Login
- Released At: 18-11-2019
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
24-port 10/100/1000BASE-T electrical Ethernet interface + 4-port 10GBASE-R-SFP+ optical Ethernet interface card—LSQM2GT24TSSC0
1 Card identifier
The card identifier LSQM2GT24TSSC0 is in the upper right corner of the front panel.
2 Specifications
|
|
IMPORTANT: Before installing the card, you must remove the protection cover from the card to ensure correct installation. |
Table 1 Card specifications
|
Item |
Specifications |
|
Card size (H × W × D) |
40 × 399 × 355 mm (1.57 × 15.71 × 13.98 in) |
|
SDRAM (DDR3) |
1GB |
|
Power consumption |
32 W to 43 W |
|
Ports |
· 24 × 10/100/1000BASE-T copper ports · 4 x 10GBASE-R-SFP+ fiber ports |
|
Connector type |
· RJ-45 · LC |
|
Port speed |
· 10/100/1000 Mbps · 10 Gbps |
|
Transmission medium and max transmission distance |
· 10/100/1000BASE-T copper port: 100 m (328.08 ft) over Category 5 or higher twisted pair cables · 10GBASE-R-SFP+ fiber port: see Table 3, Table 4, and Table 5 |
|
Applicable hardware platforms |
· All S7500E models · All S7500X models |
|
Applicable host software versions |
Release 7150 and Later |
The 10/100/1000BASE-T copper port uses an RJ-45 connector.
Figure 1 RJ-45 connector
Table 2 RJ-45 GE connector pin assignment
|
Pin |
10BASE-T/100BASE-TX/1000BASE-T |
|
|
Signal |
Function |
|
|
1 |
MX_0+ |
Transmits and receives data |
|
2 |
MX_0- |
Transmits and receives data |
|
3 |
MX_1+ |
Transmits and receives data |
|
4 |
MX_2+ |
Transmits and receives data |
|
5 |
MX_2- |
Transmits and receives data |
|
6 |
MX_1- |
Transmits and receives data |
|
7 |
MX_3+ |
Transmits and receives data |
|
8 |
MX_3- |
Transmits and receives data |
Table 3 describes the SFP transceiver modules available for the SFP+ ports on the card.
Table 3 SFP transceiver module specifications
|
Module |
Central wavelength |
Connector type |
Cable specifications |
Maximum transmission distance |
|
850 nm |
LC |
50/125 μm multi-mode optical fiber |
550 m (0.34 miles) |
|
|
850 nm |
LC |
62.5/125 μm multi-mode optical fiber |
275 m (0.17 miles) |
|
|
SFP-GE-SX-MM850-D |
850 nm |
LC |
50/125 μm multi-mode optical fiber |
550 m (0.34 miles) |
|
850 nm |
LC |
62.5/125 μm multi-mode optical fiber |
275 m (0.17 miles) |
|
|
SFP-GE-LX-SM1310-A |
1310 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
1310 nm |
LC |
50/125 μm multi-mode optical fiber |
550 m (1804.46 ft) |
|
|
1310 nm |
LC |
62.5/125 μm multi-mode optical fiber |
550 m (1804.46 ft) |
|
|
SFP-GE-LX-SM1310-D |
1310 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
1310 nm |
LC |
50/125 μm multi-mode optical fiber |
550 m (1804.46 ft) |
|
|
1310 nm |
LC |
62.5/125 μm multi-mode optical fiber |
550 m (1804.46 ft) |
|
|
SFP-GE-LH40-SM1310 |
1310 nm |
LC |
9/125 μm single-mode optical fiber |
40 km (24.86 miles) |
|
SFP-GE-LH40-SM1310-D |
1310nm |
LC |
9/125 μm single-mode optical fiber |
40 km (24.86 miles) |
|
SFP-GE-LH40-SM1550 |
1550 nm |
LC |
9/125 μm single-mode optical fiber |
40 km (24.86 miles) |
|
SFP-GE-LH80-SM1550 |
1550 nm |
LC |
9/125 μm single-mode optical fiber |
80 km (49.71 miles) |
|
SFP-GE-LH80-SM1550-D |
1550 nm |
LC |
9/125 μm single-mode optical fiber |
80 km (49.71 miles) |
|
SFP-GE-LH100-SM1550 |
1550 nm |
LC |
9/125 μm single-mode optical fiber |
100 km (62.14 miles) |
|
SFP-GE-LX-SM1310-BIDI |
RX: 1490 nm TX: 1310 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
SFP-GE-LX-SM1490-BIDI |
RX: 1310 nm TX: 1490 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
|
NOTE: · BIDI modules use different central wavelengths in transmit and receive directions, in order to implement bidirectional transmission of optical signals over the same fiber. · BIDI modules must be used in pairs. For example, if an SFP-GE-LX-SM1310-BIDI is used at one end, an SFP-GE-LX-SM1490-BIDI must be used at the other end. |
Table 4 describes the SFP+ transceiver modules available for the SFP+ ports on the card.
Table 4 SFP+ transceiver module specifications
|
Module |
Central wavelength |
Connector type |
Cable specifications |
Maximum transmission distance |
|
SFP-XG-SX-MM850-A |
850 nm |
LC |
50/125 μm multi-mode optical fiber |
300 m (984.25 ft) |
|
850 nm |
LC |
62.5/125 μm multi-mode optical fiber |
33 m (108.27 ft) |
|
|
SFP-XG-SX-MM850-D |
850 nm |
LC |
50/125 μm multi-mode optical fiber |
300 m (984.25 ft) |
|
850 nm |
LC |
62.5/125 μm multi-mode optical fiber |
33 m (108.27 ft) |
|
|
SFP-XG-SX-MM850-E |
850 nm |
LC |
50/125 μm multi-mode optical fiber |
300 m (984.25 ft) |
|
850 nm |
LC |
62.5/125 μm multi-mode optical fiber |
33 m (108.27 ft) |
|
|
SFP-XG-SX-MM850-F1 |
850 nm |
LC |
50/125 μm multi-mode optical fiber |
300 m (984.25 ft) |
|
850 nm |
LC |
50/125 μm multi-mode optical fiber |
82 m (269.03 ft) |
|
|
850 nm |
LC |
50/125 μm multi-mode optical fiber |
66 m (216.54 ft) |
|
|
850 nm |
LC |
62.5/125 μm multi-mode optical fiber |
33 m (108.27 ft) |
|
|
850 nm |
LC |
62.5/125 μm multi-mode optical fiber |
26 m (85.30 ft) |
|
|
SFP-XG-LX-SM1310 |
1310 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
SFP-XG-LX-SM1310-D |
1310 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
SFP-XG-LX-SM1310-E |
1310 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
SFP-XG-LH40-SM1550 |
1550nm |
LC |
9/125 μm single-mode optical fiber |
40 km (24.86 miles) |
|
SFP-XG-LH40-SM1550-D |
1550nm |
LC |
9/125 μm single-mode optical fiber |
40 km (24.86 miles) |
|
SFP-XG-LH80-SM1550 |
1550nm |
LC |
9/125 μm single-mode optical fiber |
80 km (49.71 miles) |
|
SFP-XG-LH80-SM1550-D |
1550nm |
LC |
9/125 μm single-mode optical fiber |
80 km (49.71 miles) |
Table 5 describes the SFP+ DAC cables available for the SFP+ ports on the card.
Table 5 SFP+ DAC cable specifications
|
SFP+ DAC cable |
Cable length |
Data rate |
Cable type |
Remark |
|
LSWM1STK |
0.65 m (2.13 ft) |
10.31 Gbps |
SFP+ cable |
Use for connecting SFP+ ports |
|
LSWM2STK |
1.2 m (3.94 ft) |
|||
|
LSWM3STK |
3 m (9.84 ft) |
3 Related documentation
For information about card installation, see H3C S7500E Switch Series Installation Guide and H3C S7500X Switch Series Installation Guide.
For software upgrade, see the release notes for the device.
Copyright © 2014-2018 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.
