00-1Cover

H3C S3600 Series Ethernet Switches

Command Manual

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Manual Version: T2-08192T-20070724-C-1.04

Product Version: Release 1510

H3C S3600 Series Ethernet Switches  Operation Manual-Release 1510

It is used for assisting the users in data configurations and typical applications.

H3C S3600 Series Ethernet Switches  Installation Manual

It provides information for the system installation.

1 CLI

Introduces the commands used for switching between the command levels and command level setting.

2 Login

Introduces the commands used for logging into the Ethernet switch.

3 Configuration File Management

Introduces the commands used for configuration file management.

4 VLAN

Introduces the commands used for configuring VLAN.

5 IP Address and Performance Configuration

Introduces the commands used for IP address configuration and IP performance configuration.

6 Management VLAN

Introduces the commands used for configuring the management VLAN and DHCP/BOOTP client configuration.

7 Voice VLAN

Introduces the commands used for voice VLAN configuration.

8 GVRP

Introduces the commands used for GVRP configuration.

9 Port Basic Configuration

Introduces the commands used for basic port configuration.

10 Link Aggregation

Introduces the commands used for link aggregation.

11 Port Isolation

Introduces the commands used for port isolation.

12 Port Security-Port Binding

Introduces the commands used for port security configuration and port binding.

13 DLDP

Introduces the commands used for DLDP configuration.

14 MAC Address Table

Introduces the commands used for MAC address forwarding table management.

15 Auto Detect

Introduces the commands used for auto detect configuration.

16 MSTP

Introduces the STP-related commands.

17 Routing Protocol

Introduces the commands used for routing protocol configuration.

18 Multicast

Introduces the commands used for multicast configuration.

19 802.1x

Introduces the commands used for 802.1x configuration.

20 AAA-RADIUS-HWTACACS-EAD

Introduces the commands used for AAA, RADIUS, HWTACACS, and EAD configuration.

21 VRRP

Introduces the commands used for VRRP configuration.

22 Centralized MAC Address Authentication

Introduces the commands used for centralized MAC address authentication configuration.

23 ARP

Introduces the ARP-related commands.

24 DHCP

Introduces the commands used for DHCP server, DHCP relay, and DHCP-snooping configuration.

25 ACL

Introduces the ACL-related commands.

26 QoS-QoS Profile

Introduces the commands used for QoS and QoS profile configuration.

27 Web Cache Redirection

Introduces the commands used for Web cache redirection configuration.

28 Mirroring

Introduces the commands used for port mirroring.

29 IRF Fabric

Introduces the commands used for IRF fabric configuration.

30 Cluster

Introduces the commands used for cluster management.

31 PoE-PoE Profile

Introduces the commands used for PoE and PoE profile configuration.

32 UDP Helper

Introduces the commands used for UDP Helper configuration.

33 SNMP-RMON

Introduces the commands used for SNMP and RMON configuration.

34 NTP

Introduces the NTP-related commands.

35 SSH Terminal Service

Introduces the commands used for SSH configuration.

36 File System Management

Introduces the commands used for file system management.

37 FTP and TFTP

Introduces the FTP-/TFTP-related commands.

38 Information Center

Introduces the commands used for information center configuration.

39 System Maintenance and Debugging

Introduces the commands used for system maintenance and debugging.

40 VLAN-VPN

Introduces the commands used for VLAN VPN configuration.

41 HWPing

Introduces the commands used for HWPing configuration.

42 DNS

Introduces the commands used for DNS configuration.

43 Access Management

Introduces the commands used for Access Management configuration

44 Appendix

Lists all the commands described in this command manual in an alphabetic order. The parts and pages where the commands are described are also given.

Boldface

The keywords of a command line are in Boldface.

italic

Command arguments are in italic.

[ ]

Items (keywords or arguments) in square brackets [ ] are optional.

{ x | y | ... }

Alternative items are grouped in braces and separated by vertical bars. One is selected.

[ x | y | ... ]

Optional alternative items are grouped in square brackets and separated by vertical bars. One or none is selected.

{ x | y | ... } *

Alternative items are grouped in braces and separated by vertical bars. A minimum of one or a maximum of all can be selected.

[ x | y | ... ] *

Optional alternative items are grouped in square brackets and separated by vertical bars. Many or none can be selected.

#

A line starting with the # sign is comments.

  Warning

Means reader be extremely careful. Improper operation may cause bodily injury.

  Caution

Means reader be careful. Improper operation may cause data loss or damage to equipment.

&  Note

Means a complementary description.