Example
# Specify to prompt users to use customized
passwords to enter the BOOT menu.
<H3C> startup bootrom-access
enable
1.2 File System Configuration Commands
Note to limit the
lengths of device name, directory name, file path and file name within the
following ranges regulated for the switch.
l
A directory name should be no more than 91
characters.
l
A file name plus its local path name should be
no more than 127 characters.
l
A device name should be no more than 14
characters.
l
A file name plus its complete path name should
be no more than 142 characters.
Syntax
cd directory
View
User view
Parameter
directory:
Target directory.
Description
Use the cd command to enter a specified
directory on the Ethernet switch.
The default directory is the root directory
of Flash memory.
Example
# Enter the directory named test.
<H3C> cd test
<H3C> pwd
unit1>flash:/test
Syntax
copy fileurl-source
fileurl-dest
View
User view
Parameter
fileurl-source:
Path name or file name of the source file in the Flash memory.
fileurl-dest:
Path name or file name of the target file in the Flash memory.
Description
Use the copy command to copy a file.
If the fileurl-dest argument
identifies an existing file, the system prompts you for the confirmation to
overwrite the existing file.
Example
# Copy the file from flash:/config.cfg into
flash:/test/1.cfg.
<H3C> copy flash:/config.cfg
flash:/test/1.cfg
Copy unit1>flash:/config.cfg to
unit1>flash:/test/1.cfg?[Y/N]:y
...
%Copy file unit1>flash:/config.cfg
to unit1>flash:/test/1.cfg...Done.
Syntax
delete [ /unreserved
] file-url
delete { running-files
| standby-files } [ /fabric ] [ /unreserved ]
View
User view
Parameter
/unreserved: Specifies to delete a
file completely.
file-url:
Path name or file name of a file in the Flash memory. You can use the *
character in this argument as a wildcard. For example, the delete *.txt
command deletes all the files with txt as their extensions.
running-files: Specifies to delete all the files with the main attribute.
standby-files: Specifies to delete all the files with the backup attribute.
/fabric: Specifies
to delete all the specified files in the fabric.
Description
Use the delete command to delete a
specified file from the Flash memory on a switch.
You can use the * character in the argument
as a wildcard.
If you execute the delete command
with the /unreserved keyword specified, the specified file is permanently
deleted. That is, the file cannot be restored.
You can delete files based on file
attribute. If you execute the delete running-files command, all the
files with the main attribute will be deleted. If you execute the delete
standby-files command, all the files with the backup attribute will be
deleted.
For a file that has both the main and
backup attributes, the delete running-files deletes its main attribute
only instead of deleting the file itself, and the delete standby-files command
deletes its backup attribute only instead of deleting the file itself.
Following are the notes concerning with the
deleted files:
l
The deleted files are moved to the recycle bin.
l
The dir command cannot display the
information about deleted files.
l
To display the information about deleted files, use
the dir /all command.
l
To restore a deleted file, use the undelete
command.
l
To restore the deleted files from the recycle
bin, use the undelete command; to delete the files permanently from the
recycle bin, use the reset recycle-bin command.
When you use the delete running-file or
delete standby-file command, you will be prompted to confirm whether to
delete all files with the main/backup attribute. If you choose yes, the
corresponding files are deleted. If you choose no, the system will further to
prompt you to confirm the following items orderly:
1)
Delete the image files with the main/backup attribute?
2)
Delete the configuration files with the
main/backup attribute?
3)
Delete the Web files with the main/backup attribute?
The corresponding messages are displayed as
follows:
Delete the running image file?
[Y/N]:n
Delete the running config file?
[Y/N]:n
Delete the running web file? [Y/N]:n
Delete the backup image file? [Y/N]:n
Delete the backup config file?
[Y/N]:n
Delete the backup web file? [Y/N]:n
The corresponding files will be deleted
after you choose yes.
Caution:
For deleted files
whose names are the same, only the latest deleted file is stored in the recycle
bin and can be restored.
Example
# Delete the file test/test.txt on the
local unit.
<H3C> delete test/test.txt
Delete
unit1>flash:/test/test.txt?[Y/N]:y
.
%Delete file
unit1>flash:/test/test.txt...Done.
# Delete the files with the main attribute
in the fabric.
<H3C> delete running-files /fabric
Delete the running files ? [Y/N]:y
Start deleting ..........
Unit1 delete success!
Unit2 delete success!
%Apr 4 11:25:40:973 2000 H3C
VFS/6/OPLOG:- 1 - Unit1 delete success!
%Apr 4 11:25:41:56 2000 H3C
VFS/6/OPLOG:- 1 – Unit2 delete success!
Deleting ... done
Syntax
dir [ /all
] [ /fabric | file-url ]
View
User view
Parameter
/all: Specifies to display the information
about all the files, including those in the recycle bin.
/fabric: Specifies to display the
information about all the specified files in the fabric.
file-ur:
Path name or the name of a file in the Flash memory. You can use the *
character as a wildcard. For example, the dir *.txt command displays the
information about all the files with the extension of txt in the current
directory.
Description
Use the dir command to display the
information about the specified files or directories in the Flash memory on a switch.
You can use the * character as a wildcard.
In the output information, files with the
main, backup or main/backup attribute are tagged.
In the output information
of the dir /all command, deleted files (that is, those in the recycle bin)
are embraced in brackets.
Example
# Display the information about all the ordinary
files in the root directory of the file system on the local unit.
<H3C> dir
Directory of unit1>flash:/
1 (*)
-rw- 5792495 Apr 02 2000 00:06:50 s3600.bin
2 (*) -rw- 1965 Apr 01
2000 23:59:13 3comoscfg.cfg
3 -rw-
5841301 Apr 02 2000 21:42:13 s3600d8.bin
4 -rw- 224 Apr 02
2000 01:36:30 s3800.bin
5 -rw- 279296 Apr 02
2000 00:22:01 test.abc
15367 KB total (3720 KB free)
(*) -with main attribute (b) -with
backup attribute
(*b) -with both main and backup
attribute
# Display the information about all the files
(including the files in the recycle bin) in the root directory of the file
system of the fabric.
<H3C> dir /all /fabric
Directory of unit1>flash:/
1 (*) -rw- 5792495 Apr 02
2000 00:06:50 s3600.bin
2 -rwh 4 Apr 01
2000 23:55:26 snmpboots
3 -rwh 151 Apr 02
2000 00:05:53 private-data.txt
4 (*) -rw- 1965 Apr 01
2000 23:59:13 3comoscfg.cfg
5 -rw- 5841301 Apr 02
2000 21:42:13 s3600d8.bin
6 -rw- 224 Apr 02
2000 01:36:30 s3800.bin
7 -rw- 279296 Apr 02
2000 00:22:01 test.abc
8 -rw- 2370 Apr 02
2000 02:49:12 [1.cfg]
15367 KB total (3720 KB free)
Directory of unit2>flash:/
0 -rwh 4 Apr 01
2000 23:55:24 snmpboots
1 (*)
-rw- 4724347 Apr 01 2000 23:59:45 s3600.bin
2 (*) -rw- 1475 Apr 01
2000 23:59:53 3comoscfg.cfg
3 -rw- 1737 Apr 02
2000 00:46:21 cfg.cfg
4 -rw- 279296 Apr 02
2000 00:21:55 love.rar
5 -rw- 428 Apr 02
2000 13:07:11 hostkey
6 -rwh 151 Apr 01
2000 23:58:39 private-data.txt
7 -rw- 572 Apr 02
2000 13:07:20 serverkey
8 -rw- 1589 Apr 02
2000 00:58:20 1.cfg
15367 KB total (10475 KB free)
(*) -with main attribute (b) -with
backup attribute
(*b) -with both main and backup
attribute
# Display the information about all the
files whose names begin with the character t (including those in the recycle
bin) in the local directory unit1>flash:/test/.
<H3C> dir /all test/t*
Directory of unit1>flash:/test/
0 -rw- 279296 Apr 04
2000 14:45:19 test.txt
15367 KB total (3720 KB free)
(*) -with main attribute (b) -with
backup attribute
(*b) -with both main and backup
attribute
Syntax
execute
filename
View
System view
Parameter
filename: Batch
file, with the extension .bat.
Description
Use the execute command to execute
the specified batch file.
This command executes command lines in the batch
file in sequence. Note that the batch file cannot contain any invisible
character. If any invisible character is found, the command will quit the current
execution process and the executed operations are not cancelled automatically.
The batch execution command is the
automation of executing commands in a batch file. However it
l
Does not guarantee that every command in the
file is executed.
l
Does not perform hot backup.
l
Does not restrict the forms and contents of
commands in the file.
Example
# Execute the batch file named test.bat
under the directory flash:/.
<H3C> system-view
System View: return to User View with
Ctrl+Z.
[H3C] execute test.bat
<H3C>
....
%Created dir unit1>flash:/test3.
Syntax
file prompt {
alert | quiet }
View
System view
Parameter
alert: Specifies
to prompt for confirmation before performing file-related operations that have
potential risks.
quiet: Specifies
to disable prompts for file-related operations.
Description
Use the file prompt command to
configure the prompt mode for file-related operations.
By default, alert mode is used, by which a
switch prompts for confirmation before performing file-related operations that
have potential risks.
If you set the prompt mode of the
file-related operations to quiet, the switch does not prompt for
confirmation before performing file-related operations. In this case, the
system is more likely to operate improperly if irretrievable file-related
operations are performed. For example, if the prompt mode is set to alert,
the following messages will be displayed when you delete a file:
<H3C> delete
unit1>flash:/te.txt
Delete unit1>flash:/te.txt?[Y/N]:y
......
%Delete file unit1>flash:/te.txt...Done.
If the prompt mode is set to quiet,
the following messages will be displayed when you delete a file:
<H3C> delete
unit1>flash:/te.txt
....
%Delete file
unit1>flash:/te.txt...Done.
Example
# Set the prompt mode to quiet for
file-related operations.
<H3C>
system-view
System View: return to User View with
Ctrl+Z.
[H3C] file prompt quiet
Syntax
fixdisk device
View
User view
Parameter
device: Name
of a device.
Description
Use the fixdisk command to restore
space on the Flash memory.
In case that space on the Flash memory may
become unavailable for reasons such as abnormal operations, you can run this
command to restore the space.
Example
# Restore space on the Flash memory.
<H3C> fixdisk flash:
Fixdisk flash: may take some time to
complete.
%Fixdisk unit1>flash: completed.
Syntax
format device
View
User view
Parameter
device: Name
of a device.
Description
Use the format command to format the
Flash memory.
Caution:
The format
operation leads to the loss of all the files on the Flash memory, and the
operation is irretrievable.
Example
# Format the Flash memory.
<H3C>format unit1>flash:
All data on unit1>flash: will be
lost , proceed with format ? [Y/N]:y
..............................
%Format unit1>flash: completed.
Syntax
mkdir directory
View
User view
Parameter
directory:
Name of a directory.
Description
Use the mkdir command to create a
directory in the specified directory of a Flash memory.
Note that the names of the directories and
files in the same directory must be unique.
Example
# Create a directory in the current
directory, with the name being dd.
<H3C> mkdir dd
....
%Created dir unit1>flash:/dd.
Syntax
more file-url
View
User view
Parameter
file-url:
Path name or file name of a file in the Flash memory.
Description
Use the more command to display the
contents of a specified file.
Currently, the contents of a file can only
be displayed in text.
Example
# Display the content of the file named test.txt.
<H3C> more test.txt
AppWizard has created this test
application for you.
This file contains a summary of what
you will find in each of the files that make up your test application.
Test.dsp
This file (the project file) contains
information at the project level and is used to build a single project or
subproject. Other users can share the project (.dsp) file, but they should
export the makefiles locally.
Syntax
move fileurl-source
fileurl-dest
View
User view
Parameter
fileurl-source:
Path name or file name of the source file in the Flash memory.
fileurl-dest:
Path name or file name of the target file in the Flash memory.
Description
Use the move command to move a file
to a specified directory.
If the target file name is the same as an
existing file, the system prompts you for the confirmation to overwrite the existing
file.
Example
# Move the file named 1.txt from flash:/ to
flash:/a/ within unit1, with the name unchanged.
<H3C>move unit1>flash:/1.txt unit1>flash:/a/
Move unit1>flash:/1.txt to
unit1>flash:/a/1.txt?[Y/N]:y
.
%Moved file unit1>flash:/1.txt to
unit1>flash:/a/1.txt.
Syntax
pwd
View
User view
Parameter
None
Description
Use the pwd command to display the
current path.
Example
# Display the current path.
<H3C> pwd
unit1>flash:
Syntax
rename fileurl-source
fileurl-dest
View
User view
Parameter
fileurl-source:
Original path name or file name of a file in the Flash memory.
fileurl-dest:
Target path name or file name.
Description
Use the rename command to rename a
file or a directory.
If the target file name or directory name
is the same with any existing file name or directory name, you will fail to perform
the rename operation.
Example
# Rename the file named config.txt to config.bak.
<H3C>rename config.txt config.bak
Rename unit1>flash:/config.txt to
unit1>flash:/config.bak?[Y/N]:y
.
%Renamed file unit1>flash:/config.txt
to unit1>flash:/config.bak.
Syntax
reset recycle-bin
[ file-url ] [ /force ]
reset recycle-bin
[ /fabric ]
View
User view
Parameter
file-url:
Path name or file name of a file in the Flash memory. This argument supports
the wildcard “*”.
/force: Specifies not to prompt for
confirmation before deleting files.
/fabric: Specifies to clear the
recycle bins of all Flash memories in the fabric.
Description
Use the reset recycle-bin command to
clear the recycle bin in the Flash memory.
The files deleted by the delete
command are moved to the recycle bin. To delete them permanently, you can use
the reset recycle-bin command.
The system will not
prompt you to confirm deletion of each file when you clear recycle bins
throughout the fabric.
Example
# Clear the recycle bin in unit 1 of the
fabric.
<H3C>reset recycle-bin unit1>flash:/
Clear unit1>flash:/te.txt ?[Y/N]:y
Clearing files from flash may take a
long time. Please wait...
.....
%Cleared file unit1>flash:/~/te.txt.
Syntax
rmdir directory
View
User view
Parameter
directory:
Name of a directory.
Description
Use the rmdir command to delete a
directory.
As only empty directories can be deleted,
you need to clear a directory before deleting it.
Example
# Delete the directory named dd.
<H3C> rmdir dd
Rmdir unit1>flash:/dd?[Y/N]:y
....
%Removed directory
unit1>flash:/dd.
Syntax
undelete file-url
View
User view
Parameter
file-url:
Path name or file name of a file in the Flash memory.
Description
Use the undelete command to restore a
deleted file from the recycle bin.
If the name of the file to be restored is
the same as that of an existing file, the system prompts you for the
confirmation to overwrite the latter.
Example
# Restore the deleted file named sample.bak.
<H3C> undelete sample.bak
Undelete unit1>flash:/sample.bak
?[Y/N]:y
% Undeleted file unit1>flash:/sample.bak.
Syntax
update fabric file-name
View
User view
Parameter
file-name: Name
of the file to be upgraded, a string comprising 1 to 64 characters.
Description
Use the update fabric command to use
an app file, Boot ROM or Web file on a device in the fabric to upgrade all the
units in the fabric.
Caution:
Use the update fabric command after all traffics are stopped.
Global upgrade to app, Web and Boot ROM
files is supported currently. The types of files to be upgraded can be
distinguished by the file extension. For example, S3600.bin, S3600.btm and S3600.web
represents host software, Boot ROM files and Web files respectively.
l
You can upgrade files with such extensions as web,
bin and btm.
l
The file used for upgrading must exist in the
root directory of a unit in the fabric.
l
After the upgrade is completed, the file used
for upgrading will be copied to the root directories of other units in the
fabric.
l
When you execute the update fabric command,
the system first collects the free space information of each unit and then
decides whether the available Flash memory space is enough on each unit. The
available space should be at least 1 K larger than the size of file used for upgrading.
If any space inefficiency is found, the system will prompt the user to provide
enough space on the Flash memory of the unit. Otherwise, the upgrade cannot be
implemented.
l
Before the file is copied to all units, the
system collects version information of files in the corresponding type, compares
the version compatibility, and outputs the result. If the file used for
upgrading cannot replace the corresponding file on any unit, the command fails
and a message is given, describing the failure reason.
Example
# Upgrade all units in the fabric with the
app file named s3600.bin on the local unit.
<H3C>display
irf-fabric
Fabric name is 3600, system mode is
L3.
Fabric authentication : no
authentication, number of units in stack: 1.
Unit
Name Unit ID
First
1(*)
First
2
First
8
<H3C>update fabric s3600.bin
This will update the Fabric.
Continue? [Y/N] y
The software is verifying ...
The result of verification is :
Unit ID Free space(bytes)
Enough Version comparison
1 2126848
Y Y
2 2125824
Y Y
8 1439744
Y Y
warning: the verification is
completed, start the file transmission [Y/N] y
The fabric is being updated, 100%
The s3600.bin is stored on unit 1
successfully
The s3600.bin is stored on unit 2
successfully
The s3600.bin is stored on unit 8
successfully
Do you want to set s3600.bin to be
running agent next time to boot[Y/N] y
The s3600.bin is configured
successfully
Syntax
backup { unit
unit-id | fabric } current-configuration to { dest-addr
| dest-hostname } filename.cfg
View
User view
Parameter
unit-id:
Unit ID of a switch.
fabric:
Specifies to back up the configuration of the whole fabric system.
dest-addr: IP
address of a TFTP server.
dest-hostname: Host name of a TFTP server.
filename.cfg:
Name of the configuration file to which the current configuration will be
backed up, a string of 5 to 56 characters (including the extension .cfg).
Description
Use the backup unit
current-configuration to command to back up the current configuration of a
specified switch to a file on a TFTP server.
Use the backup fabric
current-configuration to command to back up the current configurations of
all the switches in the fabric to a file on a TFTP server.
Example
# Back up the current configuration of unit 8 to the file aaa.cfg on the TFTP server whose IP address is 1.1.1.253.
<H3C> backup unit 8
current-configuration to 1.1.1.253 aaa.cfg
Backup current configuration to
1.1.1.253. Please wait...
File will be transferred in binary
mode.
Copying file to remote tftp server.
Please wait...
TFTP: 1958 bytes sent in 2
second(s).
File uploaded successfully.
Unit 8: Backup current
configuration finished!
# Back up the current
configuration of the whole fabric to the file aaa.cfg
on the TFTP server whose IP address is 1.1.1.253.
<H3C> backup fabric
current-configuration to 1.1.1.253 aaa.cfg
Backup current configuration to
1.1.1.253. Please wait...
File will be transferred in binary
mode.
Copying file to remote tftp server.
Please wait...
TFTP: 2029 bytes sent in 2
second(s).
File uploaded successfully.
Unit 7: Backup current
configuration finished!
Unit 8: Backup current
configuration finished!
Syntax
restore { unit
unit-id | fabric } startup-configuration from { source-addr
| source-hostname } filename.cfg
View
User view
Parameter
unit-id:
Unit ID of a switch.
fabric:
Specifies to restore the configuration of the whole fabric system.
source-addr:
IP address of a TFTP server.
source-hostname: Host name of a TFTP server
filename.cfg:
Name of the configuration file to be restored to, a string of 5 to 56
characters (including the extension .cfg).
Description
Use the restore unit
startup-configuration from command to restore the startup configuration of
a specified switch from a file on a TFTP server.
Use the restore fabric
startup-configuration from command to restore the startup configuration of
the whole fabric from a file on a TFTP server.
Example
# Restore the startup configuration of unit
7 from the file aaa.cfg on the TFTP server with the IP address 1.1.1.253.
<H3C> restore unit 7
startup-configuration from 1.1.1.253 aaa.cfg
Restore startup configuration from
1.1.1.253. Please wait...
File will be transferred in binary
mode.
Downloading file from remote tftp
server, please wait...
TFTP: 1958 bytes sent in 0
second(s).
File downloaded successfully.
Unit 7: Restore startup current
configuration finished!
# Restore the startup configuration of the
whole fabric from the file bbb.cfg on the TFTP server with the IP address
1.1.1.253.
<H3C> restore fabric
startup-configuration from 1.1.1.253 bbb.cfg
Restore startup configuration from
1.1.1.253. Please wait...
File will be transferred in binary
mode.
Downloading file from remote tftp
server, please wait...
TFTP: 2029 bytes sent in 0
second(s).
File downloaded successfully.
Unit 7: Restore startup current
configuration finished!
Unit 8: Restore startup current
configuration finished!
