• 产品与解决方案
  • 行业解决方案
  • 服务
  • 支持
  • 合作伙伴
  • 新华三人才研学中心
  • 关于我们

H3C S12500X-AF & S12500-X & S9800系列以太网交换机 典型配置举例-Release 27xx系列-6W100

目录

29-流量监管典型配置举例

本章节下载 29-流量监管典型配置举例  (251.36 KB)

docurl=/cn/Service/Document_Software/Document_Center/Home/Switches/00-Public/Configure/Typical_Configuration_Example/H3C_S12500X-AF_S12500-X_S9800_CE-6W100/201907/1212649_30005_0.htm

29-流量监管典型配置举例

H3C S12500X-AF & S12500-X & S9800产品 流量监管配置举例

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

资料版本:6W100-20190628

 

Copyright © 2019 新华三技术有限公司 版权所有,保留一切权利。

非经本公司书面许可,任何单位和个人不得擅自摘抄、复制本文档内容的部分或全部,并不得以任何形式传播。

除新华三技术有限公司的商标外,本手册中出现的其它公司的商标、产品标识及商品名称,由各自权利人拥有。

本文档中的信息可能变动,恕不另行通知。

 



1 简介

本文档介绍了流量监管的配置举例。

流量监管就是对流量进行控制,通过监督进入网络的流量速率,对超出部分的流量进行“惩罚”,使进入的流量被限制在一个合理的范围之内,以保护网络资源和运营商的利益。

流量监管分为:聚合CAR和普通CAR。聚合CAR是指能够对多个端口上的业务流使用同一个CAR进行流量监管,即如果多个端口应用同一聚合CAR,则这多个端口的流量之和必须在此聚合CAR设定的流量监管范围之内。普通CAR与聚合CAR不同,在端口上应用的普通CAR无法实现对多个端口的流量之和进行流量监管,不同端口上应用的普通CAR需要单独配置。

2 配置前提

本文档中的配置均是在实验室环境下进行的配置和验证,配置前设备的所有参数均采用出厂时的缺省配置。如果您已经对设备进行了配置,为了保证配置效果,请确认现有配置和以下举例中的配置不冲突。

本文假设您已了解流量监管特性。

3 基于IP地址和协议类型进行流量监管典型配置举例

3.1  组网需求

图3-1所示,某公司网络通过专线接入Internet,上行带宽为60Mbps,所有终端设备均以防火墙作为网关设备。现要求使用流量监管功能,对上行至Internet的流量进行分类限速:

·     HTTP流量:总上行限速为40Mbps,其中研发部25台主机分配15Mbps上行带宽;市场部40台主机分配25Mbps上行带宽。

·     邮件服务器代理所有客户端向外网发送电子邮件,限制上行带宽为2Mbps。

·     远端分支机构可以通过Internet访问FTP服务器,限制上行的FTP的数据流量不超过10Mbps。

图3-1 基于IP地址和协议类型进行流量监管配置组网图

 

3.2  配置思路

要实现对不同特征数据流的流量监管,主要是明确匹配各业务数据的类规则。在本例中,需要使用ACL来匹配各种协议或来源的IP报文,并将这些分类规则与不同的流量监管动作进行绑定,即可实现对不同特征的数据进行不同的速率限制。

3.3  使用版本

本举例进行配置和验证所使用的版本,如表3-1所示。

表3-1 产品与软件版本适配关系

产品

软件版本

S12500X-AF系列交换机

S12500X-CMW710-R2712

S12500-X系列交换机

S12500X-CMW710-R2712

S9800系列交换机

S9800-CMW710-R2712

 

3.4  配置注意事项

在一个流行为中,流量监管动作不能与重标记优先级(包括本地优先级、丢弃优先级、802.1p优先级、DSCP优先级、IP优先级)的动作同时配置,否则会导致该流行为不能被正常应用。

3.5  配置步骤

(1)     配置对研发部HTTP上行流量的限制

# 创建高级IPv4 ACL 3000,匹配研发部发送的HTTP流量(目的TCP端口80)。

<Device> system-view

[Device] acl advanced 3000

[Device-acl-ipv4-adv-3000] rule permit tcp destination-port eq 80 source 192.168.1.0 0.0.0.255

[Device-acl-ipv4-adv-3000] quit

# 创建类rd_http,匹配规则为IPv4 ACL 3000。

[Device] traffic classifier rd_http

[Device-classifier-rd_http] if-match acl 3000

[Device-classifier-rd_http] quit

# 创建流行为rd_http,动作为流量监管,承诺速率15Mbps。

[Device] traffic behavior rd_http

[Device-behavior-rd_http] car cir 15360

[Device-behavior-rd_http] quit

# 创建QoS策略rd_http。

[Device] qos policy rd_http

[Device-qospolicy-rd_http] classifier rd_http behavior rd_http

[Device-qospolicy-rd_http] quit

# 将策略应用到FortyGigE1/0/3端口的入方向。

[Device] interface fortygige 1/0/3

[Device-FortyGigE1/0/3] qos apply policy rd_http inbound

[Device-FortyGigE1/0/3] quit

(2)     配置对市场部HTTP上行流量的限制

#创建高级IPv4 ACL3001,匹配市场部发送的HTTP流量。

[Device] acl advanced 3001

[Device-acl-ipv4-adv-3001] rule permit tcp destination-port eq 80 source 192.168.2.0 0.0.0.255

[Device-acl-ipv4-adv-3001] quit

# 创建类mkt_http,匹配规则为IPv4 ACL 3001。

[Device] traffic classifier mkt_http

[Device-classifier-mkt_http] if-match acl 3001

[Device-classifier-mkt_http] quit

# 创建流行为mkt_http,动作为流量监管,承诺速率为25Mbps。

[Device] traffic behavior mkt_http

[Device-behavior-mkt_http] car cir 25600

[Device-behavior-mkt_http] quit

# 创建QoS策略mkt_http。

[Device] qos policy mkt_http

[Device-qospolicy-mkt_http] classifier mkt_http behavior mkt_http

[Device-qospolicy-mkt_http] quit

# 将策略应用到FortyGigE1/0/4端口的入方向。

[Device] interface fortygige 1/0/4

[Device-FortyGigE1/0/4] qos apply policy mkt_http inbound

[Device-FortyGigE1/0/4] quit

(3)     配置对邮件服务器发送电子邮件流量的限制

# 创建高级IPv4 ACL 3002,匹配邮件服务器向外发送邮件的数据。

[Device] acl advanced 3002

[Device-acl-ipv4-adv-3002] rule permit tcp destination-port eq smtp source 192.168.10.1 0.0.0.0

[Device-acl-ipv4-adv-3002] quit

# 创建类email,匹配规则为IPv4 ACL 3002。

[Device] traffic classifier email

[Device-classifier-email] if-match acl 3002

[Device-classifier-email] quit

# 创建流行为email,动作为流量监管,承诺速率为2Mbps。

[Device] traffic behavior email

[Device-behavior-email] car cir 2048

[Device-behavior-email] quit

# 创建QoS策略email&ftp。

[Device] qos policy email&ftp

[Device-qospolicy-email&ftp] classifier email behavior email

[Device-qospolicy-email&ftp] quit

(4)     配置对分支机构的FTP流量的限制

# 创建基本IPv4 ACL 2001,匹配FTP服务器发送的报文。

[Device] acl basic 2001

[Device-acl-ipv4-basic-2001] rule permit source 192.168.10.2 0.0.0.0

[Device-acl-ipv4-basic-2001] quit

# 创建类ftp,匹配规则为IPv4 ACL 2001。

[Device] traffic classifier ftp

[Device-classifier-ftp] if-match acl 2001

[Device-classifier-ftp] quit

# 创建流行为ftp,动作为流量监管,承诺速率为10Mbps。

[Device] traffic behavior ftp

[Device-behavior-ftp] car cir 10240

[Device-behavior-ftp] quit

# 在QoS策略email&ftp中为类ftp指定流行为ftp。

[Device] qos policy email&ftp

[Device-qospolicy-email&ftp] classifier ftp behavior ftp

[Device-qospolicy-email&ftp] quit

# 将策略应用到FortyGigE1/0/2端口的入方向。

[Device] interface fortygige 1/0/2

[Device-FortyGigE1/0/2] qos apply policy email&ftp inbound

[Device-FortyGigE1/0/2] quit

3.6  验证配置

# 执行display qos policy interface命令查看端口上QoS策略的应用状态。

[Device] display qos policy interface

Interface: FortyGigE1/0/2

  Direction: Inbound

  Policy: email&ftp

   Classifier: email

     Operator: AND

     Rule(s) :

      If-match acl 3002

     Behavior: email

      Committed Access Rate:

        CIR 2048 (kbps), CBS 128000 (Bytes), EBS 0 (Bytes)

        Green action  : pass

        Yellow action : pass

        Red action    : discard

        Green packets : 0 (Packets)

        Red packets   : 0 (Packets)

   Classifier: ftp

     Operator: AND

     Rule(s) :

      If-match acl 2001

     Behavior: ftp

      Committed Access Rate:

        CIR 10240 (kbps), CBS 640000 (Bytes), EBS 0 (Bytes)

        Green action  : pass

        Yellow action : pass

        Red action    : discard

        Green packets : 0 (Packets)

        Red packets   : 0 (Packets)

 

Interface: FortyGigE1/0/3

  Direction: Inbound

  Policy: rd_http

   Classifier: rd_http

     Operator: AND

     Rule(s) :

      If-match acl 3000

     Behavior: rd_http

      Committed Access Rate:

        CIR 15360 (kbps), CBS 960000 (Bytes), EBS 0 (Bytes)

        Green action  : pass

        Yellow action : pass

        Red action    : discard

        Green packets : 0 (Packets)

        Red packets   : 0 (Packets)

 

Interface: FortyGigE1/0/4

  Direction: Inbound

  Policy: mkt_http

   Classifier: mkt_http

     Operator: AND

     Rule(s) :

      If-match acl 3001

     Behavior: mkt_http

      Committed Access Rate:

        CIR 25600 (kbps), CBS 1600000 (Bytes), EBS 0 (Bytes)

        Green action  : pass

        Yellow action : pass

        Red action    : discard

        Green packets : 0 (Packets)

        Red packets   : 0 (Packets)

3.7  配置文件

#

traffic classifier email operator and

 if-match acl 3002

#

traffic classifier ftp operator and

 if-match acl 2001

#

traffic classifier mkt_http operator and

 if-match acl 3001

#

traffic classifier rd_http operator and

 if-match acl 3000

#

traffic behavior email

 car cir 2048 cbs 128000 ebs 0 green pass red discard yellow pass

#

traffic behavior ftp

 car cir 10240 cbs 640000 ebs 0 green pass red discard yellow pass

#

traffic behavior mkt_http

 car cir 25600 cbs 1600000 ebs 0 green pass red discard yellow pass

#

traffic behavior rd_http

 car cir 15360 cbs 960000 ebs 0 green pass red discard yellow pass

#

qos policy email&ftp

 classifier email behavior email

 classifier ftp behavior ftp

#

qos policy mkt_http

 classifier mkt_http behavior mkt_http

#

qos policy rd_http

 classifier rd_http behavior rd_http

#

interface FortyGigE1/0/2

 port link-mode bridge

 qos apply policy email&ftp inbound

#

interface FortyGigE1/0/3

 port link-mode bridge

 qos apply policy rd_http inbound

#

interface FortyGigE1/0/4

 port link-mode bridge

 qos apply policy mkt_http inbound

#

acl basic 2001

 rule 0 permit source 192.168.10.2 0

#

acl advanced 3000

 rule 0 permit tcp source 192.168.1.0 0.0.0.255 destination-port eq www

#

acl advanced 3001

 rule 0 permit tcp source 192.168.2.0 0.0.0.255 destination-port eq www

#

acl advanced 3002

 rule 0 permit tcp source 192.168.10.1 0 destination-port eq smtp

4 聚合CAR典型配置举例

4.1  组网需求

图4-1 聚合CAR配置组网示意图

 

现有组网如图4-1所示,要求通过配置聚合CAR功能,对端口FortyGigE1/0/1接收的VLAN10和VLAN100的报文流量之和进行限制,限制速率为200M,对超出流量限制的报文采取丢弃策略。

4.2  使用版本

本举例进行配置和验证所使用的版本,如表4-1所示。

表4-1 产品与软件版本适配关系

产品

软件版本

S12500X-AF系列交换机

S12500X-CMW710-R2712

S12500-X系列交换机

S12500X-CMW710-R2712

S9800系列交换机

S9800-CMW710-R2712

 

4.3  配置注意事项

在一个流行为中,引用聚合CAR的动作不能与重标记优先级(包括本地优先级、丢弃优先级、802.1p优先级、DSCP优先级、IP优先级)的动作同时配置,否则会导致该流行为不能被正常应用。

4.4  配置步骤

说明

在执行以下配置步骤前,请先配置接入层设备为VLAN10和VLAN100的流量添加VLAN标签,并上行发送至设备Device。

 

# 配置端口FortyGigE1/0/1为Trunk端口,允许VLAN10和VLAN100通过,取消允许VLAN1通过。

<Device> system-view

[Device] interface fortygige 1/0/1

[Device-FortyGigE1/0/1] port link-type trunk

[Device-FortyGigE1/0/1] port trunk permit vlan 10 100

[Device-FortyGigE1/0/1] undo port trunk permit vlan 1

[Device-FortyGigE1/0/1] quit

# 按流量限制需求配置聚合CAR。

[Device] qos car aggcar-1 aggregative cir 204800

# 配置流分类和流行为,对VLAN10的报文采用聚合CAR的限速配置。

[Device] traffic classifier 1

[Device-classifier-1] if-match service-vlan-id 10

[Device-classifier-1] quit

[Device] traffic behavior 1

[Device-behavior-1] car name aggcar-1

[Device-behavior-1] quit

# 配置流分类和流行为,对VLAN100的报文采用聚合CAR的限速配置。

[Device] traffic classifier 2

[Device-classifier-2] if-match service-vlan-id 100

[Device-classifier-2] quit

[Device] traffic behavior 2

[Device-behavior-2] car name aggcar-1

[Device-behavior-2] quit

# 配置QoS策略car,将流分类与流行为进行绑定。

[Device] qos policy car

[Device-qospolicy-car] classifier 1 behavior 1

[Device-qospolicy-car] classifier 2 behavior 2

[Device-qospolicy-car] quit

# 将QoS策略car应用到端口FortyGigE1/0/1的入方向。

[Device] interface fortygige 1/0/1

[Device-FortyGigE1/0/1] qos apply policy car inbound

4.5  验证配置

# 执行display qos policy interface命令查看端口上QoS策略的应用状态。此处以FortyGigE1/0/1为例。

[Device]display qos policy interface fortygige 1/0/1

Interface: FortyGigE1/0/1

  Direction: Inbound

  Policy: car

   Classifier: 1

     Operator: AND

     Rule(s) :

      If-match service-vlan-id 10

     Behavior: 1

      Committed Access Rate:

        Car name: aggcar-1

   Classifier: 2

     Operator: AND

     Rule(s) :

      If-match service-vlan-id 100

     Behavior: 2

      Committed Access Rate:

        Car name: aggcar-1

4.6  配置文件

#

 qos car aggcar-1 aggregative cir 204800 cbs 12800000 ebs 0 green pass yellow pass red discard

#

traffic classifier 1 operator and

 if-match service-vlan-id 10

traffic classifier 2 operator and

 if-match service-vlan-id 100

#

traffic behavior 1

 car name aggcar-1

traffic behavior 2

 car name aggcar-1

#

qos policy car

 classifier 1 behavior 1

 classifier 2 behavior 2

#

interface FortyGigE1/0/1

 port link-mode bridge

 port link-type trunk

 undo port trunk permit vlan 1

 port trunk permit vlan 10 100

 qos apply policy car inbound

5 相关资料

·     H3C S12500X-AF & S12500-X & S9800系列交换机 ACL和QoS配置指导(R27xx)

·     H3C S12500X-AF & S12500-X & S9800系列交换机 ACL和QoS命令参考(R27xx)

不同款型规格的资料略有差异, 详细信息请向具体销售和400咨询。H3C保留在没有任何通知或提示的情况下对资料内容进行修改的权利!

新华三官网
联系我们