H3C S3100-SI Series Ethernet Switches Command Manual-Release 0011(V1.04)

Download

Manual Version

T2-081937-20070415-C-1.04

Product Version

Release 0011

Organization

H3C S3100-SI Series Ethernet Switches Command Manual is organized as follows:

Part

Contents

CLI

Introduces the commands used for switching between the command levels and command level setting.

Login

Introduces the commands used for logging into the Ethernet switch.

VLAN

Introduces the commands used for configuring VLAN and Voice VLAN.

Management VLAN

Introduces the commands used for configuring the management VLAN and DHCP/BOOTP configuration.

GVRP

Introduces the GVRP-related commands.

Port Basic Configuration

Introduces the port-related commands.

Link Aggregation

Introduces the commands used for link aggregation.

Port Isolation

Introduces the commands used for port isolation.

MAC Address Forwarding Table

Introduces the commands used for MAC address forwarding table management.

MSTP

Introduces the STP-related commands.

802.1x

Introduces the 802.1x-related commands.

AAA-RADIUS-HWTACACS

Introduces the commands used for AAA and RADIUS.

Centralized MAC Address Authentication

Introduces the commands used for centralized MAC address authentication.

ARP

Introduces the ARP-related commands.

DHCP-Snooping

Introduces the commands used for DHCP snooping.

ACL

Introduces the ACL-related commands.

QoS

Introduces the QoS-related commands.

IGMP Snooping

Introduces the commands used for IGMP snooping.

Stack-Cluster

Introduces the commands used for cluster management.

SNMP

Introduces the SNMP-related commands.

RMON

Introduces the RMON-related commands.

NTP

Introduces the NTP-related commands.

SSH Terminal Service

Introduces the commands used for configuring SSH2.0.

File System Management

Introduces the commands used for file system management.

FTP and TFTP

Introduces the FTP-/TFTP-related commands.

Information Center

Introduces the commands used for configuring the information center.

System Maintenance and Debugging

Introduces the commands used for system maintenance and debugging.

Appendix

Lists all the commands described in this command manual in an alphabetic order. The parts and pages where the commands are described are also given.