00-About the Command References

HomeSupportSwitchesS10500X SeriesReference GuidesCommand ReferencesH3C S10500X Switch Series Command References-Release758X-6W10000-About the Command References
Download Book
  • Released At: 05-06-2020
  • Page Views:
  • Downloads:
Table of Contents
Related Documents

About the H3C S10500X command references

The command references describe the commands and command syntax options available for the H3C S10500X switch series.

 

Command reference

Content

Fundamentals Command Reference

Covers the commands for logging in to and setting up the switch. This command reference includes:

·          CLI

·          RBAC

·          Login management

·          FTP and TFTP

·          File system management

·          Configuration file management

·          Software upgrade

·          ISSU

·          Emergency shell

·          Preprovisioning

·          Device management

·          Tcl

·          Python

·          License management

Virtual Technologies Command Reference

Covers the commands for configuring virtual technologies features. This command reference includes:

·          IRF

·          MDC

Interface Command Reference

Covers the commands for configuring interfaces. This command reference includes:

·          Bulk interface

·          Ethernet interface

·          Loopback, null, and inloopback interface

Layer 2—LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. You can use these commands to divide broadcast domains, remove Layer 2 loops, isolate users within a VLAN, customer network packets transparent to the service provider network, remark VLAN tags, and so on. This command reference includes:

·          MAC address table

·          Ethernet link aggregation

·          DRNI

·          Port isolation

·          VLAN

·          MVRP

·          QinQ

·          VLAN mapping

·          Loop detection

·          Spanning tree

·          LLDP

·          L2PT

·          Service loopback group

Layer 3—IP Services Command Reference

Covers the commands for configuring IP services features. You can use these command to configure IP addressing, IP performance optimization, ARP, DNS, UDP helper, and interoperation between IPv4 and IPv6. This command reference includes:

·          ARP

·          IP addressing

·          DHCP

·          DNS

·          mDNS relay

·          IP forwarding basics

·          Fast forwarding

·          Adjacency table

·          IRDP

·          IP performance optimization

·          UDP helper

·          IPv6 basics

·          DHCPv6

·          IPv6 fast forwarding

·          Tunneling

·          GRE

·          HTTP redirect

Layer 3—IP Routing Command Reference

Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing. This command reference includes:

·          Basic IP routing

·          Static routing

·          RIP

·          OSPF

·          IS-IS

·          BGP

·          Policy-based routing

·          IPv6 static routing

·          RIPng

·          OSPFv3

·          IPv6 policy-based routing

·          Routing policy

·          DCN

IP Multicast Command Reference

Covers the commands for Layer 2 and Layer 3 multicast protocols. This command reference includes:

·          IGMP snooping

·          PIM snooping

·          Multicast VLAN

·          Multicast routing and forwarding

·          IGMP

·          PIM

·          MSDP

·          Multicast VPN

·          MLD snooping

·          IPv6 PIM snooping

·          IPv6 multicast VLAN

·          IPv6 multicast routing and forwarding

·          MLD

·          IPv6 PIM

MPLS Command Reference

Covers the commands for configuring MPLS features, including basic MPLS, LDP, MPLS TE, and MPLS label-based L2VPN and L3VPN. This command reference includes:

·          Basic MPLS

·          Static LSP

·          LDP

·          MPLS TE

·          Static CRLSP

·          RSVP

·          Tunnel policy

·          MPLS L3VPN

·          MPLS L2VPN

·          VPLS

·          MPLS OAM

·          MCE

ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes:

·          ACL

·          QoS

·          Time range

·          Data buffer

Security Command Reference

Covers security feature commands. Available security features include identity authentication, access security, secure management, and attack protection. This command reference includes:

·          AAA

·          802.1X

·          MAC authentication

·          Portal

·          Port security

·          Password control

·          Keychain

·          Public key management

·          PKI

·          IPsec, IKE, and IKEv2

·          SSH

·          SSL

·          Attack detection and prevention

·          TCP attack prevention

·          IP source guard

·          ARP attack protection

·          ND attack defense

·          uRPF

·          MFF

·          FIPS

·          MACsec

·          802.1X client

·          Web authentication

·          Object group

High Availability Command Reference

Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery. This command reference includes:

·          Ethernet OAM

·          CFD

·          DLDP

·          RRPP

·          ERPS

·          Smart Link

·          Monitor Link

·          VRRP

·          Reth interface

·          BFD

·          Track

·          Process placement

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, manage system events, and test network connectivity. This command reference includes:

·          System maintenance and debugging

·          NQA

·          NTP

·          SNMP

·          RMON

·          NETCONF

·          EAA

·          Process monitoring and maintenance

·          Sampler

·          Mirroring

·          NetStream

·          IPv6 NetStream

·          sFlow

·          Information center

·          GOLD

·          Packet capture

·          VCF fabric

·          CWMP

·          SmartMC

Telemetry Command Reference

Covers the commands for configuring Telemetry.

OAA Command Reference

Covers the commands for configuring OAA. This command reference includes:

·          OAP manager

·          OAP module

FCoE Command Reference

Covers the commands for configuring FCoE.

TRILL Command Reference

Covers the commands for configuring TRILL.

EVB Command Reference

Covers the commands for configuring EVB.

OpenFlow Command Reference

Covers the commands for configuring OpenFlow.

VXLAN Command Reference

Covers the commands for configuring VXLAN.

EVPN Command Reference

Covers the commands for configuring EVPN.

 

 

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网