Configure RDMA monitoring

`Perform this task to collect information about physical intelligent NICs, including IP address, type, Rx and Tx packets, and dropped packets because of queue congestion. The information will be sent to the RDMA platform for display and analysis. The platform displays the data trend in the most recent 24 hours by default. You can view data for the most recent 15 days at maximum.

Start RDMA data reporting

1. On the top navigation bar, click System, and then select Parameters > RDMA Monitoring from the navigation pane.

2. Click Start to start RDMA data report.

Disable RDMA data reporting

1. On the top navigation bar, click System, and then select Parameters > RDMA Monitoring from the navigation pane.

2. Click Disable to disable RDMA data reporting.

Configure RDMA monitoring

1. On the top navigation bar, click System, and then select Parameters > RDMA Monitoring from the navigation pane.

2. Click Configure.

3. Configure the parameters as described in "Parameters_Ref101527409."

4. Click OK.

Parameters

• Enable: Specify whether to enable RDMA monitoring.

• IP Address: Specify the IP address of the RDMA platform.