1 Getting Started

introduces routine management commands and commands associated with working mode of SecPath firewalls.

2 System Management

introduces commands of SecPath firewalls used in file system, software upgrading, displaying and debugging tools, information center, log maintenance, NTP, SNMP, RMON and RMON2.

3 Interface

presents the commands used for the configurations of Ethernet interface, AUX interface and logical interface.

4 Link Layer Protocol

describes the commands used for the configurations of PPP, PPPoE and VLAN.

5 Network and Routing Protocol

deals with the commands involved in the configurations of IP address, IP performance, address resolution, DHCP relay, static route, RIP route, OSPF route, BGP route, and policy route.

6 Security Defence

provides the commands for configuring the virtual firewall, ACL basics, security policy, NAT, IDS Cooperation and AAA.

7 VPN

deals with the commands used in the VPN solution (including L2TP and DVPN applications), as well as that for configuring IPSec.

8 Reliability

provides the commands used in the configurations of route redundancy and dual-system hot backup.

9 Command Index

lists all the commands in this manual in the letter sequence and designates the module and page for each command.