CPOS Interface | CPOS, the channelized POS interface, enhances aggregation of low-speed ports, and improves the capacity of leased-line access. l CPOS interface overview l CPOS interface configuration l E1 channel configuration l T1 channel configuration |
POS Interface | Packet over SONET/SDH (POS) is a technology popular in WAN and MAN. It can support packet data such as IP packets. l POS port overview l POS port configuration |
Ethernet Interface | The volume describes Layer 2 and Layer 3 Ethernet interfaces. l General Ethernet interface configuration l Layer 2 Ethernet interface configuration l Layer 3 Ethernet interface/subinterface configuration |
WAN Interface | The volume describes the CE1 and CT1 WAN interfaces. |
GVRP | The GARP VLAN Registration Protocol (GVRP) is a GARP application. l GVRP configuration l GARP timer configuration |
HDLC | High-level Data Link Control (HDLC) is a bit-oriented link layer protocol. Its most prominent feature is that it can transmit any types of bit stream transparently. l HDLC overview l HDLC configuration |
Link Aggregation | Link aggregation aggregates multiple physical Ethernet ports into one logical link, also called a logical group l Link aggregation overview and types l Link aggregation configuration |
Port Mirroring | Port mirroring allows you to duplicate packets passing through a specific port (source port) to another port (destination port) connected with a data monitoring device for network monitoring and diagnosis. l Local port mirroring configuration l Remote port mirroring configuration |
PPP | Point-to-Point Protocol (PPP) is a link layer protocol that carries network layer packets over point-to-point links. l PPP configuration l MP configuration |
RPR | Resilient Packet Ring (RPR) is a new MAC layer protocol designed for transferring mass data services over MANs. It provides flexible and efficient networking schemes for broadband IP MANs carriers. l RPR overview l Protection mode configuration l Bandwidth reservation and rate limiting l Port type configuration |
MSTP | The multiple spanning tree protocol (MSTP) overcomes the shortcomings of STP and RSTP. It provides a better load sharing mechanism for redundant links. l Root bridge configuration l Leaf node configuration l Performing mCheck l Digest snooping configuration l No Agreement Check configuration l Protection function configuration |
VLAN | The volume describes VLAN (Virtual Local Area Network) configuration. l Basic VLAN configuration l Basic VLAN interface configuration l Port-based VLAN configuration |
QinQ | QinQ enables a service provider to serve customer networks comprising multiple VLANs by using a single VLAN. l QinQ overview l Basic QinQ configuration l TPID value for QinQ frame configuration |
BPDU Tunneling | l BPDU tunneling overview l BPDU transparent transmission configuration l Configuration of destination multicast MAC address for BPDU tunnel frames |
Port Isolation | To save VLAN resources, port isolation is introduced to isolate ports within a VLAN, allowing for great flexibility and security. l Port isolation overview l Isolation group configuration |
Logical Interface | Logical interfaces are virtual interfaces capable of data exchange but do not exist physically. l Loopback interface configuration l Null interface configuration l RPR logical interface configuration l Subinterface configuration l MP-group interface configuration |
Ethernet OAM | Ethernet OAM (operation, administration, and maintenance) is a network monitoring tool. l Basic Ethernet OAM functions configuration l Configuration of periods and thresholds for Ethernet OAM link error event detection l OAM loopback testing configuration |
ATM | Asynchronous Transfer Mode (ATM) is a technology based on packet transmission mode while incorporating the high speed of circuit transmission mode. l ATM interface configuration l ATM subinterface configuration l PVC parameters configuration l Configuration of applications carried by ATM |
VLAN Termination | VLAN termination is mainly used for communication between different VLANs, and communication between LANs and WANs. l VLAN termination overview l TPID configuration for VLAN packets l Configuration of QinQ termination |
