- Released At: 01-09-2020
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
LSXM2CGQ18QGHB2 18-port 100G QSFP28/36-port 40G QSFP+ Ethernet fiber interface card
1 Identifier
The card identifier LSXM2CGQ18QGHB2 is at the upper right corner of the front panel.
2 Specifications
CAUTION: This card can be used only with Type H switching fabric modules, which have a character string of SFH in their card identifiers (for example, LSXM1SFH16C1). Card damage will occur if this card is used with a switching fabric module that is not Type H. |
|
NOTE: Switching fabric module slots are covered by fan trays. To verify the card identifiers of the switching fabric modules when the switch is operating, use the display device command. |
Figure 1 Interface types and numbers
(1) QSFP+ ports |
(2) QSFP28 ports |
Table 1 Card specifications
Item |
Specification |
Processor |
Intel processor (Quad Core) @ 2.4 GHz |
SDRAM |
8 GB DDR4 SDRAM |
Power consumption |
256 W to 525 W |
Interfaces |
18 × 100G QSFP28 ports + 18 × 40G QSFP+ ports Or 36 × 40G QSFP+ ports NOTE: A QSFP28 port acts as a QSFP+ port when operating at 40 Gbps. |
Transmission rate |
100/40 Gbps |
Compatible device models |
· S12500X-AF Switch Series · S12500F-AF Switch Series |
Compatible switching fabric modules |
Type H switching fabric modules |
IMPORTANT: · To verify compatibility of the card with the software release you are using, see the release notes. · For information about transceiver modules and cables available for the card, see H3C S12500X-AF Switch Series Cards and Transceiver Modules Compatibility Matrixes and H3C S12500F-AF Switch Series Cards and Transceiver Modules Compatibility Matrixes. |
3 Related documentation
For card installation, see H3C S12500X-AF Switch Series Installation Guide and H3C S12500F-AF Switch Series Installation Guide.
For software upgrade, see the release notes for the device.
Copyright © 2019 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.