前面板上标有丝印：SPE-1010。
2 单板简介
单路业务处理板，具有1个子卡槽位，可配1个PIC系列半高或全高子卡。
l 单板规格
表1 SPE-1010业务处理板规格
属性 | 规格 |
单板尺寸（W×D） | 366.7mm×340mm |
功耗范围 | 87.46W～170 W |
子卡槽位数量 | 1 |
l 指示灯含义
SPE-1010业务处理板前面板指示灯含义如表2所示。
表2 SPE-1010业务处理板指示灯含义
指示灯 | 状态 | 含义 |
RUN | 灯常亮 | 表示业务处理板有故障 |
灯常灭 | 表示业务处理板有故障或单板不在位 |
灯正常闪烁 | 表示业务处理板正常工作 |
灯快速闪烁 | 业务处理板启动时RUN灯长亮或者快闪，一直处于快闪表示业务处理板注册不成功 |
3 注意事项
l 安装说明及主机软件版本的升级方法请参见“产品安装手册”的相关章节。
l 如果主机软件版本不匹配，请联系该设备的销售商或集成商获取最新的主机软件。
l 手册会随产品版本更新而升级，最新的资料请到网站上获取。
Copyright © 2008 杭州华三通信技术有限公司
SPE-1010 Card Manual
1 Card Identifier
The silkscreen SPE-1010 is printed on the front panel to identify the card.
2 Specifications
SPE-1010 is a single-path LPU with one subcard slot, featuring the option of one PIC series half-height or full-height subcard.
l Specifications
Table1 SPE-1010 specifications
Item | Specifications |
Dimensions (W × D) | 366.7 × 340 mm (14.43 ×13.39 in.) |
Power consumption range | 87.46W～170 W |
Number of subcard slots | 1 |
l LEDs
The following table lists the description of the LEDs on the front panel of SPE-1010.
Table2 LEDs of SPE-1010
LED | Status | Description |
RUN | Steady ON | The card is faulty. |
OFF | The card is faulty or out of position. |
Blinking | The card is working normally. |
Fast blinking | During the card startup, the RUN LED stays on or blinks fast. If the LED keeps blinking fast, it means the card startup has failed. |
3 Precautions
l For the installation instructions and the method of host software version upgrade, refer to the related sections in "Installation Manual".
l If the host software version does not match the one applicable to the subcard, contact the vendor or the integrator for the right version.
l The product manual may be updated with the product upgrade. Please access our website to get the latest documents.
Copyright © 2008 Hangzhou H3C Technologies Co., Ltd.
