Syntax
count times
undo count
View
HWPing test group view
Parameters
times:
Number of probes in each test. The times argument ranges from 1 to 15.
Description
Use the count command to set the
number of probes in each test.
Use the undo count command to
restore the default.
For tests except jitter test, only one
packet is sent in a probe. In a jitter test, you can use the jitter-packetnum
command to set the number of packets to be sent in a probe.
By default, the number of probes in each
test is 1.
Related commands: frequency.
Examples
# Set the number of probes made in an ICMP test
to 10.
<Sysname> system-view
System View: return to User View with
Ctrl+Z
[Sysname] hwping administrator icmp
[Sysname-hwping-administrator-icmp] test-type
icmp
[Sysname-hwping-administrator-icmp]
count 10
Syntax
datasize
size
undo datasize
View
HWPing test group view
Parameters
size: Size
of a test packet in bytes. The value range varies with the test types.
Table 1-1
Value range of the HWPing test packets
|
Test type
|
Value range (in bytes)
|
Default (in bytes)
|
|
Jitter
|
68 to 8100
|
68
|
|
ICMP
|
4 to 8100
|
56
|
|
Udpprivate
|
4 to 8100
|
100
|
|
Udppublic
|
4 to 8100
|
100
|
The packet size configuration applies to
ICMP, UDP, and jitter tests only.
Description
Use the datasize command to
configure the size of a test packet in a test.
Use the undo datasize command to
restore the default.
Examples
# Set the size of ICMP test packets to 50
bytes.
<Sysname> system-view
System View: return to User View with
Ctrl+Z.
[Sysname] hwping administrator icmp
[Sysname-hwping-administrator-icmp] test-type
icmp
[Sysname-hwping-administrator-icmp]
datasize 50
Syntax
destination-ip ip-address
undo destination-ip
View
HWPing test group view
Parameters
ip-address:
Destination IP address of a HWPing (pronounced Hua’Wei Ping) test.
Description
Use the destination-ip command to
configure a destination IP address of a HWPing test.
Use the undo destination-ip command
to remove the configured destination IP address.
By default, no destination IP address is
configured for a HWPing test.
Related commands: destination-port.
The destination
address can be an IP address or a host name in HTTP test, while in other types
of tests, it must be an IP address.
Examples
# Set the destination IP address of an ICMP
test to 169.254.10.3.
<Sysname> system-view
System View: return to User View with
Ctrl+Z
[Sysname] hwping administrator icmp
[Sysname-hwping-administrator-icmp] test-type
icmp
[Sysname-hwping-administrator-icmp]
destination-ip 169.254.10.3
Syntax
destination-port port-number
undo destination-port
View
HWPing test group view
Parameters
port-number:
Destination port number for a HWPing test, in the range of 1 to 65535.
Description
Use the destination-port command to
configure a destination port number for a HWPing test.
Use the undo destination-port
command to remove the configured destination port number.
By default, no destination port number is
configured for a test.
Related commands: destination-ip.
l
The destination-port command has effect
on jitter, TCP-Private, and UDP-Private tests only.
l
You are not recommended to perform a TCP, UDP,
or jitter test on a well-known port (ports with a
number ranging from 1 to 1023) or on a port with a port number greater than
50000. Otherwise, the HWPing test will fail or the corresponding service of the
well-known port will become unavailable.
Examples
# Set the destination port number for a tcpprivate
test to 9000.
<Sysname> system-view
System View: return to User View with
Ctrl+Z
[Sysname] hwping administrator tcp
[Sysname-hwping-administrator-tcp] test-type
tcpprivate
[Sysname-hwping-administrator-tcp] destination-port
9000
Syntax
display hwping { results | history } [ administrator-name operation-tag
]
View
Any view
Parameters
results:
Displays results of the last test.
history:
Displays the history records of tests.
administrator-name: Name of the administrator who created the HWPing test operation, a
string of 1 to 32 characters.
operation-tag: Operation tag, a string of 1 to 32 characters.
Description
Use the display hwping command to
display the result of the last HWPing test or the history of HWPing tests.
Without administrator-name test-operation-tag
specified, the command displays the results of all test groups; without administrator-name
test-operation-tag specified, the command displays the results of the
specified test group.
Related commands: test-enable.
Examples
# Display the result of the test group with
the administrator name being administrator, and the operation tag being icmp.
[Sysname-hwping-administrator-icmp] display
hwping results administrator icmp
HWPing entry(admin administrator,
tag icmp) test result:
Destinationip address:10.2.2.2
Send operation times:
10 Receive response times: 10
Min/Max/Average Round Trip
Time: 1/2/1
Square-Sum of Round Trip Time:
13
Last succeeded test time:
2004-11-25 16:28:55.0
Extend result:
SD Maximal delay:
0 DS Maximal delay: 0
Packet lost in test: 0%
Disconnect operation
number:0 Operation timeout number:0
System busy operation
number:0 Connection fail number:0
Operation sequence
errors:0 Drop operation number:0
Other operation errors:0
Table 1-2 Description on the fields of the display hwping result command
|
Field
|
Description
|
|
Destination ip address
|
Destination IP address
|
|
Send operation times
|
Number of probes made
|
|
Receive response times
|
Number of received response packets
|
|
Min/Max/Average Round Trip Time
|
Minimum/maximum/average roundtrip time
|
|
Square-Sum of Round Trip Time
|
Square sum of roundtrip time
|
|
Last succeeded test time
|
Completion time of the last successful
test
|
|
SD Maximal delay
|
Maximum delay from the source to the
destination
|
|
DS Maximal delay
|
Maximum delay from the destination to the
source
|
|
Packet lost in test
|
Average packet loss ratio
|
|
Disconnect operation number
|
Number of times the test was disconnected
by the remote end
|
|
System busy operation number
|
Number of times the test failed because
the system was busy
|
|
Operation sequence errors
|
Number of out-of-sequence packets
received
|
|
Other operation errors
|
Number of other errors
|
|
Operation timeout number
|
Number of time-out occurrences in a test
|
|
Connection fail number
|
Number of failures to connect with the remote
end
|
|
Drop operation number
|
Number of system resource allocation
failures
|
# Display the history records of HWPing
tests.
[Sysname-hwping-administrator-icmp]
display hwping history administrator icmp
HWPing entry(admin administrator,
tag icmp) history record:
Index Response Status
LastRC Time
1 1
1 0 2004-11-25 16:28:55.0
2 1
1 0 2004-11-25 16:28:55.0
3 1
1 0 2004-11-25 16:28:55.0
4 1
1 0 2004-11-25 16:28:55.0
5 1
1 0 2004-11-25 16:28:55.0
6 2
1 0 2004-11-25 16:28:55.0
7 1
1 0 2004-11-25 16:28:55.0
8 1
1 0 2004-11-25 16:28:55.0
9 1
1 0 2004-11-25 16:28:55.9
10 1
1 0 2004-11-25 16:28:55.9
Table 1-3 Description on the fields of the display hwping history command
|
Field
|
Description
|
|
Response
|
Roundtrip
time in the case of a successful test, timeout time in the case of test timeout,
or 0 in the case of a test failure (in milliseconds)
|
|
Status
|
Test result values, including:
1: responseReceived: Response received
2: unknown: Unknown error.
3: internalError: System internal error
4: requestTimeOut: Request timed out
5: unknownDestinationAddress: Unknown destination
address
6: noRouteToTarget: Destination unreachable
7: interfaceInactiveToTarget: Interface to
destination address inactive
8: arpFailure: ARP operation failed.
9: maxConcurrentLimitReached: Maximum limit
of concurrent accesses reached
10: unableToResolveDnsName: Unable to
resolve DNS domain name
11: invalidHostAddress: Invalid host
address
|
|
LastRC
|
Response code in the last ICMP response
packet received. (The device does not support this field at present, so that
this field is always displayed as 0)
|
|
Time
|
Test completion time
|
# Display the result of the test group with
the administrator name being administrator, and the operation tag being http.
[Sysname-hwping-administrator-http] display
hwping results administrator http
HWPing entry(admin administrator,
tag http) test result:
Destination ip
address:192.168.0.152
Send operation times:
10 Receive response times: 10
Min/Max/Average Round Trip
Time: 47/87/74
Square-Sum of Round Trip Time:
57044
Last succeeded test time:
2000-4-2 20:41:50.4
Extend result:
SD Maximal delay:
0 DS Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number:
0 Operation timeout number: 0
System busy operation number:
0 Connection fail number: 0
Operation sequence errors:
0 Drop operation number: 0
Other operation errors: 0
Http result:
DNS Resolve Time:
0 HTTP Operation Time: 675
DNS Resolve Min Time:
0 HTTP Test Total Time: 748
DNS Resolve Max Time:
0 HTTP Transmission Successful Times: 1
DNS Resolve Failed Times:
0 HTTP Transmission Failed Times: 0
DNS Resolve Timeout Times:
0 HTTP Transmission Timeout Times: 0
TCP Connect Time:
73 HTTP Operation Min Time: 27
TCP Connect Min Time:
5 HTTP Operation Max Time: 80
TCP Connect Max Time: 20
TCP Connect Timeout Times:
0
Table 1-4
Description on the fields of the display hwping
result command
|
Field
|
Description
|
|
DNS Resolve Time
|
Time used for a DNS resolution
|
|
HTTP Operation Time
|
Total time used to establish an HTTP connection
|
|
DNS Resolve Min Time
|
Minimal time used for a DNS resolution
|
|
HTTP Test Total Time
|
Total time used for an HTTP test
|
|
DNS Resolve Max Time
|
Maximum time used for a DNS resolution
|
|
HTTP Transmission Successful Times
|
Number of successful HTTP transmissions
|
|
DNS Resolve Failed Times
|
Number of failed DNS resolutions
|
|
HTTP Transmission Failed Times
|
Number of failed HTTP transmissions
|
|
DNS Resolve Timeout Times
|
DNS resolution timeout times
|
|
HTTP Transmission Timeout Times
|
HTTP transmission timeout times
|
|
TCP Connect Time
|
Total time used to establish a TCP
connection
|
|
HTTP Operation Min Time
|
Minimum time used to establish an HTTP connection
|
|
TCP Connect Min Time
|
Minimum time used to establish a TCP
connection
|
|
HTTP Operation Max Time
|
Maximum time used to establish an HTTP connection
|
|
TCP Connect Max Time
|
Maximum time used to establish a TCP
connection
|
|
TCP Connect Timeout Times
|
TCP connection timeout times
|
# Display the result of the test group with
the administrator name being administrator, and the operation tag being Jitter.
[Sysname-hwping-administrator-Jitter]
display hwping results administrator Jitter
HWPing entry(admin administrator, tag
Jitter) test result:
Destination ip address:10.2.2.2
Send operation times:
100 Receive response times: 100
Min/Max/Average Round Trip
Time: 9/21/13
Square-Sum of Round Trip Time:
18623
Last succeeded test time:
2000-4-2 8:14:58.2
Extend result:
SD Maximal delay:
10 DS Maximal delay: 10
Packet lost in test: 0%
Disconnect operation number:
0 Operation timeout number: 0
System busy operation number:
0 Connection fail number: 0
Operation sequence errors:
0 Drop operation number: 0
Other operation errors: 0
Jitter result:
RTT Number:100
Min Positive
SD:1 Min Positive DS:1
Max Positive
SD:6 Max Positive DS:8
Positive SD
Number:38 Positive DS Number:25
Positive SD Sum:85
Positive DS Sum:42
Positive SD
average:2 Positive DS average:1
Positive SD Square
Sum:267 Positive DS Square Sum:162
Min Negative
SD:1 Min Negative DS:1
Max Negative SD:6
Max Negative DS:8
Negative SD
Number:30 Negative DS Number:24
Negative SD
Sum:64 Negative DS Sum: 41
Negative SD
average:2 Negative DS average:1
Negative SD Square
Sum:200 Negative DS Square Sum:161
SD lost packets
number:0 DS lost packet number:0
Unkown result lost packet
number:0
Table 1-5
Description on the fields of the display hwping
result command
|
Field
|
Description
|
|
RTT Number
|
Number of received response packets
|
|
Min Positive SD
|
Minimum positive jitter delay from the
source to the destination
|
|
Min Positive DS
|
Minimum positive jitter delay from the
destination to the source
|
|
Max Positive SD
|
Maximum positive jitter delay from the
source to the destination
|
|
Max Positive DS
|
Maximum positive jitter delay from the
destination to the source
|
|
Positive SD Number
|
Number of positive jitter delays from the
source to the destination
|
|
Positive DS Number
|
Number of positive jitter delays from the
destination to the source
|
|
Positive SD Sum
|
Sum of positive jitter delays from the
source to the destination
|
|
Positive DS Sum
|
Sum of positive jitter delays from the
destination to the source
|
|
Positive SD average
|
Average of positive jitter delays from the
source to the destination
|
|
Positive DS average
|
Average of positive jitter delays from
the destination to the source
|
|
Positive SD Square Sum
|
Sum of the square of positive jitter
delays from the source to the destination
|
|
Positive DS Square Sum
|
Sum of the square of positive jitter
delays from the destination to the source
|
|
Min Negative SD
|
Minimum absolute value of negative jitter
delays from the source to the destination
|
|
Min Negative DS
|
Minimum absolute value of negative jitter
delays from the destination to the source
|
|
Max Negative SD
|
Maximum absolute value of negative jitter
delays from the source to the destination
|
|
Max Negative DS
|
Maximum absolute value of negative jitter
delays from the destination to the source
|
|
Negative SD Number
|
Number of negative jitter delays from the
source to the destination
|
|
Negative DS Number
|
Number of negative jitter delays from the
destination to the source
|
|
Negative SD Sum
|
Sum of absolute values of negative jitter
delays from the source to the destination
|
|
Negative DS Sum
|
Sum of absolute values of negative jitter
delays from the destination to the source
|
|
Negative SD average
|
Average of negative jitter delays from
the source to the destination
|
|
Negative DS average
|
Average of negative jitter delays from
the destination to the source
|
|
Negative SD Square Sum
|
Sum of the square of negative jitter
delays from the source to the destination
|
|
Negative DS Square Sum
|
Sum of the square of negative jitter
delays from the destination to the source
|
|
SD lost packets number
|
Number of lost packets from the source to
the destination
|
|
DS lost packet number
|
Number of lost packets from the
destination to the source
|
|
Unknown result lost packet number
|
Number of lost packets for unknown
reasons
|
# Display the result of the test group with
the administrator name being administrator, and the operation tag being dns.
[Sysname] display hwping results
administrator dns
HWPing entry(admin administrator, tag
dns) test result:
Destination ip address:10.2.2.2
Send operation times:
10 Receive response times: 10
Min/Max/Average Round Trip
Time: 6/10/8
Square-Sum of Round Trip Time:
756
Last succeeded test time:
2006-11-28 11:50:40.9
Extend result:
SD Maximal delay:
0 DS Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number:
0 Operation timeout number: 0
System busy operation number:
0 Connection fail number: 0
Operation sequence errors:
0 Drop operation number: 0
Other operation errors: 0
Dns result:
DNS Resolve Current Time:
10 DNS Resolve Min Time: 6
DNS Resolve Times:
10 DNS Resolve Max Time: 10
DNS Resolve Timeout Times:
0 DNS Resolve Failed Times: 0
Table 1-6
Description on the fields of the display hwping
result command
|
Field
|
Description
|
|
DNS Resolve Current Time
|
Default time used for a DNS resolution
|
|
DNS Resolve Min Time
|
Minimum time used for a DNS resolution
|
|
DNS Resolve Times
|
Number of DNS resolutions
|
|
DNS Resolve Max Time
|
Maximum time used for a DNS resolution
|
|
DNS
Resolve Timeout Times
|
DNS
resolution timeout times
|
|
DNS
Resolve Failed Times
|
Number of
failed DNS resolutions
|
The description on
a specific field is available for the test results of all types of tests, so that
not the description on the output information of all types of tests is provided
here.
Syntax
dns-server ip-address
undo dns-server
View
HWPing test group view
Parameters
ip-address:
IP address to be assigned to a domain name server (DNS).
Description
Use the dns-server command to
configure the IP address of a DNS server.
Use the undo dns-server command to
remove the IP address of a DNS server.
By default, no DNS server IP address is
configured.
l
This command applies to DNS and HTTP tests only.
l
For an HTTP test, if configuring the destination
address as the host name, you must configure the IP address of the DNS server
to resolve the host name into an IP address, which is the destination IP
address of this HTTP test
Examples
# Set 192.168.1.1 as the IP address of the
DNS server.
<Sysname> system-view
System View: return to User View with
Ctrl+Z
[Sysname] hwping administrator dns
[Sysname-hwping-administrator-dns] test-type
dns
[Sysname-hwping-administrator-dns] dns-server
192.168.1.1
Syntax
dns resolve-target domain-name
undo dns resolve-target
View
HWPing test group view
Parameters
domain-name:
Domain name to be resolved, in the range of 1 to 60 characters.
Description
Use the dns resolve-target command
to configure a domain name to be resolved.
Use the undo resolve-target command
to remove a domain name to be resolved.
By default, no dns resolve-target
information is configured.
This command
applies to DNS tests only.
Examples
# Configure the domain name to be resolved
as www.test.com.
<Sysname> system-view
System View: return to User View with
Ctrl+Z
[Sysname] hwping administrator dns
[Sysname-hwping-administrator-dns] test-type
dns
[Sysname-hwping-administrator-dns] dns
resolve-target www.test.com
Syntax
filename file-name
undo filename
View
HWPing test group view
Parameters
file-name:
Name of the file to be downloaded/uploaded in FTP tests, a string of 1 to 255
characters.
Description
Use the filename command to specify
a file to be downloaded/uploaded in FTP tests.
Use the undo filename command to
remove the configured file name.
By default, no file name is configured for
FTP tests.
Related commands: username, password,
and ftp-operation.
The filename
command applies to FTP tests only.
Examples
# Specify to transmit
“config.txt” between HWPing client and FTP server in an FTP test.
<Sysname> system-view
System View: return to User View with
Ctrl+Z
[Sysname] hwping administrator ftp
[Sysname-hwping-administrator-ftp] test-type
ftp
[Sysname-hwping-administrator-ftp]
filename config.txt
Syntax
frequency
interval
undo frequency
View
HWPing test group view
Parameters
interval:
Automatic test interval in seconds. It ranges from 0 to 65,535.
Description
Use the frequency command to
configure the time interval of performing automatic tests.
Use the undo frequency command to
restore the default.
If interval is configured greater
than 0, the system performs automatic tests at this interval.
