- Released At: 16-04-2021
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
LSXM1CGQ48KBR1 48-port 100G QSFP28 Ethernet optical interface module
1 Identifier
The module identifier LSXM1CGQ48KBR1 is in the upper right corner of the front panel.
2 Specifications
|
CAUTION: This module can be used only with Type K fabric modules, which have a character string of SFK in their module identifiers (LSXM1SFK08FR1 for example). Module damage will occur if this module is used with a fabric module that is not Type K. |
|
NOTE: Fabric module slots are covered by fan trays. To verify the module identifiers of the fabric modules when the device is operating, use the display device command. |
Figure 1 Interface types and numbers
(1) QSFP28 ports |
Table 1 Module specifications
Item |
Specification |
Processor |
Intel processor (Quad-Core) @ 2.2 GHz |
SDRAM |
16 GB DDR4 SDRAM |
Power consumption |
395 W to 765 W |
Ports |
48 × 100GE QSFP28 ports |
Transmission rate |
100 Gbps. |
Compatible device models |
· S12516R switch router (configured with high performance fan trays) · S12508R switch router (configured with high performance fan trays) · S12504R switch router (configured with high performance fan trays) · S12500R-2L switch router · S12516CR switch router · S12508CR switch router |
Compatible fabric modules |
Type K fabric modules |
|
IMPORTANT: · To verify compatibility of the module with the software release you are using, see the release notes. · For information about transceiver modules and cables available for the module, see H3C S12500R Switch Router Series Cards and Transceiver Modules Compatibility Matrixes. |
3 Related documentation
For module installation, see H3C S12500R Switch Router Series Installation Guide, H3C S12500CR Switch Router Series Installation Guide, and H3C S12500R-2L Switch Router Installation Guide.
For software upgrade, see the release notes for the device.
Copyright © 2021 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.