- Released At: 31-10-2021
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
LSXM1TGS48TD2 48-port 10GBASE SFP+ Ethernet optical interface module
1 Identifier
The module identifier LSXM1TGS48TD2 is on the right corner of the front panel.
2 Specifications
Table 1 Module specifications
Item |
Specification |
Processor |
Intel Processor (Quad-Core) @ 2.2 GHz |
SDRAM |
4 GB |
Power consumption |
93 W to 179 W |
Ports |
48 × SFP+ ports |
Port transmission rate |
10 Gbps、1 Gbps |
IMPORTANT: · This module can be used only with Type T fabric modules (such as LSXM1SFT08F2) and Type T supervisor engine units (such as LSXM2SUPT2). · To verify the compatibility of the module with the software release you are using, see the release notes. · For information about transceiver modules and cables available for the module, see the cards and transceiver modules compatibility matrixes for the device. |
3 Related documentation
For information about module installation, see the installation guide for the device.
For software upgrade, see the release notes.
Copyright © 2020-2021 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.