Login
- Released At: 06-06-2020
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
LSXM1TGS48C2HB1 48-port 10G SFP+ + 2-port 100G QSFP28 fiber interface card
1 Identifier
The card identifier LSXM1TGS48C2HB1 is at the upper right corner of the front panel.
2 Specifications
Figure 1 Interface types and numbers
|
(1) QSFP28 ports |
(2) QSFP+ ports |
Table 1 Card specifications
|
Item |
Specification |
|
Processor |
MIPS64 (Dual Core) @ 1.2 GHz |
|
SDRAM |
8 GB DDR3 SDRAM |
|
Power consumption |
163 W to 275 W |
|
Interfaces |
· 48 × 10G SFP+ port · 2 × 100G QSFP28 port |
|
Transmission rate |
· SFP+ port: 10 Gbps · QSFP28 port: 100/40 Gbps |
|
Compatible device models |
S12500X-AF Switch Series |
|
Compatible switching fabric modules |
Type H switching fabric modules |
|
|
CAUTION: This card can be used only with Type H switching fabric modules, which have a character string of SFH in their card identifiers (for example, LSXM1SFH16C1). Card damage will occur if this card is used with a switching fabric module that is not Type H. |
|
|
NOTE: Switching fabric module slots are covered by fan trays. To verify the card identifiers of the switching fabric modules while the switch is operating, use the display device command. |
|
|
IMPORTANT: · To verify compatibility of the card with the software release you are using, see the release notes. · For the card to start up correctly, make sure the three switching fabric module slots with the greatest slot IDs take precedence over other slots for module installation. · For information about transceiver modules and cables available for the card, see H3C S12500X-AF Switch Series Cards and Transceiver Modules Compatibility Matrixes. · If high-performance DDR memory is installed on the module (labelled with this installation information), see the release notes to verify the device software compatibility with the memory. |
3 Related documentation
For card installation, see H3C S12500X-AF Switch Series Installation Guide.
For software upgrade, see the release notes for the device.
Copyright © 2020 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.
