Syntax
display isolate port
View
Any view
Parameter
None
Description
Use the display isolate port command
to display the information about the Ethernet ports added to an isolation
group.
Example
# Display the information about the Ethernet
ports added to the isolation group.
<H3C> display isolate port
Isolated port(s) on UNIT 1:
Ethernet1/0/2, Ethernet1/0/3,
Ethernet1/0/4
Syntax
port isolate
undo port isolate
View
Ethernet port view
Parameter
None
Description
Use the port isolate command to add
the current Ethernet port to the isolation group.
Use the undo port isolate command to
remove the current Ethernet port from the isolation group.
By default, an isolation group contains no
port.
Example
# Add Ethernet1/0/1 port to the isolation
group.
<H3C> system-view
System View: return to User View with
Ctrl+Z.
[H3C] interface ethernet1/0/1
[H3C-Ethernet1/0/1] port isolate
# Remove Ethernet1/0/1 port from the
isolation group.
[H3C-Ethernet1/0/1] undo port isolate
