specifications

Unit switching capacity

1152G/768G

768G

768G

480G

288G

192G

Backplane capacity

≥2.4Tbps

≥1.6Tbps

≥1.6Tbps

≥1Tbps

≥600Gbps

≥400Gbps

IPv4 packet forwarding rate

773Mpps/488Mpps

488Mpps

488Mpps

274Mpps

178Mpps

143Mpps

Number of slots

12

8

8 (vertical)

5

3

4

Number of traffic slots

10

6

6

3

3

2

Redundancy

Power supply and MCU redundancy

Power supply and MCU redundancy

Power supply and MCU redundancy

Power supply and MCU redundancy

Power supply redundancy

Single MCU

Power supply and MCU redundancy

Max. routing tables

128K

128K

128K

128K

128K

128K

Max. MAC addresses

128K

128K

128K

128K

128K

128K

L2 features

IEEE 802.1P (COS priority)

IEEE 802.1Q (VLAN)

IEEE 802.1d (STP)/802.1w (RSTP)/802.1s (MSTP)

IEEE 802.1ad (QinQ), QinQ and VLAN mapping

IEEE 802.3x (full duplex traffic control) and back pressure traffic control (semi-duplex)

IEEE 802.3ad (link convergence) and link convergence across boards

IEEE 802.3 (10Base-T)/802.3u (100Base-T)

IEEE 802.3z (1000BASE-X)/802.3ab (1000BaseT)

IEEE 802.3ae (10Gbase)

IEEE 802.3af (PoE)

Rapid Ring Protection Protocol (RRPP)

Ports across boards and traffic mirroring

Port broadcast/multicast/ unknown unicast storm suppression

Jumbo Frame

VLAN partition based on ports, protocols, subnet and MAC

SuperVLAN

PVLAN

Multicast VLAN+

GVRP

LLDP

IPv4 routing features

ARP Proxy

DHCP Relay

DHCP Server

Static route

RIPv1/v2

OSPFv2

IS-IS

BGPv4

OSPF/IS-IS/BGP GR (Graceful Restart)

Equal-cost route

Policy route

Routing policy

IPv6 routing features

ICMPv6

ICMPv6 redirection

DHCPv6

ACLv6

OSPFv3

RIPng

BGP4+

IS-ISv6

Manual tunnel

ISATAP

6to4 tunnel

IPv6 and IPv4 dual stack

Multicast protocols

IGMPv1/v2/v3

IGMPv1/v2/v3 Snooping

IGMP Filter

IGMP Fast leave

PIM-SM/PIM-DM/PIM-SSM

MSDP

AnyCast-RP

MLDv2/MLDv2 Snooping

PIM-SMv6, PIM-DMv6, PIM-SSMv6

ACL/QoS features

Standard and extended ACL

VLAN-based ACL

Ingress/Egress ACL

Ingress/Egress CAR, with a granularity of 64Kbps

Traffic shaping

802.1P/DSCP Priority Mark/Remark

Queue scheduling, including SP, WRR, SP+WRR and CBWFQ

8 queues per port

Congestion avoidance mechanisms, including Tail-Drop and WRED

Supported MPLS features

L3 MPLS VPN

L2 VPN: VLL (Martini, Kompella)

MCE

MPLS OAM

Security mechanisms

EAD security solution

Portal authentication

MAC authentication

IEEE 802.1x and IEEE 802.1x SERVER

AAA/Radius

HWTACACS and command line verification

SSHv1.5/SSHv2

ACL traffic filtering scheme

OSPF, RIPv2 and BGPv4 plain text and MD5 cipher text authentications

Hierarchical protection for command lines to prevent unauthorized and illegal access. Users of different levels are granted different configuration rights.

Telnet and password authentication for restricted IP addresses

Bindings of IP addresses, VLAN ID, MAC addresses and ports

uRPF

Active/standby data backup scheme

Error alarm and auto restore

Data log

System management

FTP, TFTP and Xmodem

SNMP v1/v2/v3

sFlow traffic accounting

RMON

NTP clock

Reliability

MCU 1 +1 redundancy backup

Power supply 1 +1 redundancy backup

Passive backplane design

Hot swap of all boards

VRRP

Ethernet OAM (802.3ah)

RRPP

Graceful Restart for OSPF/BGP/IS-IS

DLDP

VCT

Smart-Link

Hot fix

Requirements on environment

Temperature: 0°C–45°C

Relative humidity: 10%–95% (non condense)

Security specification and EMC certification

CE, FCC PART 15, TUV-GS, UL-CUL, ICES003 and VCCI

Power supply

Input DC: –48V – –60V

Input AC: 100V–240V

Maximum output power: 650W (S7502E), 1400W/2800W (S7503E/S7506E-V/S7506E/S7510E)

PoE power supply

Built-in PoE power supply

Dimensions (W × H × D) (mm)

436x 708 x 420

436 x 575 x 420

436 x 930 x 420

436 x 441 x 420

436 x 175 x 420

436 x 175 x 420

Full configuration weight (kg)

≤96kg

≤77kg

≤94kg

≤63kg

≤27kg

≤27kg