Manual Version

20080710-C-1.05

Product Version

This manual is applicable to multiple software versions of the S3100 series Ethernet switches, as listed bellow:

l           S3100-SI series: Release 2102 and Release 2107

l           S3100-EI series: Release 2104, Release 2107 and Release 2107P01

The supported features are different between these software versions. For details, refer to the tables bellow. New features were added into the later software versions. Find the appropriate features in this manual according to the software version of your switch.

Software Version of S3100-SI

Added Features Compared with The Earlier Version

Manual

Release 2107

Assigning MAC Addresses for Ethernet Ports

14-MAC Address Table Management

ARP Source MAC Address Consistency Check

20-ARP

Local authentication after failed of remote authentication

18-AAA

Unauthorized DHCP Server Detection

21-DHCP

SNMP AES 128

27-SNMP-RMON

rsa peer-public-key import

29-SSH

FTP disconnect

31-FTP-SFTP-TFTP

Identifying and Diagnosing Pluggable Transceivers

33-System Maintenance and Debugging

IPv6 Management

36-IPv6 Management

 

Software Version of S3100-EI

Added Features Compared with The Earlier Version

Manual

Release 2107P01

Configuring loopback detection for a list of ports in bulk

09-Port Basic Configuration

Enabling auto-shutdown of loopback ports

ARP Source MAC Address Consistency Check

20-ARP

Release 2107

Assigning MAC Addresses for Ethernet Ports

14-MAC Address Table Management

Traffic Shaping

23-QoS-QoS Profile

SNMP AES 128

27-SNMP-RMON

rsa peer-public-key import

29-SSH

FTP disconnect

31-FTP-SFTP-TFTP

 

Organization

H3C S3100 Series Ethernet Switches Command Manual is organized as follows:

Part

Contents

1 CLI

Introduces the commands used for switching between the command levels and command level setting.

2 Login

Introduces the commands used for logging into the Ethernet switch.

3 Configuration File Management

Introduces the commands used for configuration file management.

4 VLAN

Introduces the commands used for configuring VLAN.

5 Management VLAN

Introduces the commands used for configuring the management VLAN.

6 IP Address-IP Performance

Introduces the commands used for IP address configuration and IP performance configuration.

7 Voice VLAN

Introduces the commands used for voice VLAN configuration.

8 GVRP

Introduces the commands used for GVRP configuration.

9 Port Basic Configuration

Introduces the commands used for basic port configuration.

10 Link Aggregation

Introduces the commands used for link aggregation.

11 Port Isolation

Introduces the commands used for port isolation.

12 Port Security-Port Binding

Introduces the commands used for port security configuration and port binding.

13 DLDP

Introduces the commands used for DLDP configuration.

14 MAC Address Table Management

Introduces the commands used for MAC address forwarding table management.

15 MSTP

Introduces the STP-related commands.

16 Multicast

Introduces the commands used for multicast configuration.

17 802.1x-System Guard

Introduces the commands used for 802.1x-System Guard configuration.

18 AAA

Introduces the commands used for AAA, RADIUS, HWTACACS, and EAD configuration.

19 MAC Address Authentication

Introduces the commands used for MAC address authentication configuration.

20 ARP

Introduces the ARP-related commands.

21 DHCP

Introduces the commands used for DHCP, DHCP-snooping configuration.

22 ACL

Introduces the ACL-related commands.

23 QoS-QoS Profile

Introduces the commands used for QoS and QoS profile configuration.

24 Mirroring

Introduces the commands used for port mirroring.

25 Stack-Cluster

Introduces the commands used for cluster management.

26 PoE-PoE Profile

Introduces the commands used for PoE and PoE profile configuration.

27 SNMP-RMON

Introduces the commands used for SNMP and RMON configuration.

28 NTP

Introduces the NTP-related commands.

29 SSH

Introduces the commands used for SSH configuration.

30 File System Management

Introduces the commands used for file system management.

31 FTP-SFTP-TFTP

Introduces the FTP-/SFTP-/TFTP-related commands.

32 Information Center

Introduces the commands used for information center configuration.

33 System Maintenance and Debugging

Introduces the commands used for system maintenance and debugging.

34 VLAN-VPN

Introduces the commands used for VLAN VPN configuration.

35 HWPing

Introduces the commands used for HWPing configuration.

36 IPv6 Management

Introduces the commands used for IPv6 Management configuration.

37 DNS

Introduces the commands used for DNS configuration.

38 Smart Link-Monitor Link

Introduces the commands used for Smart Link, Monitor Link configuration

39 Appendix

Lists all the commands described in this command manual in an alphabetic order. The parts and pages where the commands are described are also given.