Syntax
display isolate port
View
Any view
Parameter
None
Description
Use the display isolate port command
to display information about the Ethernet ports added to the isolation group.
Example
# Display information about the Ethernet
ports added to the isolation group.
<H3C> display isolate port
Isolated port(s) on UNIT 1:
Ethernet1/0/2, Ethernet1/0/3,
Ethernet1/0/4
The information above shows that
Ethernet1/0/2, Ethernet1/0/3, and Ethernet1/04 are in the isolation group.
Syntax
port isolate
undo port isolate
View
Ethernet port view
Parameter
None
Description
Use the port isolate command to add
an Ethernet port to the isolation group.
Use the undo port isolate command to
remove an Ethernet port from the isolation group.
When the port
isolate command or the undo port isolate command is executed on a
member port of an aggregation group, the other ports in the same aggregation
group on the local unit will be added to or removed from the isolation group together
at the same time.
By default, the isolation group contains no
port.
Example
# Add Ethernet1/0/1 to the isolation group.
<H3C> system-view
System View: return to User View with
Ctrl+Z.
[H3C] interface ethernet1/0/1
[H3C-Ethernet1/0/1] port isolate
All aggregated ports in same unit
will join isolated group together
# Remove Ethernet1/0/1 from the isolation
group.
[H3C-Ethernet1/0/1] undo port isolate
All aggregated ports in same unit
will join isolated group together
