|
|
|
|
|
|
|
|
|
H3C S3100-SI Series Ethernet
Switches
|
|
Installation Manual
|
|
|
|
|
|
|
|
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Manual Version: T2-08045Y-20070415-C-1.05
|
Copyright
© 2006-2007, Hangzhou H3C Technologies Co., Ltd. and its licensors
All Rights Reserved
No part of this manual may be reproduced
or transmitted in any form or by any means without prior written consent of Hangzhou
H3C Technologies Co., Ltd.
Trademarks
H3C, 
, Aolynk, 
, H3Care, 
, TOP G, 
, IRF, NetPilot, Neocean, NeoVTL, SecPro, SecPoint,
SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V2G, VnG,
PSPT, XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou H3C
Technologies Co., Ltd.
All other trademarks that may be mentioned
in this manual are the property of their respective owners.
Notice
The information in this document is
subject to change without notice. Every effort has been made in the preparation
of this document to ensure accuracy of the contents, but all statements,
information, and recommendations in this document do not constitute the
warranty of any kind, express or implied.
To obtain the latest information, please
access:
http://www. h3c.com
Technical
Support
customer_service@h3c.com
http://www. h3c.com
About
This Manual
Related
Documentation
In addition
to this manual, each H3C S3100-SI Series Ethernet Switches documentation set
includes the following:
|
Manual
|
Description
|
|
H3C S3100-SI Series Ethernet Switches Operation Manual
|
It is used for assisting the users in
data configurations and typical applications.
|
|
H3C S3100-SI Series Ethernet Switches Command Manual
|
It is used for assisting the users in using
various commands.
|
|
H3C S3100-SI Series Ethernet Switches
Quick Start
|
It is used for assisting the users in
switch installation.
|
Organization
H3C
S3100-SI Series Ethernet Switches Installation Manual is organized as follows:
|
Chapter
|
Contents
|
|
1 Product Overview
|
Introduces the characteristics and technical specifications of S3100-SI Series Ethernet Switches.
|
|
2 Installation Preparation
|
Introduces the installation preparation and precaution of S3100-SI
Series Ethernet Switches.
|
|
3 Installation
|
Introduces the procedures
to install an S3100-SI Series Ethernet Switch, including the setup of the mainframe, cards and cables.
|
|
4 First Power-on
|
Introduces the booting process of an S3100-SI Series Ethernet Switch,
including the power-on booting of the switch and the system initialization.
|
|
5 BootROM and Host Software Loading
|
Introduces how to load BootROM and host
software for an S3100-SI Series Ethernet Switch.
|
|
6 Maintenance and Troubleshooting
|
Introduces the problems that might occur
during the installation and the booting of an S3100-SI Series
Ethernet Switch and the related
solution.
|
|
7 Appendix Lightning Protection of
the Switch
|
Introduces
lightning protection of S3100-SI Series Ethernet Switches.
|
Conventions
The manual
uses the following conventions:
I. GUI conventions
|
Convention
|
Description
|
|
< >
|
Button names are inside angle brackets. For example, click
<OK>.
|
|
[ ]
|
Window names, menu items, data table and field
names are inside square brackets. For example, pop up the [New User] window.
|
|
/
|
Multi-level menus are separated by forward
slashes. For example, [File/Create/Folder].
|
II. Symbols
|
Convention
|
Description
|
|
 Warning
|
Means reader be extremely
careful. Improper operation may cause bodily injury.
|
|
 Caution
|
Means reader be careful. Improper operation may
cause data loss or damage to equipment.
|
|
& Note
|
Means a complementary description.
|
Environmental Protection
This product has been designed to comply
with the requirements on environmental protection. For the proper storage, use
and disposal of this product, national laws and regulations must be observed.
