|03-Location View Management.rar||3.52 MB|
- Table of Contents
To view the video, click download link.
Software Version Used
This video was recorded based on the following versions:
iMC: iMC PLAT 3.20-R2602P08, iMC WSM 3.50-F5201P01
A location view displays the APs in a specific area. You can mark the physical location of each AP in a location topology to facilitate management.
This configuration case shows the main management functions of a location view in WSM by adding a location view in the WSM, adding the APs to the location view, and viewing the location topology.
A WLAN with several online Fit APs and Fat APs is operating normally; one floor map.
Recommended Configuration Flow
Step1 Add a location view
Step2 Add APs to the location view
Step3 Add a background picture, and adjust the positions of APs
Step4 View AP signal coverage
Step5 Lock AP locations and save location topology
Step6 Locate APs through location topology