Fundamentals Command Reference

Covers the commands for logging in to and setting up an SR8800 router. This command reference includes:

·      CLI

·      Login Management

·      FTP and TFTP

·      File Management

·      Configuration File Management

·      Software Upgrade

·      Device Management

Interface Command Reference

Covers the interface configuration command. This command reference includes:

·      Ethernet Interface

·      WAN Interface

·      POS Interface

·      CPOS Interface

·      E-CPOS Interface

·      Loopback and Null Interface

Layer 2—LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. This command reference includes:

·      VLAN

·      MAC Address Table

·      Spanning Tree

·      Ethernet Link Aggregation

·      Port Isolation

·      QinQ

·      BPDU Tunneling

·      GVRP

·      VLAN Termination

·      LLDP

Layer 2—WAN Command Reference

Covers WAN access configuration commands. This command reference includes:

·      ATM

·      PPP

·      HDLC

·      Frame Relay

·      Modem Management

Layer 3—IP Services Command Reference

Covers the commands for configuring and managing Layer 3 – IP services, including ARP, IPv4 and IPv6 addresses, DHCP and DHCPv6, DNS, NAT, NAT-PT, UDP helper, and tunneling. This command reference includes:

·      ARP

·      IP Addressing

·      DHCP

·      DNS

·      NAT

·      IP Performance Optimization

·      Adjacency Table

·      UDP Helper

·      IPv6 Basics

·      DHCPv6

·      IPv6 DNS

·      NAT-PT

·      Tunneling

·      GRE

Layer 3—IP Routing Command Reference

Covers the commands for configuring routes for IPv4 and IPv6 networks, and routing policies. This command reference includes:

·      Basic IP Routing

·      Static Routing

·      RIP

·      OSPF

·      IS-IS

·      BGP

·      Policy-Based Routing

·      IPv6 Static Routing

·      RIPng

·      OSPFv3

·      IPv6 IS-IS

·      IPv6 BGP

·      IPv6 Policy-Based Routing

·      Routing Policy

IP Multicast Command Reference

Covers the commands for Layer 3 IPv4 multicast protocols IGMP, PIM, MBGP, and Layer 3 IPv6 multicast protocols MLD, IPv6 PIM, MSDP, and IPv6 MBGP), Layer 2 IPv4 multicast protocols (IGMP snooping, and multicast VLAN), and Layer 2 IPv6 multicast protocols (MLD snooping and IPv6 multicast VLAN). This command reference includes:

·      IGMP Snooping

·      PIM Snooping

·      Multicast VLAN

·      Multicast Routing and Forwarding

·      IGMP

·      PIM

·      MSDP

·      MBGP

·      Multicast VPN

·      MLD Snooping

·      IPv6 PIM Snooping

·      IPv6 Multicast VLAN

·      IPv6 Multicast Routing and Forwarding

·      MLD

·      IPv6 PIM

·      IPv6 MBGP

MPLS Command Reference

This command reference includes:

·      MPLS Basics

·      MPLS TE

·      VPLS

·      MPLS L2VPN

·      MPLS L3VPN

ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS or hierarchical QoS (HQoS) technologies to improve network performance and network use efficiency. This command reference includes:

·      ACL

·      QoS

·      FR QoS

·      HQoS

Security Command Reference

Covers security feature commands. Available security features include identity authentication (AAA), access security (802.1X, MAC authentication, and portal), secure management (password control, public key, SSH, and firewall), SSL, and attack protection (IP source guard, ARP attack protection, and URPF). This command reference includes:

·      AAA

·      802.1X

·      MAC Authentication

·      Portal

·      Password Control

·      Public Key

·      IPsec

·      SSH

·      Packet-Filter Firewall

·      ALG

·      Session Management

·      TCP and ICMP Attack Protection

·      IP Source Guard

·      ARP Attack Protection

·      URPF

·      COPS

·      FIPS

·      PKI

High Availability Command Reference

Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery. This command reference includes:

·      Active and Standby Switchover

·      Ethernet OAM

·      RPR

·      VRRP

·      BFD

·      Track

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity. This command reference includes:

·      System Maintenance and Debugging

·      NQA

·      NTP

·      Clock Monitoring

·      IPC

·      SNMP

·      RMON

·      Sampler

·      Mirroring

·      NetStream

·      IPv6 NetStream

·      Protocol Packet Statistics

·      Information Center

·      Flow Logging

OAA Command Reference

Covers the commands for OAP module, ACSEI, and ACFP. This command reference includes:

·      OAP Module

·      ACSEI

·      ACFP