- Released At: 30-07-2021
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
About the H3C S5560X-EI & S5500V2-EI & MS4520V2-30F command references
The command references are applicable to the following switches and software versions:
Hardware |
Software versions |
H3C S5560X-EI switch series |
Release 6308 and later |
H3C S5500V2-EI switch series |
Release 6308 and later |
H3C MS4520V2-30F switch |
Release 6308 and later |
The command references describe the commands and command syntax options available for the switch.
Command reference |
Content |
Fundamentals Command Reference |
Covers the commands for logging in to and setting up the switch. This command reference includes: · Basic CLI. · RBAC. · Login management. · FTP and TFTP. · File system management. · Configuration file management. · Software upgrade. · ISSU. · Device management. · Tcl. · Python. · License management. |
Virtual Technologies Command Reference |
Covers the commands for configuring the Intelligent Resilient Framework (IRF) technology features and the IRF 3.1 technology features. |
Layer 2—LAN Switching Command Reference |
Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. This command reference includes: · Ethernet interface. · Loopback, null, and inloopback interfaces. · Bulk interface configuration. · MAC address table and MAC Information. · Ethernet link aggregation. · DRNI. · Port isolation. · Spanning tree. · Loop detection. · VLAN (including VLAN, private VLAN, super VLAN, and voice VLAN). · MVRP. · QinQ. · VLAN mapping. · LLDP. · L2PT. · PPPoE relay. |
Layer 3—IP Services Command Reference |
Covers the commands for configuring IP addressing, IP performance optimization, ARP, IP forwarding basic, DHCP, DNS, UDP helper, IPv6 basics, and DHCPv6 server. This command reference includes: · ARP (including gratuitous ARP, proxy ARP, ARP snooping, and ARP direct route advertisement). · DNS (including DDNS). · mDNS relay. · IP forwarding basics (including basic IP forwarding and load sharing). · Fast forwarding. · IRDP. · IP performance optimization. · UDP helper. · IPv6 fast forwarding. · Adjacency table. · GRE. · HTTP redirect. · Tunneling. |
Layer 3—IP Routing Command Reference |
Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes. This command reference includes: · Basic IP routing. · Static routing. · RIP. · OSPF. · IS-IS. · BGP. · Policy-based routing. · IPv6 static routing. · RIPng. · OSPFv3. · IPv6 policy-based routing. · Routing policy. |
IP Multicast Command Reference |
Covers the commands for Layer 2 IPv4 multicast protocols (including IGMP snooping and multicast VLAN), Layer 3 IPv4 multicast protocols (including IGMP and PIM), Layer 2 IPv6 multicast protocols (including MLD snooping), and Layer 3 IPv6 multicast protocols (including MSDP). This command reference includes: · IGMP snooping. · PIM snooping. · Multicast VLAN. · Multicast routing and forwarding. · IGMP. · PIM. · MSDP. · MLD snooping. · IPv6 PIM snooping. · IPv6 multicast VLAN. · IPv6 multicast routing and forwarding. · MLD. · IPv6 PIM. |
MCE Command Reference |
Covers the commands for configuring MCE. |
ACL and QoS Command Reference |
Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes: · ACL. · QoS (including QoS policy, priority mapping, GTS and rate limit, congestion management, and aggregate CAR). · Data buffer. · Time range. |
Security Command Reference |
Covers security feature commands. Available security features include identity authentication, secure management, and attack protection. This command reference includes: · AAA. · 802.1X. · MAC authentication. · Portal. · Web authentication. · Port security. · User profile. · Password control. · Keychain. · PKI. · IPsec, IKE, and IKEv2. · SSH. · SSL. · Attack detection and prevention. · TCP attack prevention. · IP source guard. · ARP attack protection. · ND attack defense. · uRPF. · SAVI. · MFF. · FIPS. · MACsec. · 802.1X client. |
High Availability Command Reference |
Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery. This command reference includes: · Ethernet OAM. · CFD. · DLDP. · RRPP. · ERPS. · Smart Link. · Monitor Link. · VRRP. · BFD. · Track. |
Network Management and Monitoring Command Reference |
Covers the commands that help you manage and monitor your network, for example, manage system events, and test network connectivity. This command reference includes: · System maintenance and debugging (ping, tracert, and system debugging). · NTP (including SNTP). · PoE. · RMON. · Event MIB. · NETCONF. · SmartMC. · EPA. · CWMP. · EAA. · Process monitoring and maintenance. · Mirroring (including both port and flow mirroring). · sFlow. · Information center. · Packet capture. · VCF fabric. · Cloud connection. · Ansible. · Chef. · Puppet. · EPS agent. |
Telemetry Command Reference |
Covers the commands for configuring gRPC. |
OpenFlow Command Reference |
Covers the commands for configuring OpenFlow. |
VXLAN Command Reference |
Covers the commands for configuring VXLAN. |
EVPN Command Reference |
Covers the commands for configuring EVPN. |