Application monitor task management allows operators to monitor services on VMs by using application monitor policies.
A VM, a host, and a cluster support a maximum of 16, 256, and 1024 concurrent application HA tasks, respectively.
To monitor the states of applications for a VM, you must install CAStools for the VM.
All application HA monitor tasks of a cluster will be suspended if you disable HA for the cluster.
All application HA monitor tasks of a VM will be suspended if you disable HA for the VM or move the VM to the recycle bin.
On the top navigation bar, click Resources.
From the left navigation pane, select Compute > Host Pool Name > Cluster Name.
Click the App HA tab.
On the top navigation bar, click Resources.
From the left navigation pane, select Compute > Host Pool Name > Cluster Name.
Click the App HA tab.
Click Add App Monitoring Task.
Configure the parameters as described in "Parameters."
Click OK.
On the top navigation bar, click Resources.
From the left navigation pane, select Compute > Host Pool Name > Cluster Name.
Click the App HA tab.
Click Edit in the Actions column for the target application HA monitoring task.
Configure the parameters as described in "Parameters."
Click OK.
On the top navigation bar, click Resources.
From the left navigation pane, select Compute > Host Pool Name > Cluster Name.
Click the App HA tab.
Click Delete in the Actions column for the target application HA monitoring task.
In the dialog box that opens, click OK.
On the top navigation bar, click Resources.
From the left navigation pane, select Compute > Host Pool Name > Cluster Name.
Click the App HA tab.
Click Start in the Actions column for the target application HA monitoring task.
In the dialog box that opens, click OK.
On the top navigation bar, click Resources.
From the left navigation pane, select Compute > Host Pool Name > Cluster Name.
Click the App HA tab.
Click Suspend in the Actions column for the target application HA monitoring task.
In the dialog box that opens, click OK.
On the top navigation bar, click Resources.
From the left navigation pane, select Compute > Host Pool Name > Cluster Name.
Click the App HA tab.
Select one or multiple application HA monitoring tasks, and then select Start from the Bulk Actions list.
In the dialog box that opens, click OK.
On the top navigation bar, click Resources.
From the left navigation pane, select Compute > Host Pool Name > Cluster Name.
Click the App HA tab.
Select one or multiple application HA monitoring tasks, and then select Suspend from the Bulk Actions list.
In the dialog box that opens, click OK.
On the top navigation bar, click Resources.
From the left navigation pane, select Compute > Host Pool Name > Cluster Name.
Click the App HA tab.
Select one or multiple application HA monitoring tasks, and then select Delete from the Bulk Actions list.
In the dialog box that opens, click OK.
Task Name: Name of the application HA monitoring task.
Service Name: Name of the service being monitored.
Host: Name of the host to which the VM belongs.
Service State: State of the monitored service.
Task State: State of the task.
Located VM: Name of the VM that the task monitors.
Monitoring Policy: Name of the monitoring policy that the task uses.