Specifications
Features | S5500-28C-EI | S5500-52C-EI | S5500-28C-PWR-EI | S5500-52C-PWR-EI | S5500-28F-EI | |||||||||
Switching capacity (Full duplex) | 128 Gbps | 176 Gbps | 128 Gbps | 176 Gbps | 128 Gbps | |||||||||
Throughput | 95.2 Mpps | 130.9 Mpps | 95.2 Mpps | 130.9 Mpps | 95.2 Mpps | |||||||||
Dimensions (W × D × H) mm | 440 × 300 × 43.6 | 440 × 420 × 43.6 | 440 × 360 × 43.6 | |||||||||||
Weight | 4 kg | 4.5 kg | 6 kg | 6.5 kg | 6.3 kg | |||||||||
Management port | 1 console interface | |||||||||||||
Service ports | 24 10/100/1000 BASE-T Ethernet ports, 4 Gigabit SFP ports (Combo) | 48 10/100/1000 BASE-T Ethernet ports, 4 Gigabit SFP ports (Combo) | 24 10/100/1000 BASE-T Ethernet ports, 4 Gigabit SFP ports (Combo) | 48 10/100/1000 BASE-T Ethernet ports, 4 Gigabit SFP ports (Combo) | 24 Gigabit SFP ports, eight 10/100/1000 BASE-T Ethernet ports (Combo) | |||||||||
Extension slot | 2 extension slots | |||||||||||||
Optional interface modules | 1-port 10GE XFP interface module 2-port 10GE XFP interface module 2-port 10GE CX4 interface module 2-port SFP interface module | |||||||||||||
POE (Power Of Ethernet) | No | Yes | No | |||||||||||
Port aggregation | Support LACP Support manual aggregation Support at most 14/26 aggregation groups, each supporting at most 8 GE ports or 4 10GE ports | |||||||||||||
Flow control | Support IEEE 802.3x (full duplex) Support storm suppression based on port rate percentage Support storm suppression based on PPS | |||||||||||||
VLAN | Support port-based VLAN (4k VLANs) Support MAC-based VLAN Support protocol-base VLAN Support QinQ, Selective QinQ Support VLAN Mapping Support Voice VLAN Support GVRP | |||||||||||||
STP | Support STP/RSTP/MSTP Support STP Root Guard Support BPDU Guard | |||||||||||||
MAC address table | Support 32K MAC addresses Support blackhole MAC addresses Support setting the maximum number of MAC addresses that can be learned at a port | |||||||||||||
IP routing | Support static route Support RIP v1/v2,RIPng Support OSPF v1/v2,OSPF v3 Support BGP, BGP4+ for IPV6 Support ECMP Support routing policies Support VRRP,VRRPv3 Support Policy Based Routing | |||||||||||||
MCE | Support MCE(Multi-VRF) | |||||||||||||
IPv6 | Support Neighbor Discovery (ND) Support PMTU Support IPv6 Ping and IPv6 Tracert Support IPv6 Telnet, TFTP Support manual configuration of tunnels Support 6to4 tunnels Support ISATAP tunnels | |||||||||||||
Multicast | Support IGMP Snooping v1/v2/v3, MLD Snooping v1/v2 Support IGMP v1/v2/v3, MLD v1/v2 Support PIM-DM, PIM-SM, PIM-SSM, MSDP Support MSDP,MSDP for IPv6 Support MBGP, MBGP for IPv6 | |||||||||||||
QoS/ACL | ACL | Support L2 ~ L4 packet filtering and provide flow classification based on the source MAC address, destination MAC address, source IP address (IPv4/IPv6), destination IP address (IPv4/IPv6), port, protocol or VLAN Support Time Range Support ACL policies in the ingress direction and the egress direction Support port based and VLAN-based ACL | ||||||||||||
QoS | Support bidirectional CAR (Committed Access Rate) Support 8 output queues at each port Support three scheduling modes: Strict Priority (SP), Weighted Round Robin (WRR) and SP+WRR Support packet redirection. Support re-labeling the 802.1p and DSCP priorities of a packet. | |||||||||||||
Mirror | Support flow mirroring Support port mirroring(N:4) Support RSPAN | |||||||||||||
Security | Support hierarchical management and password protection of users Support Portal, EAD Support AAA, Radius, and HWTacacs+ authentication Support 802.1X authentication Support centralized MAC address based authentication Support Guest VLAN Support SSH 2.0 Support port isolation Support port security Support binding of IP+MAC+port Support IP Source Check, ARP detection | |||||||||||||
Management and Maintenance | Support loading and upgrade via the XModem, File Transfer Protocol (FTP), and Trivial File Transfer Protocol (TFTP) Support configuration via CLI, Telnet, and Console port Support SNMPv1/v2/v3, RMON Support H3C iMC(Intelligent Management Centre), WEB management Support HGMPv2 Support NTP Support power alarms Support fan and temperature alarms Support the VCT (Virtual Cable Test) function Support Device Link Detection Protocol (DLDP) Support LLDP Support port loopback detection | |||||||||||||
Input voltage | AC | Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 47/63 Hz | ||||||||||||
DC | Rated voltage range: 10.8 V to 13.2 V DC | Rated voltage range: -52 V to –55 V DC | Rated voltage range: -48 V to –60 V DC | |||||||||||
Power consumption (in full configuration) | AC:110W DC:105w | 155 W | 575 W(AC input ), Dissipated power: 205 W POE power:370 W 485W(DC input) Dissipated power: 115 W POE power:370 W | 640 W(AC input ), Dissipated power: 270 W POE power:370 W 910W(DC input) Dissipated power: 170 W POE power:740 W | 115 W | |||||||||
Noise parameter | 42.6dBA(low speed) 49.7dBA)(high speed) | 41.3dBA(low speed) 50.1dBA)(high speed) | 48.1dBA(low speed) 51.1dBA)(high speed) | 49.5dBA(low speed) 54.1dBA)(high speed) | 45.3dBA(low speed) 50.4dBA)(high speed) | |||||||||
MTBF(years) | 22.27 | 20..43 | 22.36 | 19.44 | 24.29 | |||||||||
Operating temperature | 0°C to 45°C | |||||||||||||
Working environment RH (non-condensing) | 10% - 90% | |||||||||||||



Products