00-About the H3C Command References

HomeSupportResource CenterH3C Anchor Command Reference-6W10000-About the H3C Command References
Download Book
Title Size Downloads
00-About the H3C Command References-book.rar 5.11 MB
Table of Contents
Related Documents

About the H3C Anchor command references

The H3C Anchor command references describe the commands and command syntax options for H3C Anchor.

 

Command reference

Content

Fundamentals Command Reference

Covers the commands for logging in to and setting up the device. This command reference includes:

·     CLI (CLI overview and advanced CLI configuration)

·     FTP and TFTP

·     RBAC

·     File system management

·     Login management (CLI login and user configuration and management)

·     Software upgrade

·     Configuration file management

System Management Command Reference

Covers the commands for managing the device and logs by using device management, information center, and NTP features. This command reference includes:

·     NTP

·     Information center

·     Device management

Interface Command Reference

Covers the commands for configuring Ethernet interfaces, PoE, loopback interfaces, null interfaces, inloopback interfaces, and bulk interface settings. This command reference includes:

·     Loopback, null, and inloopback interface

·     Ethernet interface

·     Bulk interface configuration

Network Connectivity Command Reference

Covers the commands for configuring network connectivity-related Layer 2 and Layer 3 features. This command reference includes:

·     About the network connectivity configuration guide

·     MAC address table

·     Ethernet link aggregation

·     VLAN

·     Port isolation

·     Loop detection

·     Spanning tree

·     LLDP

·     Layer 2 forwarding

·     ARP

·     IP addressing

·     DHCP

·     DHCPv6

·     DNS

·     IP performance optimization

·     IPv6 basics

·     IP routing basics

·     IP forwarding basics

·     Static routing

·     IPv6 static routing

·     Multicast overview

·     IGMP snooping

·     MLD snooping

WLAN Access Command Reference

Covers the commands for configuring WLAN access. This command reference includes:

WLAN access

AP and WT Management Command Reference

Covers the commands for configuring centralized management of fit APs and in an Anchor AC+fit AP network. This command reference includes:

·     Anchor AP

·     AP management

WLAN Security Command Reference

Covers the commands for configuring WLAN security, WAPI, PMM, DPI, and WIPS features, and reporting user application and URL session information to the server. This command reference includes:

·     WLAN security

·     WIPS

Radio Resources Management Command Reference

Covers the commands for managing radio channel, power, rate, and load balancing, and measuring link quality and WLAN performance. This command reference includes:

·     Radio management

·     WLAN radio load balancing

·     WLAN load balancing

·     WLAN radio resource measurement

·     Band navigation

·     WLAN RRM

·     Channel scanning

·     Spectrum management

WLAN Roaming Command Reference

Covers the commands for configuring wireless client roaming and fast roaming. This command reference includes:

·     WLAN roaming

·     WLAN roaming center

·     802.11r

WLAN Traffic Optimization Command Reference

Covers the commands for optimizing WLAN traffic by using multicast optimization and user isolation. This command reference includes:

·     WLAN multicast optimization

·     User isolation

WLAN Advanced Features Command Reference

Covers the commands for advanced WLAN features, WLAN mesh, AC hierarchy, optimization, and management features. This command reference includes:

·     WLAN optimization

·     Bonjour gateway

User Access and Authentication Command Reference

Covers the commands for configuring wired and wireless access and authentication. This command reference includes:

·     WLAN authentication

·     WLAN IP snooping

·     802.1X

·     MAC authentication

·     Port security

·     Portal

Security Command Reference

Covers the commands for configuring identity authentication (PKI), secure management (password control, public key management, IPsec, and SSH), and security protection (IP source guard and ARP attack protection). This command reference includes:

·     ACL

·     Time range

·     User profile

·     Password control

·     Public key management

·     PKI

·     IPsec

·     SSH

·     Attack detection and prevention

·     ARP attack protection

·     ND attack protection

·     Crypto engine

QoS Command Reference

Covers the commands for configuring wired and wireless QoS. This command reference includes:

·     WLAN QoS (WMM, SVP, bandwidth guaranteeing, and client rate limit)

·     QoS (priority mapping, traffic policing, traffic filtering, and priority marking)

Network Management and Monitoring Command Reference

Covers the commands that help you manage networks, display system information, control network traffic, sample packets, analyze network performance, and debug network connectivity. This command reference includes:

·     System maintenance and debugging (ping, tracert, and system debugging)

·     CWMP

·     NQA

·     SNMP

·     NETCONF

·     Process monitoring and maintenance

Index

Covers all the commands supported by the device.