|iMC VPD Configuration Video.rar||12.71 MB|
- Table of Contents
The H3C Visual Panel Designer (VPD) allows you to customize the device panel information displayed on iMC. The H3C VPD provides a WYSIWYG user interface, through which you can visually configure vendor, model, and physical entity information (including the type and status of chassis, modules, ports, power supply, fans, and other components) for devices. You can easily customize the device panel information by dragging pictures and setting properties.
You can flexibly define entity statuses, compile third-party MIB files, and configure third-party MIB SNMP information to customize the device panel information as needed.
This video illustrates how to use the VPD to customize the device panel information of a ProCurve J9019A switch 2900-24, an H3C IRF virtual device, and a Cisco Catalyst 4507R.
1) This video was recorded based on the following versions: iMC VPD 3.20-R2601 and iMC PLAT 3.20-R2606P13. Web interfaces of different versions may vary.
2) To view the video, click the download link.
Copyright ©2010 Hangzhou H3C Technologies Co., Ltd. All rights reserved.
No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Hangzhou H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.