|
|
|
|
|
|
|
|
|
H3C S3100-52P Ethernet Switch
|
|
Installation Manual
|
|
|
|
|
|
|
|
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Manual Version:
T2-08048P-20070410-C-1.01
|
Copyright
© 2006-2007, Hangzhou H3C Technologies Co., Ltd. and its licensors
All Rights Reserved
No part of this manual may be reproduced
or transmitted in any form or by any means without prior written consent of Hangzhou
H3C Technologies Co., Ltd.
Trademarks
H3C, 
, Aolynk, 
, H3Care, 
, TOP G, 
, IRF, NetPilot, Neocean, NeoVTL, SecPro, SecPoint,
SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V2G, VnG,
PSPT, XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou H3C
Technologies Co., Ltd.
All other trademarks that may be mentioned
in this manual are the property of their respective owners.
Notice
The information in this document is
subject to change without notice. Every effort has been made in the preparation
of this document to ensure accuracy of the contents, but all statements,
information, and recommendations in this document do not constitute the
warranty of any kind, express or implied.
To obtain the latest information, please
access:
http://www. h3c.com
Technical
Support
customer_service@h3c.com
http://www. h3c.com
About
This Manual
Related
Documentation
In addition
to this manual, each H3C S3100-52P Ethernet Switch documentation set includes
the following:
|
Manual
|
Description
|
|
H3C S3100-52P Ethernet Switch Operation Manual
|
It is used for assisting the users in device configuration and typical applications.
|
|
H3C S3100-52P Ethernet Switch Command Manual
|
It is used for assisting the users in using
various commands.
|
Organization
H3C
S3100-52P Ethernet Switch Installation Manual is
organized as follows:
|
Chapter
|
Contents
|
|
1 Product Overview
|
Introduces the
characteristics and technical specifications of S3100-52P Ethernet Switches.
|
|
2 Preparing for Installation
|
Introduces the installation preparation
and precaution of S3100-52P Ethernet Switches.
|
|
3 Installing the Switch
|
Introduces the procedures to install an S3100-52P Ethernet Switch, including the setup of the mainframe, cards, power supply, and cables.
|
|
4 Starting up the Switch at the Initial Boot
|
Introduces the
booting process of an S3100-52P Ethernet Switch,
including the power-on booting of the switch and the system initialization.
|
|
5 Loading Boot ROM and Host Software
|
Introduces the ways to load BootROM and host software
for an S3100-52P Ethernet Switch.
|
|
6 Maintenance and Troubleshooting
|
Introduces the
problems that might occur during the installation and the booting of an S3100-52P Ethernet Switch and the corresponding solutions.
|
|
Appendix Lightning
Protection of the Switch
|
Introduces
lightning protection of an S3100-52P Ethernet Switch.
|
Conventions
The manual
uses the following conventions:
I. GUI conventions
|
Convention
|
Description
|
|
< >
|
Button names are inside angle brackets. For example, click
<OK>.
|
|
[ ]
|
Window names, menu items, data table and field
names are inside square brackets. For example, pop up the [New User] window.
|
|
/
|
Multi-level menus are separated by forward
slashes. For example, [File/Create/Folder].
|
II. Symbols
|
Convention
|
Description
|
|
 Warning
|
Means reader be
extremely careful. Improper operation may cause bodily injury.
|
|
 Caution
|
Means reader be careful. Improper operation may
cause data loss or damage to equipment.
|
|
& Note
|
Means a complementary description.
|
Environmental Protection
This product has been designed to comply
with the requirements on environmental protection. For the proper storage, use
and disposal of this product, national laws and regulations must be observed.
