- Released At: 31-10-2021
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
LSXM1TGS48TE2 48-port 10GBASE SFP+ Ethernet optical interface module
1 Identifier
The module identifier LSXM1TGS48TE2 is in the upper right corner of the front panel.
2 Specifications
Table 1 Module specifications
Item |
Specification |
Processor |
Intel Processor (Quad-Core) @ 2.2 GHz |
SDRAM |
8 GB |
Power consumption |
130 W to 220 W |
Ports |
48 × 10GE SFP+ ports |
Port transmission rate |
10/1 Gbps |
IMPORTANT: · This module can be used only with Type T fabric modules (such as LSXM1SFT08F2) and Type T supervisor engine units (such as LSXM2SUPT2). · To verify the compatibility of the module with the software release you are using, see the release notes. · For information about transceiver modules and cables available for the module, see the cards and transceiver modules compatibility matrixes for the device. · To use this module, install switching fabric modules preferably in the four switching fabric module slots with the smallest slot IDs. The module fails to start up if no switching fabric module is installed in the four slots. |
3 Related documentation
For information about module installation, see the installation guide for the device.
For software upgrade, see the release notes.
Copyright © 2020-2021 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.