- Released At: 18-11-2019
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
Switching fabric module—LSUM1FAB08XE0
1 Identifier
The module identifier LSUM1FAB08XE0 is in the upper right corner of the front panel.
2 Specifications
Table 1 Module specifications
Item |
Specifications |
BootROM |
8 MB |
SDRAM |
2 GB |
Card size (H × W × D) |
40 × 433 × 318 mm (1.57 × 17.05 × 12.52 in) |
Power consumption |
123W to 183W |
Connector type |
RJ-45 |
Ports |
1 console port CAUTION: The port is intended for maintenance and upgrade by H3C technical support engineers. H3C recommends not using it. If the device fails because you operate the port without authorization, H3C shall not be held liable for any consequence caused thereby. |
Compatible device models |
S10508X、S10508X-V |
Software version |
Version 7556 and Later |
3 Related documentation
For module installation, see H3C S10500X Switch Series Installation Guide.
For software upgrade, see the release notes for the device.
Copyright © 2017-2018 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.