11-License管理命令
本章节下载: 11-License管理命令 (132.35 KB)
1.1.2 display license device-id
1.1.4 license activation-file install
1.1.5 license activation-file uninstall
仅WX2500H-WiNet系列不支持slot参数。
display license命令用来显示License的详细信息。
【命令】
display license [ activation-file ] [ slot slot-number ]
【视图】
任意视图
【缺省用户角色】
network-admin
network-operator
【参数】
activation-file:显示设备上已存在的激活文件相关信息。
slot slot-number:显示指定成员设备上安装的License信息。slot-number表示设备在IRF中的成员编号。不指定该参数时,显示所有成员设备上的License信息。
【使用指导】
通过display license命令显示全部License的详细信息时,根据设备的负载不同,需要等待相应时间。
【举例】
# 显示IRF中所有License的详细信息。
<Sysname> display license
flash:/license/219801A1RCH1330000162018051520205443215.ak
Feature: APMGR
Product Description: Enhanced Access Controller License,1 AP,for Verticals,for V7
Registered at: 2018-01-01 00:30:17
License Type: Trial (days restricted)
Trial Time Left (days): 26
Current State: In use
表1-1 display license命令显示信息描述表
字段 |
描述 |
Feature |
特性名称 |
Product Description |
激活文件产品描述信息 |
Registered at |
在设备上的安装时间 |
License Type |
License的类型,取值为: · NA:无法获取License的类型 · Permanent:永久类型,表示该License永远有效,不会过期 · Days restricted:相对时间类型,表示该License是正式发布的,且有效期是一个相对时间段,比如30天 · Trial (days restricted):相对时间类型的试用License,表示该License是相对时间类型的、非正式发布的License |
Trial Time Left (days) |
临时授权相对时间类型剩余时间 |
Time Left (days) |
正式授权相对时间类型剩余时间 |
Current State |
License当前状态取值为: · In use:当前License正在使用 · Usable:当前License正在等待使用(当设备同时安装了多个相对时间License,且多个License均支持某一特性时,则只有一个License中的该特性处于In use状态,其它License中的该特性会处于Usable状态。) · Expired:当前License已过期 · Uninstalled:当前License已卸载 · Unusable:当前License无法使用 · Invalid:不合法的数据,无法使用 |
Uninstall Key |
卸载码 |
Uninstall Date |
卸载日期 |
display license device-id命令用来显示设备的SN、CHECK_SUM和DID信息。
【命令】
display license device-id slot slot-number
【视图】
任意视图
【缺省用户角色】
network-admin
network-operator
【参数】
slot slot-number:表示设备在IRF中的成员编号。
【使用指导】
生成License激活文件需要使用DID和SN,用来表示激活文件和设备的绑定关系。
DID在执行压缩命令的时候会发生变化。因此,请在申请激活文件前,查询设备的DID信息。
DID为文件形式,在申请License激活文件时,需通过申请页面上传该文件。
【举例】
# 显示设备的SN和DID信息。
<Sysname> display license device-id
SN: 219801A1RCH133000016
SN CHECK_SUM: A64BD8AC
Device ID: flash:/license/219801A1RCH133000016.did
表1-2 display license device-id命令显示信息描述表
字段 |
描述 |
SN |
序列号信息,用于生成激活文件 |
SN CHECK_SUM |
序列号校验码 |
Device ID |
设备编号信息,用于生成激活文件 |
display license feature命令用来显示特性的License摘要信息。
【命令】
display license feature
【视图】
任意视图
【缺省用户角色】
network-admin
network-operator
【使用指导】
License摘要信息包括哪些特性需要安装License,以及已安装的License的简要信息。
【举例】
# 显示特性的License摘要信息。
<Sysname> display license feature
Total: 128 Usage: 2
Feature Licensed State
APMGR Y Trial
表1-3 display license feature命令显示信息描述表
字段 |
描述 |
Slot n |
n号成员备上的License摘要信息 |
Total |
设备上一共可安装License的总数目 |
Usage |
设备上已经安装的License总数 |
Feature |
需要License授权才能使用的业务特性的名称 |
Licensed |
是否已经授权 · N表示未授权 · Y表示已授权 |
State |
License的当前状态: · Formal表示当前已经为该特性安装了正式License,License处于有效状态 · Trail表示当前已经为该特性安装了临时License,License处于有效状态 · -表示当前无有效License,用户如需使用该特性,请安装对应的License |
license activation-file install命令用来安装License的激活文件。
【命令】
license activation-file install file-name slot slot-number
【视图】
系统视图
【缺省用户角色】
network-admin
【参数】
file-name:激活文件的全路径,为1~127个字符的字符串,区分大小写。激活文件必须合法、有效,并且保存在设备存储介质上。
slot slot-number:表示给成员设备安装激活文件,成员设备安装激活文件后,即便加入别的IRF,也具有运行相应特性的授权。slot-number表示设备在IRF中的成员编号。
【使用指导】
激活文件是用户购买的激活受控特性的凭证。激活文件安装到设备上后,对应的特性得到授权,可以正常使用。
【举例】
# 给设备安装激活文件20130812.ak。
<Sysname> system-view
[Sysname] license activation-file install flash:/license/20130812.ak
This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...
【相关命令】
· display license activation-file
· license activation-file uninstall
license activation-file uninstall命令用来卸载License的激活文件。
【命令】
license activation-file uninstall file-name slot slot-number
【视图】
系统视图
【缺省用户角色】
network-admin
【参数】
file-name:激活文件的全路径,为1~127个字符的字符串,区分大小写。
slot slot-number:表示给成员设备卸载激活文件,成员设备卸载激活文件后,将不能使用该激活文件包含的特性。slot-number表示设备在IRF中的成员编号。
【使用指导】
当用户购买的正式激活文件还没有到期,并且在当前设备上不需要再使用时,可以卸载该激活文件,此时设备会产生一个卸载凭证——卸载文件。用户可以将该卸载凭证和其它设备绑定,获取一个新的激活文件,并在新设备上安装,从而将License从当前设备迁移到其它设备。
需要注意的是:
· 激活文件被卸载后,对应的特性将无法获得被卸载的激活文件的信息,特性无法运行。
· 如果卸载的是临时激活文件,则不会产生卸载文件;如果卸载的是正式激活文件,则会产生卸载文件。
【举例】
# 给设备卸载正式激活文件flash:/license/20130812.ak。
<Sysname> system-view
[Sysname] license activation-file uninstall flash:/license/20130812.ak
This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...
Uninstall file: flash:/license/20130812.uak
· display license activation-file
· license activation-file install
license compress命令用来压缩License存储区。
【命令】
license compress slot slot-number
【视图】
系统视图
【缺省用户角色】
network-admin
【参数】
slot slot-number:表示对指定成员设备的License存储区进行压缩,成员设备将删除无效的License数据,对License存储区空间进行释放,用于安装新的激活信息。slot-number表示设备在IRF中的成员编号。
【使用指导】
License存储区空间是有限的。执行该命令后,系统会自动判断各License的状态,将过期和卸载的License以及相关数据删除。从而释放空间,以便用户安装新的License。
需要注意的是,请在执行该命令前,保存各卸载License的卸载码。因为执行该命令后,卸载码会被删除。
【举例】
# 给设备压缩License存储区。
<Sysname> system-view
[Sysname] license compress
This command will delete all data relevant to uninstalled and expired keys/licenses, including Uninstall keys, and create a new device ID for activation keys/files.Make sure you have saved the Uninstall keys so you can apply for a new activation key/file for the unexpired licenses that were covered by the uninstalled activation keys/files.
Are you sure you want to continue? [Y/N]: Y
This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...
不同款型规格的资料略有差异, 详细信息请向具体销售和400咨询。H3C保留在没有任何通知或提示的情况下对资料内容进行修改的权利!