1 Product Overview

Briefly introduces the product specifications, as well as the features and applications of the H3C SecPath F1000-E Firewall.

2 Interface Modules

Describes the interface cards and interface modules supported by the H3C SecPath F1000-E Firewall.

3 Preparing for Installation

Describes the requirements of the H3C SecPath F1000-E Firewall on installation site, the safety recommendations before and during installation, and the required tools.

4 Installing the Firewall

Introduces how to install the SecPath F1000-E, as well as how to connect the power cable, console cable, AUX port cable, Ethernet cable, interface card and interface module cable.

5 Starting and Configuring the Firewall

Helps you get familiar with the basic knowledge of how to boot and configure the H3C SecPath F1000-E Firewall, including device startup, power-on, and initialization of system files, and so on.

6 Maintaining Software

Introduces how to maintain the software of the H3C SecPath F1000-E Firewall, including upgrading the software and updating the configuration files.

7 Maintaining Hardware

Introduces how to maintain the hardware of the H3C SecPath F1000-E Firewall.

8 Troubleshooting

Describes some problems that may occur during installation and startup of the H3C SecPath F1000-E Firewall and how to solve them.