MPLS Volume Index

MPLS Basics Configuration

Multiprotocol Label Switching (MPLS) integrates both Layer 2 fasting switching and Layer 3 routing and forwarding, satisfying the networking requirements of various new applications. This manual describes the MPLS basics configuration commands.

MPLS-TE

MPLS TE combines the MPLS technologies and traffic engineering (TE) technologies. It reserves resources by establishing LSP tunnels to specific destinations. This allows traffic to bypass congested nodes to achieve appropriate load distribution. This manual describes the MPLS TE related commands.

VPLS

Virtual Private LAN Service (VPLS) can deliver point-to-multipoint L2VPN services over public networks. This manual describes VPLS related commands.

MPLS-L2VPN

MPLS L2VPN provides Layer 2 VPN services on MPLS networks. This manual describes MPLS L2VPN related commands.

MPLS-L3VPN

MPLS L3VPN is a kind of PE-based L3VPN technology for service provider VPN solutions. It uses BGP to advertise VPN routes and uses MPLS to forward VPN packets on service provider backbones. This manual describes MPLS L3VPN related commands.