Syntax
display link-aggregation interface interface-type interface-number [ to
interface-type interface-number ]
View
Any view
Parameter
interface-type: Port type.
interface-number: Port number.
to:
Specifies a group of contiguous ports..
Description
Use the display link-aggregation
interface command to display the link aggregation details about a specified
port or port range, including:
l
Link aggregation group ID, port priority,
operation key and protocol status flag of the port at the local end;
l
Device ID, port number, port priority, operation
key and protocol status flag at the remote end, and,
l
LACP protocol packet statistics.
Note that, for a manual aggregation group,
value 0 is displayed for all the above items of the remote end (which does not
indicate the real information of the remote end), since information about the
remote end cannot be obtained for a manual aggregation group.
Example
# Display the link aggregation details on
Ethernet1/0/1.
<H3C> display link-aggregation
interface Ethernet1/0/1
Ethernet1/0/1:
Selected AggID: 1
Local:
Port-Priority: 32768, Oper key:
2, Flag: 0x45
Remote:
System ID: 0x8000,
0000-0000-0000
Port Number: 0, Port-Priority:
32768 , Oper-key: 0, Flag: 0x38
Received LACP Packets: 0
packet(s), Illegal: 0 packet(s)
Sent LACP Packets: 0 packet(s)
Table 1-1 Description on the fields of the display link-aggregation
interface command
|
Field
|
Description
|
|
Selected AggID
|
ID of the aggregation group to which the
specified port belongs
|
|
Local
|
Information about the local end
|
|
Port-Priority
|
Port priority
|
|
Oper key
|
Operation key
|
|
Flag
|
Protocol status flag
|
|
Remote
|
Information about the remote end
|
|
System ID
|
Remote device ID
|
|
Port number
|
Port number
|
|
Received LACP Packets: 0 packet(s),
Illegal: 0 packet(s)
Sent LACP Packets: 0 packet(s)
|
Statistics about LACP packets
|
Syntax
display link-aggregation summary
View
Any view
Parameter
None
Description
Use the display link-aggregation summary
command to display summary information of all aggregation groups, including
device ID of the local end, aggregation group ID, aggregation group type,
device ID of the remote end, number of the selected ports, number of the
unselected ports, load sharing type and master port number.
Example
# Display summary information of all
aggregation groups.
<H3C> display link-aggregation
summary
Aggregation Group Type:D -- Dynamic,
S -- Static , M -- Manual
Loadsharing Type: Shar -- Loadsharing,
NonS -- Non-Loadsharing
Actor ID: 0x8000, 000f-e20f-5104
AL AL
Partner ID Select Unselect Share Master
ID Type Ports
Ports Type Port
--------------------------------------------------------------------------
1 S 0x8000,0000-0000-0000
0 1 NonS Ethernet1/0/2
2 M none 0
1 NonS Ethernet1/0/3
Table 1-2 Description on the fields of the display link-aggregation summary
command
|
Field
|
Description
|
|
Aggregation Group Type
|
Aggregation group type
|
|
Actor ID
|
Local device ID
|
|
AL ID
|
Aggregation group ID
|
|
AL Type
|
Aggregation group type: D (dynamic), S
(static), or M (manual)
|
|
Partner ID
|
ID of the remote device, including the
system priority and system MAC address of the remote device (in the dynamic
or static aggregation group, if the LACP protocol is disabled on the remote
port of the logical master port, the partner ID displays
0x8000,0000-0000-0000 )
|
|
Select Ports
|
Number of the selected ports
|
|
Unselect Ports
|
Number of the unselected ports
|
|
Share Type
|
Load sharing type: Shar (load-sharing),
or NonS (non-load-sharing)
|
|
Master Port
|
Number of the master port
|
Syntax
display link-aggregation verbose [ agg-id ]
View
Any view
Parameter
agg-id:
Aggregation group ID to be displayed, which ranges from 1 to 416 and must be
the ID of an existing aggregation group.
Description
Use the display link-aggregation verbose
command to display the details about a specified aggregation group or all
aggregation groups, including:
l
Aggregation group ID, aggregation group type,
load sharing type, aggregation group description string, and device ID;
l
Local end details: local port, port status, port
priority, operation key and protocol status flag;
l
Remote end details: local port, remote port
index, remote port priority, operation key, device ID and protocol status flag.
Note that, for a manual aggregation group,
value 0 is displayed for all the above items of the remote end (which does not
indicate the real information of the remote end), since information about the
remote end cannot be obtained for a manual aggregation group.
Example
# Display the details about aggregation
group 1.
<H3C> display link-aggregation
verbose 1
Loadsharing Type: Shar -- Loadsharing,
NonS -- Non-Loadsharing
Flags: A -- LACP_Activity, B -- LACP_timeout,
C -- Aggregation,
D -- Synchronization, E --
Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregation ID: 1, AggregationType:
Static, Loadsharing Type: NonS
Aggregation Description: abc
System ID: 0x16, 0012-a990-2240
Port Status: S -- Selected, U --
Unselected
Local:
Port Status
Priority Key Flag
-------------------------------------------------------------------------
Ethernet1/0/4 S
32768 2 {ACDEFG}
Ethernet1/0/5 U
32768 2 {ACG}
Remote:
Actor Partner
Priority Key SystemID Flag
--------------------------------------------------------------------------
Ethernet1/0/4 0
32768 0 0x8000,0000-0000-0000 {DEF}
Ethernet1/0/5 0 32768
0 0x8000,0000-0000-0000 {DEF}
Table 1-3 Description on the fields of
the display link-aggregation verbose command
|
Field
|
Description
|
|
Loadsharing Type
|
Loadsharing type, including Loadsharing
and Non-Loadsharing
|
|
Flags
|
Flag types of LACP
|
|
Aggregation ID
|
Aggregation group ID
|
|
Aggregation Description
|
Aggregation group description string
|
|
AggregationType
|
Aggregation group type
|
|
System ID
|
Device ID
|
|
Port Status
|
Port status, including selected and
unselected
|
Syntax
display lacp system-id
View
Any view
Parameter
None
Description
Use the display lacp system-id
command to display the device ID of the local system, including the system
priority and the MAC address.
Related command: link-aggregation.
Example
# Display the device ID of the local
system.
<H3C> display lacp system-id
Actor System ID: 0x8000, 000f-e20f-0100
Table 1-4 Description on the fields of
the display lacp system-id command
|
Field
|
Description
|
|
Actor System ID
|
Device ID of the local system, including
the system priority and the system MAC address
|
Syntax
lacp enable
undo lacp enable
View
Ethernet port view
Parameter
None
Description
Use the lacp enable command to
enable the LACP protocol.
Use the undo lacp enable command to
disable the LACP protocol.
Example
# Enable the LACP protocol on
Ethernet1/0/1.
<H3C> system-view
System View: return to User View with
Ctrl+Z.
[H3C] interface Ethernet1/0/1
[H3C-Ethernet1/0/1] lacp enable
Syntax
lacp port-priority
port-priority
undo lacp
port-priority
View
Ethernet port view
Parameter
port-priority: Port priority, ranging from 0 to 65,535 and defaulting to 32,768.
Description
Use the lacp port-priority
command to set the priority of the current port.
Use the undo lacp port-priority
command to restore the default port priority.
Related command: display
link-aggregation verbose, and display link-aggregation interface.
Example
# Set the priority of Ethernet1/0/1 to 64.
<H3C> system-view
System View: return to User View with
Ctrl+Z.
[H3C] interface Ethernet1/0/1
[H3C-Ethernet1/0/1] lacp
port-priority 64
Syntax
lacp system-priority
system-priority
undo lacp
system-priority
View
System view
Parameter
system-priority: System priority, ranging from 0 to 65,535 and defaulting to
32,768.
Description
Use the lacp system-priority
command to set the system priority.
Use the undo lacp system-priority
command to restore the default system priority.
Example
# Set the system priority to 64.
<H3C> system-view
System View: return to User View with
Ctrl+Z.
[H3C] lacp system-priority 64
Syntax
link-aggregation group agg-id description agg-name
undo link-aggregation group agg-id description
View
System view
Parameter
agg-id:
Aggregation group ID, in the range of 1 to 416.
agg-name:
Aggregation group name, a string of 1 to 32 characters.
Description
Use the link-aggregation group agg-id
description command to set a description for an aggregation group.
Use the undo link-aggregation group agg-id
description command to remove the description of the aggregation
group.
If you have saved
the current configuration with the save command, after system reboot,
the manual and static aggregation groups and their descriptions still exist,
but the dynamic aggregation groups and their descriptions disappear.
Related command: display
link-aggregation verbose.
Example
# Set the description "abc" for
aggregation group 1.
<H3C> system-view
System View: return to User View with
Ctrl+Z.
[H3C] link-aggregation group 1
description abc
Syntax
link-aggregation group agg-id mode { manual | static }
undo link-aggregation group agg-id
View
System view
Parameter
agg-id:
Aggregation group ID, in the range of 1 to 416.
manual:
Creates a manual aggregation group.
static:
Creates a static aggregation group.
Description
Use the link-aggregation group agg-id
mode command to create a manual or static aggregation group.
Use the undo link-aggregation group
command to remove an aggregation group.
Related command: display link-aggregation
summary.
Example
# Create manual aggregation group 22
<H3C> system-view
System View: return to User View with
Ctrl+Z.
[H3C] link-aggregation group 22 mode
manual
Syntax
port link-aggregation group agg-id
undo port link-aggregation group
View
Ethernet port view
Parameter
agg-id:
Aggregation group ID, in the range of 1 to 416.
Description
Use the port link-aggregation group
command to add the current Ethernet port to a manual or static aggregation
group.
Use the undo port link-aggregation group
command to remove the current Ethernet port from the aggregation group.
Related command: display
link-aggregation verbose.
Example
# Add Ethernet 1/0/1 to aggregation group
22.
<H3C> system-view
System View: return to User View with
Ctrl+Z.
[H3C] interface Ethernet1/0/1
[H3C-Ethernet1/0/1] port
link-aggregation group 22
Syntax
reset lacp statistics [ interface interface-type interface-number [ to
interface-type interface-number ] ]
View
User view
Parameter
interface-type: Port type
interface-number: Port number
to:
Specifies a group of contiguous ports.
Description
Use the reset lacp statistics
command to clear LACP statistics on specified port(s), or on all ports if no
port is specified.
Related command: display
link-aggregation interface.
Example
# Clear LACP statistics on all Ethernet
ports.
<H3C> reset lacp statistics
