|04-Wireless Custom View Management.rar||2.11 MB|
- Table of Contents
To view the video, click download link.
Software Version Used
This video was recorded based on the following versions:
iMC: iMC PLAT 3.20-R2602P08, iMC WSM 3.50-F5201P01
The operator can add an AC and the Fit APs connected to the AC to a wireless custom view, facilitating locating the desired devices.
A wireless custom view is composed of an AC and the Fit APs connected to the AC. The AC and Fit APs can belong to several views at the same time.
A WLAN where several Fit APs are connected to an AC operates normally.
Recommended Configuration Flow
Step1 Check that the AC and connected fit APs are managed by the iMC.
Step2 Create a wireless custom view and add the AC and connected Fit APs to the view.