H3C MSR 20-1X Routers Compliance and Safety Manual-(V1.03)

HomeSupportRoutersH3C MSR 20-1X Router SeriesInstall & UpgradeCompliance and Safety InformationH3C MSR 20-1X Routers Compliance and Safety Manual-(V1.03)
01-Text
Title Size Download
01-Text 1.11 MB

Safety Information/Sicherheits informationen/安全信息··· 1

Overview/Überblick/概述··· 1

Warning Symbol Conventions/ Erläuterung der Symbole/应用惯例··· 2

Important Safety Information/Wichtige Sicherheitshinweise/重要安全信息··· 3

Electricity Safety/Elektrische Sicherheit/用电安全··· 6

Hazardous Voltage/Gefährliche Spannungen /危险电压··· 6

Regulatory Compliance Information· 7

Regulatory compliance standards 7

European Directives compliance· 8

R&TTE Directive· 8

USA regulatory compliance· 9

FCC Part 15· 9

FDA·· 10

Canada regulatory compliance· 10

ICES-003· 10

Japan regulatory compliance· 10

VCCI 10

EN55022, AS/NZS CISPR 22, CISPR22 compliance· 10

Environmental notices 11

Waste Electrical and Electronic Equipment (WEEE) statements 11

English recycling notice· 11

Bulgarian recycling notice· 11

Czech recycling notice· 12

Danish recycling notice· 12

Dutch recycling notice· 12

Estonian recycling notice· 13

Finnish recycling notice· 13

French recycling notice· 13

German recycling notice· 14

Greek recycling notice· 14

Hungarian recycling notice· 14

Italian recycling notice· 15

Latvian recycling notice· 15

Lithuanian recycling notice· 15

Polish recycling notice· 16

Portuguese recycling notice· 16

Romanian recycling notice· 16

Slovak recycling notice· 17

Spanish recycling notice· 17

Swedish recycling notice· 17

RoHS material content declarations 18

Turkey RoHS material content declaration· 18

Ukraine RoHS material content declaration· 18

India RoHS material content declaration· 18

Perchlorate material — Special handling may apply· 18

 



Overview/Überblick/概述

 

Warning

Installation and removal of the unit and its accessories must be carried out by qualified personnel. You must read all of the Safety Instructions supplied with your equipment before installation and operation.

 

Warnung

Installation und Ausbau der Anlage und ihrer Zubehörteile müssen von qualifiziertem Personal realisiert werden. Sie müssen vor der Installation oder Bedienung allen beiliegenden Sicherheitshinweise lesen.

 

警告

负责安装和日常维护本设备及其配件的人员必须具备安全操作基本技能。在操作本设备前,请务必认真阅读和执行产品手册规定的安全规范。

 

Note

Note

Before any operation is performed, please read the operation instructions and precautions carefully to minimize the possibility of accidents. The Note, Caution, Warning and Danger items in other manuals do not cover all safety precautions that should be followed. They are only the supplements to the safety precautions for operations as a whole. Therefore, the personnel in charge of the installation and maintenance of the products are required to understand these basics of safety operation.

In performing various operations, please follow the local safety regulations. The safety precautions introduced in the product manuals are supplementary and subject to the local safety regulations.

When various operations are executed on the products, the precautions and special safety instructions provided with the products must be followed to the full.

The personnel in charge of the installation and maintenance of the products must be trained as professionals to master the proper operating methods and all safety precautions. Only the trained and qualified personnel can perform operations such as equipment installation and maintenance.

 

Note

Anmerkung

Lesen Sie bitte alle Bedienungsanweisungen und Sicherheitvorschriften sorgfältig durch, bevor Sie das Gerät in Betrieb nehmen. Nur durch Beachtung dieser Hinweise lässt sich das Unfallrisiko minimieren. Die in anderen Handbüchern aufgeführten Anmerkungen, Achtungen, Warnungen und Gefahren beinhalten nicht alle zu beachtenden Sicherheitvorschriften. Sie dienen lediglich als Ergänzung. Deshalb muss sich das für die Installation und Instandhaltung der Ausrüstung verantwortliche Personal mit allen Sicherheitshinweisen vertraut machen.

Bei verschiedenen Bedienungen müssen außerdem die örtlichen Sicherheitsvorschriften beachtet werden. Die in den Handbüchern der einzelnen Produkte aufgeführten Sicherheitshinweise sind Ergänzungen und unterliegen den nationalen Sicherheitsvorschriften.

Bei verschiedenen Bedienungen mit den Produkten sind deshalb grundsätzlich alle Sicherheitsvorschriften und spezifischen Sicherheitshinweise genau zu beachten.

Das für die Installation und Instandhaltung der Produkte verantwortliche Personal muss geschult werden, damit sie alle Sicherheitsvorschriften kennen und die Produkten richtig bedienen zu können. Nur geschultes und qualifiziertes Personal kann die Installation und Instandhaltung in korrekter Weise durchführen.

 

Note

说明

为了避免可能发生的事故,请在进行任何操作前,仔细阅读设备安装手册和本章节的安全规范。手册中 出现的说明、注意、警告、危险不能涵盖所有的安全预防,仅仅是在整个操作过程中的安全提示和补充。因此,负责安装和日常维护本设备的人员必须具备安全操作基本技能。

操作人员要按照当地的安全规范进行操作。出现在产品手册中的安全预防措施仅仅是当地安全规范的补充。

在操作本设备时,请认真执行产品手册规定的安全规范。

设备安装、维护人员必须通过专业培训,并且掌握足够的操作技能和安规预防意识。只有专业人员才能担任本设备的安装和维护工作。

 

Warning Symbol Conventions/ Erläuterung der Symbole/应用惯例

The symbols in this manual are shown in the following table. They are used to remind the reader of the safety precautions during equipment installation and maintenance.

Die in diesem Handbuch verwendeten Symbole sind in der folgenden Tabelle dargestellt. Diese Symbole sollen das Personal während der Installation und Instandhaltung der Ausrüstung an die Wichtigkeit der im Handbuch aufgeführten Sicherheitsvorschriften erinnern.

以下表格中的安全标识,是用来提示读者在进行设备安装和维护时的安全预防要求。

Table 1  Safety symbol and description/Sicherheitssymbole und Beschreibung/安全标识和描述

Safety Symbol

Symbole

安全标识

Description

Erläuterung

描述

Generic alarm symbol: To suggest a general safety concern.

Alarm: Hinweis auf ein generelles Sicherheitsproblem.

一般注意标识:用于一般安全提示。

ESD protection symbol: To suggest electrostatic-sensitive equipment.

ESD-Schutz: Hinweis auf ESD-gefährdete Bauteile.

防静电标识:用于表示设备对静电敏感。

Electric shock symbol: To suggest a danger of hazardous Voltage.

Elektrischer Schlag: Zeigt Gefährdungen durch gefährliche Spannungen an.

电击防护标识:用于表示高压危险。

 

Important Safety Information/Wichtige Sicherheitshinweise/重要安全信息

 

 

Caution: You must read all of the installation instructions in the Installation Guide supplied with your equipment and the following safety instructions before installation or operation.

Achtung: Sie müssen vor der Installation oder Bedienung das mit Ihrer Anlage mitgelieferten Installationshandbuch und die folgende Sicherheitshinweise lesen.

注意在安装和操作本设备时务必阅读设备安装手册的内容以及下文的所有安全说明。

WARNING: Installation and removal of the unit and it’s accessories must be carried out by qualified personnel.

Warnung: Installation und Ausbau der Einheit und ihrer Zubehörteile müssen von qualifiziertem Personal durchgeführt werden.

警告:必须由专业人员来安装和移动设备以及附件。

Caution: Do not block ventilation openings while the system is on, and keep at least 10cm distance from ventilation openings and walls or other things which may block the openings.

Achtung: Blockieren Sie die Lüftungsmündungen nicht, wenn das System läuft. Stellen Sie die Lüftungsmündungen mindestens 10 cm entfernt von den Wänden oder anderen Sachen, die die Mündungen blockieren können.

注意设备在工作时必须确保通风口的畅通确保设备离墙壁或是其它的可能堵塞通风口的物体的间距至少10cm

Warning: The separate earthing terminal must be permanently connected to earth.

Warnung:  Die separate Erdungsschiene muss dauerhaft geerdet sein.

警告:单独的接地端子必须永久连接到地。

Caution: The protective earthing / grounding conductor packaged with this product should be appropriately modified by a qualified electrician to lengths where required by local regulations. The conductor should be cut to length, and terminated with a suitably certified connector. Note that for rack mounted equipment the conductor must be terminated within the rack enclosure grounding system. The supplemental grounding cable must be maintained within the rack system at all times.

Achtung: Der im Lieferumfang dieses Produkts enthaltene Schutzleiter/Erdungsleiter muss von einem qualifizierten Elektriker auf die entsprechende Länge gekürzt werden, sofern von lokalen Bestimmungen und Richtlinien verlangt. Der Schutzleiter sollte auf die korrekte Länge zugeschnitten und mit einem geeigneten zertifizierten Anschluss terminiert werden. Beachten Sie, dass bei Rack montierten Geräten die Leiter innerhalb des Erdungssystems des Rackgehäuses mit einem Abschlusswiderstand versehen werden müssen. Das zusätzliche Erdungskabel muss innerhalb des Rack-Systems stets instandgehalten werden.

注意包装在本产品中的保护接地导体必须由合格的电工按照当地法规要求对长度进行适当的修改。该导体需要被切到适当的长度,并端接在一个通过认证的适当的连接器上。请注意,安装在机架上的设备,其保护接地导体必须端接在机架外壳的接地系统内。辅助接地电缆必须一直保持在机架系统内。

Warning: When installing the unit, always make the ground connection first and disconnect it last. Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Check installation before operation.

Warnung: Beachten Sie, dass bei der Installation des Systems stets zuerst die Erdverbindung angebracht wird und die Erdverbindung stets als letztes getrennt wird. Betreiben Sie die Ausrüstung niemals ohne eine passende, installierte Erdung. Trennen Sie das System nicht von der Erdung. Überprüfen Sie die Erdung vor der Inbetriebnahme.

警告进行设备安装时,必须确保接地连接是最先连接和最后断开。不允许破坏设备的接地导线或是在无接地连接的情况下操作设备,操作前要进行检查。

Warning: Mains Supply – This device is suitable for TN power systems. It cannot be powered by an IT power system. If your supplies are of the IT type, this unit must be powered by 230V (2P + T) via an isolation transformer ratio 1:1, with the secondary connection point labeled Neutral, connected directly to earth (ground).

Warnung: Netzanschluss – Das Gerät ist für TN-Stromversorgungssystem passend. Es kann nicht von einem IT-Stromversorgungssystem betrieben werden. Wenn Ihr Netz ist von IT Typ ist, muss das Gerät von 230V (2P + T) betrieben werden, durch einen Isoliertransformator mit Verhältniswert 1:1, und dessen sekundäre von Neutral gezeichnete Anschlussstelle ist direkt an die Erde geleitet.

警告供电系统——设备适合TN供电系统不能在IT供电系统下操作。如果您使用IT供电系统,设备必须通过230V(2P+T)系统结合1:1的隔离变压器供电,并且二次侧中线必须直接接地。

Warning: Before an ac power cable is either plugged in to or removed from a unit, the ac power source supplying this cable must be switched off.

Warnung: Bevor ein Wechselstromnetzkabel entweder an eine Einheit angeschlossen oder von dieser abgezogen wird, muss die Wechselstromquelle, die dieses Kabel speist, ausgeschaltet werden.

警告在安装、移动电源线之前请切断电源。

Warning: To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.

Warnung: Um die Brandgefahr zu minimieren dürfen ausschließlich Nr. 26 AWG oder Telekommunikationskabel mit größerem Drahtdurchmesser verwendet werden.

警告:为了降低发生火灾的危险请使用NO.26 AWG或更粗的通信线缆。

Warning: No operation can be done on the device and cables during a thunder storm.

Warnung: Wenn die Gefahr eines Blitzeinschlages besteht, darf weder an der Vorrichtung noch an den Kabeln gearbeitet werden.

警告:雷雨风暴期间不要操作设备或者电缆。

Warning: To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone network voltage (TNV) circuits

Warnung: Um den elektrischen Schlag zu vermeiden, schließen Sie den Kreis von Schutzkleinspannung(SELV) nicht an den Kreis von Telefonnetzspannung(TNV) an.

警告为了防止电击危险不要把安全特低电压电路(SELV连接到通信网络电压电路(TNV上。

Caution: To ensure the equipment is mounted on the wall firmly,  please use a screw at least 6 mm diameter and the screw head at least 12 mm diameter.

Achtung: Um das Gerät an der Wand zu befestigen, benutzen Sie Nagel mit einem Mindestdurchmesser von 6 mm. Der Durchmesser der Nagelkappe muss mindestens 12 mm betragen.

注意为确保设备紧固的安装在墙用直径最小是6mm并且螺帽的直径要大于12mm

Warning: When installing the product on the wall you must choose a suitable fixing.

Achtung: Wenn Sie das Produkt an der Wand anbringen, müssen Sie eine passende Befestigungslösung wählen.

警告:将设备安装到墙上时,必须选取合适的固定方式。

Warning: When mounting the product on a wall, do not mount it with ventilation holes facing up or down.

Warnung: Wenn das Produkt an einer Wand montiert wird, installieren Sie ihn nicht mit den Lüftungsöffnungen nach oben oder unten gerichtet.

警告:将设备安装到墙上时,请勿将散热孔朝上或朝下。

Warning: When making connections, be careful not to push the product up and off the wall.

Warnung: Achten Sie darauf, das Produkt nicht nach oben und von der Wand zu schieben, wenn Sie die Anschlüsse vornehmen.

警告:进行连接时,请不要向上推动设备,以免设备从墙上掉落。

Warning: The unit must be permanently connected to the protective ground before operation. The cross-sectional area of the protective earthing / grounding conductor shall be at least 0.75 mm2 or 18 AWG.

Warnung: Diese Anlage muss vor der Inbetriebnahme ständig an den Schutzleiter angeschlossen werden. Die Querschnittsfläche des Schutzerdungsleiters soll mindestens 0.75 mm2 oder 18 AWG betragen.

警告进行设备操作前请确保设备永久接地并且确保接地线截面不小于0.75 mm2 18 AWG

Caution: For DC power supplied equipment, please use 0.75 mm2 or 18 AWG minimum power supply cord.

Achtung: Für mit Gleichstrom betriebene Ausrüstung benutzen Sie bitte eine Zuleitung mit einem Mindestquerschnitt von 0,75 mm2 oder mindestens 18 AWG.

注意 DC电源设备请使用至少 0.75 mm2 18 AWG电缆。

Warning : For DC supplied model: The installation must include a suitable circuit breaker that complies with the local safety regulations. The circuit breaker must be accessible at all times because it serves as the main disconnecting device.

Warnung: Gleichstromgespeistes Modell: Die Installation muss einen passenden Schutzschalter entsprechend den lokalen Sicherheitsbestimmungen aufweisen. Auf den Schutzschalter muss zu jeder Zeit zugegriffen werden können, da dieser die Hauptabschalteinrichtung darstellt.

警告:DC供电,必须按照当地配电法规要求配备合适的空开,并且空开必须随时可用 因为它是主要的切断电源装置。

Caution: When a module is fitted to your equipment, the 2 captive thumbscrews securing the module must be tightened with a suitable tool. Keep the blanking plate and the fixings in a safe place. If you remove the module at any time, you must then replace the blanking plate.

Achtung : Wenn Ihre Anlage mit einem Modul ausgerüstet ist, müssen die 2 Daumenschrauben, die das Modul befestigen, durch ein geeignetes Instrument befestigt werden. Bewahren Sie die Steckscheibe und die Beilagen gut auf. Bei Entfernung des Moduls, müssen Sie die Steckscheibe wieder anbringen.

注意当设备安装模块时必须使用合适的工具把模块上的两个松不脱螺钉拧紧。假面板应妥善保存,如果移除模块,必须立即在原槽位安装假面板。

Caution: Fiber optic ports – optical safety

Achtung : Glasfaseranschlüsse – optische Sicherheit

注意光纤接口 - 光口安全

Never look at the transmit laser while the power is on. Never look directly at the fiber ports and the fiber cable ends when they are powered on.

Schauen Sie niemals in den Laserstrahl, wenn die Einheit eingeschaltet ist. Schauen Sie niemals direkt in die Glasfaseranschlüsse und die Enden des Glasfaserkabels, wenn diese eingeschaltet sind.

当设备工作时,请不要直视光接口和光纤接头。

Caution: Use of controls or adjustments of the performance or procedures other than those specified herein may result in hazardous laser emissions.

Achtung : Werden Steuerelemente, Leistungseinstellungen oder Prozeduren anders als hier angegeben verwendet, kann gefährliche Laserstrahlung auftreten.

注意:不遵守本手册规定而任意改动光模块的功能或性能可能导致激光辐射的危险。

 

Electricity Safety/Elektrische Sicherheit/用电安全

Hazardous Voltage/Gefährliche Spannungen /危险电压

 

·     Conducting articles, such as a watch, hand chain, bracelet or ring should be removed during the installation.

·     Es ist nicht erlaubt während dieser Arbeiten leitende Gegenstände wie Uhren, Armbänder, Armreifen und Ringe am Körper zu tragen.

·     在操作中不能穿戴导电性的物品手表手琏手镯和项链等。

·     Do not use this product near water.

·     Verwenden Sie dieses Produkt nicht in der Nähe von Wasser.

·     请勿在靠近水的地方使用此产品。

 

 


Regulatory compliance standards

Table 2 Regulatory compliance standards

Discipline

Standards

EMC

FCC Part 15 (CFR 47) CLASS A

ICES-003 CLASS A

VCCI-3 CLASS A

VCCI-4 CLASS A

CISPR 22 CLASS A

EN 55022 CLASS A

AS/NZS CISPR22 CLASS A

CISPR 24

EN 55024

EN 61000-3-2

EN 61000-3-3

ETSI EN 300 386

EN 301 489-1

EN 301 489-17

EN 301 489-7

EN 301 489-24

GB 9254

GB 17625.1

YD/T993

Safety

UL 60950-1

CAN/CSA C22.2 No 60950-1

IEC 60950-1

EN 60950-1

AS/NZS 60950-1

FDA 21 CFR  Subchapter J

GB 4943.1

RF

FCC Bulletin OET-65C

FCC part15 subpart C/E

FCC part22

FCC part24

RSS-210

RSS-GEN

RSS-132

RSS-133

EN 300 328

EN 301 893

EN 301 511

EN 301 908-1

EN 301 908-2

EN 50385

EN 62311

 

European Directives compliance

R&TTE Directive

 

This product complies with the European Radio & Telecommunication Terminal Equipment Directive 1999/5/EC.

R&TTE declaration statements:

 

Česky [Czech]

H3C Technologies Co., Limited tímto prohlašuje, že tento Zařízení je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.

Dansk [Danish]

Undertegnede H3C Technologies Co., Limited erklærer herved, at følgende udstyr zařízení overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.

Deutsch [German]

Hiermit erklärt H3C Technologies Co., Limited, dass sich das Gerät Ausrüstung in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

Eesti [Estonian]

Käesolevaga kinnitab H3C Technologies Co., Limited seadmed vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.

English

Hereby, H3C Technologies Co., Limited, declares that this Equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Español [Spanish]

Por medio de la presente H3C Technologies Co., Limited declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.

Ελληνική [Greek]

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ H3C Technologies Co., Limited ΔΗΛΩΝΕΙ ΟΤΙ εξοπλισμός ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.

Français [French]

Par la présente H3C Technologies Co., Limited déclare que l'appareil équipement est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.

Italiano [Italian]

Con la presente H3C Technologies Co., Limited dichiara che questo attrezzatura è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Latviski [Latvian]

Ar šo H3C Technologies Co., Limited deklarē, ka iekārta atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.

Lietuvių [Lithuanian]

Šiuo H3C Technologies Co., Limited deklaruoja, kad šis įranga atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.

Nederlands [Dutch]

Hierbij verklaart H3C Technologies Co., Limited dat het toestel uitrusting in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

Malti [Maltese]

Hawnhekk, H3C Technologies Co., Limited, jiddikjara li dan tagħmir  jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.

Magyar [Hungarian]

Alulírott, H3C Technologies Co., Limited nyilatkozom, hogy a aprīkojums megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Polski [Polish]

Niniejszym H3C Technologies Co., Limited oświadcza, że urządzenie jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.

Português [Portuguese]

H3C Technologies Co., Limited declara que este equipamento está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.

Slovensko [Slovenian]

H3C Technologies Co., Limited izjavlja, da je ta oprema v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.

Slovensky [Slovak]

H3C Technologies Co., Limited týmto vyhlasuje, že zariadenie spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.

Suomi [Finnish]

H3C Technologies Co., Limited vakuuttaa täten että laitteet tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.

Svenska [Swedish]

Härmed intygar H3C Technologies Co., Limited att denna utrustning står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

Íslenska [Icelandic]

Hér með lýsir H3C Technologies Co., Limited yfir því að búnaður er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.

Norsk [Norwegian]

H3C Technologies Co., Limited erklærer herved at utstyret utstyr er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.

Hrvatska [Croatian]

Ovime tvrtka H3C Technologies Co., Limited izjavljuje da je ova oprema usklađena s osnovnim preduvjetima i drugim važnim odredbama direktive 1999/5/EZ.

 

The most up to date copy of the signed EU Declaration of Conformity can be downloaded from:

http://www.h3c.com/portal/Technical_Documents

USA regulatory compliance

FCC Part 15  

This product has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.     This device may not cause harmful interference.

2.     This device must accept any interference received, including interference that may cause undesired operation.

If the customer modifies the equipment without the authorization of H3C, which directly or indirectly contribute to the equipment incompliance with FCC requirements for Class A digital devices, H3C is not liable for such interference problem and the expenses incurred there from shall be covered by the customers.

FDA

This product conforms to the applicable requirements of 21 CFR Subchapter J.

Canada regulatory compliance

ICES-003

This Class A digital apparatus complies with Canadian Standard  ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Japan regulatory compliance

VCCI

This product complies with the requirements of VCCI Class A Information Technology Equipment (ITE).

 

Warning

If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occurs, the user may be required to take corrective actions.

 

この装置は、クラスA 情報技術装置です。この装置を家庭環境で使用すると電波妨害を引き起こすことがあります。この場合には使用者が適切な対策を講ずるよう要求されることがあります。 VCCI-A

EN55022, AS/NZS CISPR 22, CISPR22 compliance

This product complies with the requirements of EN55022,AS/NZS CISPR 22, CISPR22 for Class A Information Technology Equipment (ITE).

 

Warning

If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occurs, the user may be required to take corrective actions.

 


H3C is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006 of the European Parliament and the Council).

Waste Electrical and Electronic Equipment (WEEE) statements

English recycling notice

 

 

Bulgarian recycling notice

 

 

Czech recycling notice

 

 

Danish recycling notice

 

 

Dutch recycling notice

 

 

Estonian recycling notice

 

 

Finnish recycling notice

 

 

French recycling notice

 

 

German recycling notice

 

 

Greek recycling notice

 

 

Hungarian recycling notice

 

 

Italian recycling notice

 

 

Latvian recycling notice

 

 

Lithuanian recycling notice

 

 

Polish recycling notice

 

 

Portuguese recycling notice

 

 

Romanian recycling notice

 

 

Slovak recycling notice

 

 

Spanish recycling notice

 

 

Swedish recycling notice

 

 

RoHS material content declarations

Turkey RoHS material content declaration

Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur

Ukraine RoHS material content declaration

Обладнання відповідає вимогам Технічного регламенту щодо обмеження використання деяких

небезпечних речовин в електричному та електронному обладнанні, затвердженого постановою

Кабінету Міністрів України від 3 грудня 2008 № 1057

India RoHS material content declaration

This product complies with the "India E-waste (Management and Handling) Rule 2011" and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.

Perchlorate material Special handling may apply

Perchlorate material - special handling may apply.

See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/.

This product’s real-time clock battery or coin cell battery may contain perchlorate and may require special handling when recycled or disposed of in California.

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网